mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Christian Brauner <brauner@kernel.org>
To: Xin Zhao <jackzxcui1989@163.com>
Cc: david@kernel.org, ljs@kernel.org, rppt@kernel.org,
	pfalcato@suse.de,  viro@zeniv.linux.org.uk, corbet@lwn.net,
	skhan@linuxfoundation.org,  akpm@linux-foundation.org,
	liam@infradead.org, vbabka@kernel.org, surenb@google.com,
	 mhocko@suse.com, mingo@redhat.com, peterz@infradead.org,
	juri.lelli@redhat.com,  vincent.guittot@linaro.org,
	mjguzik@gmail.com, ebiederm@xmission.com, jack@suse.cz,
	 jlayton@kernel.org, chuck.lever@oracle.com,
	alex.aring@gmail.com, arnd@arndb.de,  keescook@chromium.org,
	mcgrof@kernel.org, j.granados@samsung.com, allen.lkml@gmail.com,
	 rdunlap@infradead.org, kuba@kernel.org,
	linux-fsdevel@vger.kernel.org,  linux-kernel@vger.kernel.org,
	linux-arch@vger.kernel.org, linux-mm@kvack.org,
	 linux-doc@vger.kernel.org
Subject: Re: [PATCH v8] coredump: Add bit 9 of coredump_filter for pre-exit files before dumping
Date: Tue, 11 Aug 2026 11:09:47 +0200	[thread overview]
Message-ID: <20260811-zerfallen-boiler-bissfest-cdb998278337@brauner> (raw)
In-Reply-To: <20260808052732.2589657-1-jackzxcui1989@163.com>

