[PATCH 0/3] iio: adc: ade9000: series of probe and channel fixes

[Antoniu Miclaus <antoniu.miclaus@analog.com>]

This series fixes three issues in the ade9000 driver, all present since
the driver was added.

Patch 1 moves the interrupt requests after the vdd regulator is enabled,
so an early interrupt no longer runs a handler doing SPI accesses against
an unpowered chip.

Patch 2 corrects the overlapping scan_index values for the current and
voltage channels, which caused the Phase B and C waveform buffers to be
configured incorrectly.

Patch 3 fixes the STATUS1 event scan bound so that Phase C dip events
(bit 25) are actually reported.

Antoniu Miclaus (3):
  iio: adc: ade9000: request interrupts after powering the device
  iio: adc: ade9000: fix overlapping scan_index for current and voltage
    channels
  iio: adc: ade9000: handle Phase C dip events in IRQ1 handler

 drivers/iio/adc/ade9000.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

-- 
2.43.0