Re: [PATCH v10 01/14] dt-bindings: media: qcom,glymur-iris: Add glymur video codec

[Krzysztof Kozlowski <krzk@kernel.org>]

On Sun, Jul 26, 2026 at 11:19:31AM +0530, Vishnu Reddy wrote:
> Add device tree binding for the Qualcomm Glymur Iris video codec. Glymur
> is a new generation of video IP that introduces a dual-core architecture.
> The second core brings its own power domain, clocks, and reset lines,
> requiring additional power domains and clocks in the power sequence.
> The current maxItems constraints for clocks and power-domains in the
> common venus schema were sized for platforms available at the time of
> authoring. The glymur platform introduces a dual core architecture
> that requires more clocks and power domains, exceeding these limits.
> Raise maxItems for clocks, clock-names, power-domains and
> power-domain-names to accommodate the glymur platform.
> The glymur platform-specific schema have fixed constraints for these
> properties, so the common schema only acts as an upper bound.
> 
> Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
> ---
>  .../bindings/media/qcom,glymur-iris.yaml           | 257 +++++++++++++++++++++
>  .../bindings/media/qcom,venus-common.yaml          |   8 +-
>  2 files changed, 261 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/qcom,glymur-iris.yaml b/Documentation/devicetree/bindings/media/qcom,glymur-iris.yaml
> new file mode 100644
> index 000000000000..1bb16206d859
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,glymur-iris.yaml
> @@ -0,0 +1,257 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,glymur-iris.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Glymur SoC Iris video encoder and decoder
> +
> +maintainers:
> +  - Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
> +
> +description:
> +  The Iris video processing unit on Qualcomm Glymur SoC is a video encode and
> +  decode accelerator.
> +
> +properties:
> +  compatible:
> +    const: qcom,glymur-iris
> +
> +  clocks:
> +    maxItems: 9
> +
> +  clock-names:
> +    items:
> +      - const: core_iface
> +      - const: core
> +      - const: vcodec0_core
> +      - const: vcodec0_iface
> +      - const: core_freerun
> +      - const: vcodec0_core_freerun
> +      - const: vcodec1_iface
> +      - const: vcodec1_core
> +      - const: vcodec1_core_freerun
> +
> +  dma-coherent: true
> +
> +  interconnects:
> +    maxItems: 2
> +
> +  interconnect-names:
> +    items:
> +      - const: cpu-cfg
> +      - const: video-mem
> +
> +  '#address-cells':
> +    const: 2
> +
> +  '#size-cells':
> +    const: 2

Rob already commented on these. And then he clarified, so you cannot
send the same code.

Best regards,
Krzysztof