From: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>,
Amit Kucheria <amit.kucheria@oss.qualcomm.com>,
Konrad Dybcio <konradybcio@kernel.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@kernel.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>,
Manivannan Sadhasivam <mani@kernel.org>,
Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>,
Kees Cook <kees@kernel.org>,
"Gustavo A. R. Silva" <gustavoars@kernel.org>,
cros-qcom-dts-watchers@chromium.org
Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-hardening@vger.kernel.org,
manaf.pallikunhi@oss.qualcomm.com,
Dipa Ramesh Mantre <dipa.mantre@oss.qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Subject: [PATCH v7 9/9] arm64: dts: qcom: hamoa: Enable CDSP cooling
Date: Fri, 31 Jul 2026 16:03:49 +0530 [thread overview]
Message-ID: <20260731-b4-qmi-tmd-v7-9-3befd44403d5@oss.qualcomm.com> (raw)
In-Reply-To: <20260731-b4-qmi-tmd-v7-0-3befd44403d5@oss.qualcomm.com>
From: Dipa Ramesh Mantre <dipa.mantre@oss.qualcomm.com>
Unlike the CPU, the CDSP does not throttle its speed automatically
when it reaches high temperatures in hamoa.
Set up CDSP cooling by throttling the cdsp, when it reaches 95°C.
Add polling-delay-passive so the governor periodically evaluates
the zone during passive cooling and steps up cooling levels when
temperature stabilizes below the next trip.
Signed-off-by: Dipa Ramesh Mantre <dipa.mantre@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 32 +++++++++++++++
arch/arm64/boot/dts/qcom/hamoa.dtsi | 63 ++++++++++++++++++++++++++++++
2 files changed, 95 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
index 9fa86bb6438e..a146be1cb5fb 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -1684,4 +1684,36 @@ trip-point0 {
};
};
};
+
+ nsp0-thermal {
+ trips {
+ trip-point1 {
+ temperature = <105000>;
+ };
+ };
+ };
+
+ nsp1-thermal {
+ trips {
+ trip-point1 {
+ temperature = <105000>;
+ };
+ };
+ };
+
+ nsp2-thermal {
+ trips {
+ trip-point1 {
+ temperature = <105000>;
+ };
+ };
+ };
+
+ nsp3-thermal {
+ trips {
+ trip-point1 {
+ temperature = <105000>;
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 09527dcf9576..ba453c8ca80d 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -23,6 +23,7 @@
#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/qcom,pas.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -8971,6 +8972,8 @@ remoteproc_cdsp: remoteproc@32300000 {
status = "disabled";
+ #cooling-cells = <3>;
+
glink-edge {
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_GLINK_QMP
@@ -9558,6 +9561,7 @@ aoss0-critical {
};
thermal_nsp0: nsp0-thermal {
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 1>;
trips {
@@ -9567,15 +9571,30 @@ trip-point0 {
type = "hot";
};
+ nsp0_alert0: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
nsp0-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&nsp0_alert0>;
+ cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
thermal_nsp1: nsp1-thermal {
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 2>;
trips {
@@ -9585,15 +9604,30 @@ trip-point0 {
type = "hot";
};
+ nsp1_alert0: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
nsp1-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&nsp1_alert0>;
+ cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
thermal_nsp2: nsp2-thermal {
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 3>;
trips {
@@ -9603,15 +9637,30 @@ trip-point0 {
type = "hot";
};
+ nsp2_alert0: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
nsp2-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&nsp2_alert0>;
+ cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
thermal_nsp3: nsp3-thermal {
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 4>;
trips {
@@ -9621,12 +9670,26 @@ trip-point0 {
type = "hot";
};
+ nsp3_alert0: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
nsp3-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&nsp3_alert0>;
+ cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
thermal_gpuss_0: gpuss-0-thermal {
--
2.34.1
next prev parent reply other threads:[~2026-07-31 10:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-31 10:33 [PATCH v7 0/9] Add support for Qualcomm remoteproc subsystem cooling Gaurav Kohli
2026-07-31 10:33 ` [PATCH v7 1/9] dt-bindings: remoteproc: qcom,pas: add #cooling-cells property Gaurav Kohli
2026-08-06 7:16 ` Krzysztof Kozlowski
2026-07-31 10:33 ` [PATCH v7 2/9] soc: qcom: Add QMI TMD support for remote thermal mitigation Gaurav Kohli
2026-07-31 10:33 ` [PATCH v7 3/9] remoteproc: qcom: pas: add support for TMD thermal cooling devices Gaurav Kohli
2026-07-31 10:33 ` [PATCH v7 4/9] remoteproc: qcom_q6v5_pas: enable QMI TMD cooling support Gaurav Kohli
2026-07-31 10:33 ` [PATCH v7 5/9] arm64: dts: qcom: kodiak: Enable CDSP & Modem cooling Gaurav Kohli
2026-07-31 10:33 ` [PATCH v7 6/9] arm64: dts: qcom: lemans: Enable CDSP cooling Gaurav Kohli
2026-07-31 10:33 ` [PATCH v7 7/9] arm64: dts: qcom: talos: " Gaurav Kohli
2026-07-31 10:33 ` [PATCH v7 8/9] arm64: dts: qcom: monaco: " Gaurav Kohli
2026-07-31 10:33 ` Gaurav Kohli [this message]
2026-07-31 11:20 ` [PATCH v7 9/9] arm64: dts: qcom: hamoa: " Stephan Gerhold
2026-07-31 13:22 ` Gaurav Kohli
2026-08-09 12:33 ` Gaurav Kohli
2026-07-31 11:59 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260731-b4-qmi-tmd-v7-9-3befd44403d5@oss.qualcomm.com \
--to=gaurav.kohli@oss.qualcomm.com \
--cc=amit.kucheria@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=daniel.lezcano@kernel.org \
--cc=daniel.lezcano@oss.qualcomm.com \
--cc=devicetree@vger.kernel.org \
--cc=dipa.mantre@oss.qualcomm.com \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=gustavoars@kernel.org \
--cc=kees@kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=manaf.pallikunhi@oss.qualcomm.com \
--cc=mani@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®