From: Shawn Guo <shengchao.guo@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Manivannan Sadhasivam <mani@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Shawn Guo <shengchao.guo@oss.qualcomm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v5 2/3] dt-bindings: remoteproc: qcom,nord-pas: Document Nord PAS
Date: Wed, 29 Jul 2026 10:35:07 +0800 [thread overview]
Message-ID: <20260729023508.879752-3-shengchao.guo@oss.qualcomm.com> (raw)
In-Reply-To: <20260729023508.879752-1-shengchao.guo@oss.qualcomm.com>
Add a dedicated binding for the Qualcomm Nord SoC PAS devices: ADSP
and CDSPs. Nord ADSP uses CX and MX power domains while the CDSPs
add an NSP domain on top of that.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
.../bindings/remoteproc/qcom,nord-pas.yaml | 173 ++++++++++++++++++
1 file changed, 173 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,nord-pas.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,nord-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,nord-pas.yaml
new file mode 100644
index 000000000000..e90d2953ba69
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,nord-pas.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,nord-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Nord SoC Peripheral Authentication Service
+
+maintainers:
+ - Shawn Guo <shengchao.guo@oss.qualcomm.com>
+
+description:
+ Qualcomm Nord SoC Peripheral Authentication Service loads and boots firmware
+ on the Qualcomm DSP Hexagon cores.
+
+properties:
+ compatible:
+ enum:
+ - qcom,nord-adsp-pas
+ - qcom,nord-cdsp0-pas
+ - qcom,nord-cdsp1-pas
+ - qcom,nord-cdsp2-pas
+ - qcom,nord-cdsp3-pas
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: CX power domain
+ - description: MX power domain
+ - description: NSP power domain
+
+ power-domain-names:
+ minItems: 2
+ items:
+ - const: cx
+ - const: mx
+ - const: nsp
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XO clock
+
+ clock-names:
+ items:
+ - const: xo
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ smd-edge: false
+
+ firmware-name:
+ items:
+ - description: Firmware name of the Hexagon core
+ - description: Firmware name of the Hexagon Devicetree
+
+ memory-region:
+ items:
+ - description: Memory region for main Firmware authentication
+ - description: Memory region for Devicetree Firmware authentication
+
+ interrupts:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+ - description: Shutdown acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+ - const: shutdown-ack
+
+ qcom,smem-states:
+ maxItems: 1
+ description: States used by the AP to signal the Hexagon core
+
+ qcom,smem-state-names:
+ maxItems: 1
+ description: The names of the state bits used for SMP2P output
+
+required:
+ - compatible
+ - reg
+ - memory-region
+
+allOf:
+ - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,nord-adsp-pas
+ then:
+ properties:
+ power-domains:
+ maxItems: 2
+ power-domain-names:
+ maxItems: 2
+ else:
+ properties:
+ power-domains:
+ minItems: 3
+ power-domain-names:
+ minItems: 3
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+ #define IPCC_MPROC_ADSP0
+
+ remoteproc@4c00000 {
+ compatible = "qcom,nord-adsp-pas";
+ reg = <0x04c00000 0x10000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interrupts-extended = <&intc GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ memory-region = <&hpass_dsp0_mem>, <&hpass_dsp0_dtb_mem>;
+
+ firmware-name = "qcom/nord/adsp.mbn",
+ "qcom/nord/adsp_dtb.mbn";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MX>;
+ power-domain-names = "cx",
+ "mx";
+
+ qcom,qmp = <&aoss_qmp>;
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_MPROC_ADSP0
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_MPROC_ADSP0 IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "adsp";
+ qcom,remote-pid = <2>;
+
+ /* ... */
+ };
+ };
--
2.43.0
next prev parent reply other threads:[~2026-07-29 2:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 2:35 [PATCH v5 0/3] Add ADSP and CDSP support for Nord SoC Shawn Guo
2026-07-29 2:35 ` [PATCH v5 1/3] dt-bindings: soc: qcom,aoss-qmp: Document Nord AOSS side channel Shawn Guo
2026-07-29 2:35 ` Shawn Guo [this message]
2026-07-29 2:35 ` [PATCH v5 3/3] remoteproc: qcom: pas: Add Nord ADSP and CDSP support Shawn Guo
2026-07-31 3:26 ` (subset) [PATCH v5 0/3] Add ADSP and CDSP support for Nord SoC Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729023508.879752-3-shengchao.guo@oss.qualcomm.com \
--to=shengchao.guo@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mani@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®