From: Akash Sukhavasi <akash.sukhavasi@gmail.com>
To: Doug Anderson <dianders@chromium.org>,
Linus Walleij <linusw@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Akash Sukhavasi <akash.sukhavasi@gmail.com>
Subject: [PATCH v2] drm/panel: samsung-s6d16d0: Use mipi_dsi_*_multi(); fix minor bugs
Date: Mon, 10 Aug 2026 18:45:40 -0500 [thread overview]
Message-ID: <20260810-mipi-dsi-s6d16d0-multi-v2-1-8fcdfbf9bbd2@gmail.com> (raw)
The mipi_dsi_dcs_*() functions used by this driver are deprecated
in favour of their _multi() counterparts, as noted in
Documentation/gpu/todo.rst. The _multi() variants record the
first error in a context structure and skip subsequent calls once
an error is set, removing the need to check the return value
after each command. They also log failures internally, making the
per-call dev_err() calls redundant.
Convert prepare(), enable(), disable(), and unprepare() to use
mipi_dsi_dcs_*_multi().
unprepare() previously returned an error if
mipi_dsi_dcs_enter_sleep_mode() failed, skipping RESET assertion
and regulator_disable(). Because drm_panel_unprepare() does not
clear panel->prepared when the callback returns an error,
drm_panel_prepare() would then return early on the next call,
leaving the panel powered and unable to be re-initialised. The
converted code always asserts RESET, disables the regulator, and
returns 0.
Also fix a typo in a comment ("Enabe" -> "Enable").
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
---
Compile tested only, no hardware available. checkpatch and a W=1
build are clean.
---
Changes in v2:
- Keep intermediate dsi variable for readability, per Neil's review.
- Add comment explaining why accum_err is not checked in unprepare().
- Simplify prepare() to a single return path.
- Link to v1: https://lore.kernel.org/r/20260807-mipi-dsi-s6d16d0-multi-v1-1-c6179f6f3c98@gmail.com
---
drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 55 +++++++++------------------
1 file changed, 17 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
index 54a65abf7e89..e734fffa45a4 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
@@ -48,14 +48,10 @@ static int s6d16d0_unprepare(struct drm_panel *panel)
{
struct s6d16d0 *s6 = panel_to_s6d16d0(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev);
- int ret;
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
- /* Enter sleep mode */
- ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
- if (ret) {
- dev_err(s6->dev, "failed to enter sleep mode (%d)\n", ret);
- return ret;
- }
+ /* Enter sleep mode; error does not prevent power-off */
+ mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
/* Assert RESET */
gpiod_set_value_cansleep(s6->reset_gpio, 1);
@@ -68,6 +64,7 @@ static int s6d16d0_prepare(struct drm_panel *panel)
{
struct s6d16d0 *s6 = panel_to_s6d16d0(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev);
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
int ret;
ret = regulator_enable(s6->supply);
@@ -83,57 +80,39 @@ static int s6d16d0_prepare(struct drm_panel *panel)
gpiod_set_value_cansleep(s6->reset_gpio, 0);
msleep(120);
- /* Enabe tearing mode: send TE (tearing effect) at VBLANK */
- ret = mipi_dsi_dcs_set_tear_on(dsi,
+ /* Enable tearing mode: send TE (tearing effect) at VBLANK */
+ mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx,
MIPI_DSI_DCS_TEAR_MODE_VBLANK);
- if (ret) {
- dev_err(s6->dev, "failed to enable vblank TE (%d)\n", ret);
- goto err_power_off;
- }
/* Exit sleep mode and power on */
- ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
- if (ret) {
- dev_err(s6->dev, "failed to exit sleep mode (%d)\n", ret);
- goto err_power_off;
+ mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+ if (dsi_ctx.accum_err) {
+ gpiod_set_value_cansleep(s6->reset_gpio, 1);
+ regulator_disable(s6->supply);
}
- return 0;
-
-err_power_off:
- gpiod_set_value_cansleep(s6->reset_gpio, 1);
- regulator_disable(s6->supply);
-
- return ret;
+ return dsi_ctx.accum_err;
}
static int s6d16d0_enable(struct drm_panel *panel)
{
struct s6d16d0 *s6 = panel_to_s6d16d0(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev);
- int ret;
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
- ret = mipi_dsi_dcs_set_display_on(dsi);
- if (ret) {
- dev_err(s6->dev, "failed to turn display on (%d)\n", ret);
- return ret;
- }
+ mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
- return 0;
+ return dsi_ctx.accum_err;
}
static int s6d16d0_disable(struct drm_panel *panel)
{
struct s6d16d0 *s6 = panel_to_s6d16d0(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev);
- int ret;
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
- ret = mipi_dsi_dcs_set_display_off(dsi);
- if (ret) {
- dev_err(s6->dev, "failed to turn display off (%d)\n", ret);
- return ret;
- }
+ mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
- return 0;
+ return dsi_ctx.accum_err;
}
static int s6d16d0_get_modes(struct drm_panel *panel,
---
base-commit: dc2f9f7fed1a8ea5290f9f60c6310d497e85e666
change-id: 20260807-mipi-dsi-s6d16d0-multi-167e236e9666
Best regards,
--
Akash Sukhavasi <akash.sukhavasi@gmail.com>
next reply other threads:[~2026-08-10 23:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-10 23:45 Akash Sukhavasi [this message]
2026-08-11 7:21 ` Neil Armstrong
2026-08-14 7:17 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260810-mipi-dsi-s6d16d0-multi-v2-1-8fcdfbf9bbd2@gmail.com \
--to=akash.sukhavasi@gmail.com \
--cc=airlied@gmail.com \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=linusw@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®