On Sat, Aug 08, 2026 at 01:27:32PM +0800, Xin Zhao wrote:
> A coredump typically takes seconds or even longer to complete. If we
> happen to hold a write lock with flock just before triggering the
> coredump, that write lock will not be released during the entire coredump
> process. As a result, other processes attempting to acquire the same write
> lock may experience significant delays. Another typical scenario is that
> some custom management modules for shared memory also need to release the
> reference counts of the related buffers as soon as possible, rather than
> waiting until the coredump is complete.
> 
> Add a new bit(9) of coredump_filter to tag whether need to dump fd list.
> We set it by default because tools like systemd-coredump go through the
> fds. Some other coredump pipe programs like minicoredump do not use fds by
> default. If you are sure that your coredump backend does not use the fds,
> you can clear bit 9, which will allow some file resources without VMA
> references to be released earlier.
> 
> In fput(), check FP_DUMPCORE task flags to NOT release file by task work,
> otherwise file put operation will NOT execute util coredump finish.
> 
> Test Case One - flock
> Test program send signal SIGABRT to the program which owns the flock,
> output the wait time(unit ms) to successfully attach the flock.
> Test program malloc 500MB heap and memset it.
> If NOT set bit9 of coredump_filter, waitms is 11280.
> If set bit9 of coredump_filter, waitms is 0.
> 
> Test Case Two - ion buffer
> Test programs include ion buffer publisher and ion buffer subscriber.
> Ion buffer publisher output the ion buffer hold_time if the subscriber
> NOT send ack to publisher and NOT release it. The subscriber will trig
> coredump by itself in some time.
> If NOT set bit9 of subscriber coredump_filter, max hold_time is 19591ms.
> If set bit9 of subscriber coredump_filter, max hold_time is 320ms.
> 
> Signed-off-by: Xin Zhao <jackzxcui1989@163.com>
> ---
> 
> Change in v8:
> - Delete the duplicate description of default value of coredump_filter in
>   proc.rst, as suggested by Randy Dunlap.
> 
> Change in v7:
> - Fix description error in proc.rst. Since bit9 has been added, the
>   supported memory types should now be 10,
>   as suggested by David Hildenbrand (Arm).
> - Link to v7: https://lore.kernel.org/all/20260807040124.1706927-1-jackzxcui1989@163.com/
> 
> Change in v6:
> - Fix operator precedence in PF_KTHREAD/PF_DUMPCORE check.
> - Link to v6: https://lore.kernel.org/all/20260804001703.1340667-1-jackzxcui1989@163.com/
> 
> Change in v5:
> - Not add another bootargs for the feature,
>   as suggested by Christian Brauner and Lorenzo Stoakes.
>   Add bit9 of coredump_filter to tag whether need to dump fd list.
>   Set bit9 to 1 as default.
> - Al Viro, Christian Brauner and Lorenzo Stoakes point out so many
>   problems of the code related to umap that was added in v4, delete all of
>   it which is unnecessary. The management of reference counting for shared
>   memory generally does not need to be released through the release
>   operation of files that have VMA references. Traversing all the threads
>   within the process and executing exit_files() is sufficient.
> - Fulfill comments and commit log,
>   as suggested by Pedro Falcato and Lorenzo Stoakes.
> - Link to v5: https://lore.kernel.org/all/20260630075604.52533-1-jackzxcui1989@163.com/
> 
> Change in v4:
> - Christian pointed out that the coredump process will traverse file
>   descriptors (fd), so certain fds should not be closed by default.
>   Rework the whole feature, add /proc/<pid>/coredump_pre_exit for user
>   pre-exit resources selection, default is NOT pre-exit anything.
> - Mateusz suggested that walking the fd table and release the file-lock is
>   reasonable. No longer release all the fd(s). Based on user config, only
>   the flock fd(s) and the fd(s) correspondent to file-backed shared memory
>   will be released at most.
> - Link to v4: https://lore.kernel.org/all/20260624145552.70143-1-jackzxcui1989@163.com/
> 
> Change in v3:
> - Add comment and commit-log to explain why do the MMF_DUMP_MAPPED_SHARED
>   mm_flags_test() check, note that memory mapped files keep their own
>   separate references to the files. The case to work around is that early
>   unlocking a flock on a file allows other processes to lock and modify
>   the mapped data protected by the flock,
>   as suggested by Pedro Falcato.
> - Link to v3: https://lore.kernel.org/all/20260619122419.3954581-1-jackzxcui1989@163.com/
> 
> Change in v2:
> - Get rid of the implement of adding new fcntl API, the issue does not
>   worth inflicting the cost on everyone,
>   as suggested by Al Viro.
> - Call exit_files() in coredump_wait(),
>   as suggested by Eric W. Biederman.
>   Add MMF_DUMP_MAPPED_SHARED mm_flags_test() check to filter cases that
>   need to dump file-backed shared memory.
> - Link to v2: https://lore.kernel.org/lkml/20260618150301.3226517-1-jackzxcui1989@163.com/
> 
> v1:
> - Link to v1: https://lore.kernel.org/all/20260618030700.2511668-1-jackzxcui1989@163.com/
> ---
>  Documentation/filesystems/proc.rst | 17 ++++++++++++-----
>  fs/coredump.c                      | 21 +++++++++++++++++++++
>  fs/file_table.c                    |  7 ++++++-
>  include/linux/mm_types.h           |  6 ++++--
>  4 files changed, 43 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
> index db6167bef..aee03858b 100644
> --- a/Documentation/filesystems/proc.rst
> +++ b/Documentation/filesystems/proc.rst
> @@ -1927,7 +1927,7 @@ will be dumped when the <pid> process is dumped. coredump_filter is a bitmask
>  of memory types. If a bit of the bitmask is set, memory segments of the
>  corresponding memory type are dumped, otherwise they are not dumped.
>  
> -The following 9 memory types are supported:
> +The following 10 memory types are supported:
>  
>    - (bit 0) anonymous private memory
>    - (bit 1) anonymous shared memory
> @@ -1939,6 +1939,7 @@ The following 9 memory types are supported:
>    - (bit 6) hugetlb shared memory
>    - (bit 7) DAX private memory
>    - (bit 8) DAX shared memory
> +  - (bit 9) fd list
>  
>    Note that MMIO pages such as frame buffer are never dumped and vDSO pages
>    are always dumped regardless of the bitmask status.
> @@ -1946,13 +1947,19 @@ The following 9 memory types are supported:
>    Note that bits 0-4 don't affect hugetlb or DAX memory. hugetlb memory is
>    only affected by bit 5-6, and DAX is only affected by bits 7-8.
>  
> -The default value of coredump_filter is 0x33; this means all anonymous memory
> -segments, ELF header pages and hugetlb private memory are dumped.
> +  Note that bit 9 is set by default because tools like systemd-coredump go
> +  through the fds. If you do not set bit 9, files that are not referenced by
> +  any VMA are released before dumping core. Some file release logic, such as
> +  exiting flock or releasing references to shared buffers is executed much
> +  earlier.
> +
> +The default value of coredump_filter is 0x233; this means all anonymous memory
> +segments, ELF header pages, hugetlb private memory and fd list are dumped.
>  
>  If you don't want to dump all shared memory segments attached to pid 1234,
> -write 0x31 to the process's proc file::
> +write 0x231 to the process's proc file::
>  
> -  $ echo 0x31 > /proc/1234/coredump_filter
> +  $ echo 0x231 > /proc/1234/coredump_filter
>  
>  When a new process is created, the process inherits the bitmask status from its
>  parent. It is useful to set up coredump_filter before the program runs.
> diff --git a/fs/coredump.c b/fs/coredump.c
> index bb6fdb1f4..ed4d30916 100644
> --- a/fs/coredump.c
> +++ b/fs/coredump.c
> @@ -521,6 +521,25 @@ static int zap_threads(struct task_struct *tsk,
>  	return nr;
>  }
>  
> +/*
> + * If do not dump fd list, files that are not referenced by any VMA
> + * can be released before dumping core. Therefore, some file release
> + * logic, such as exiting flock or releasing references to shared
> + * buffers is executed much earlier. Note that do_coredump() often
> + * takes several seconds or even longer to execute.
> + */
> +static void coredump_pre_exit(void)
> +{
> +	struct task_struct *tsk = current, *t;
> +
> +	if (mm_flags_test(MMF_DUMP_FD_LIST, tsk->mm))
> +		return;
> +
> +	for_each_thread(tsk, t) {
> +		exit_files(t);
> +	}
> +}
> +
>  static int coredump_wait(int exit_code, struct core_state *core_state)
>  {
>  	struct task_struct *tsk = current;
> @@ -1124,6 +1143,8 @@ static void do_coredump(struct core_name *cn, struct coredump_params *cprm,
>  	if (cn->mask & COREDUMP_REJECT)
>  		return;
>  
> +	coredump_pre_exit();
> +
>  	/* get us an unshared descriptor table; almost always a no-op */
>  	/* The cell spufs coredump code reads the file descriptor tables */
>  	if (unshare_files())
> diff --git a/fs/file_table.c b/fs/file_table.c
> index 16e52e7fc..6ed8ace8c 100644
> --- a/fs/file_table.c
> +++ b/fs/file_table.c
> @@ -566,7 +566,12 @@ static void __fput_deferred(struct file *file)
>  		return;
>  	}
>  
> -	if (likely(!in_interrupt() && !(task->flags & PF_KTHREAD))) {
> +	/*
> +	 * coredump_pre_exit() may release files before dumping core.
> +	 * Cannot use task_work in the case, needs to release files
> +	 * earlier.
> +	 */
> +	if (likely(!in_interrupt() && !(task->flags & (PF_KTHREAD | PF_DUMPCORE)))) {

Still NAK to this whole appraoch.

  parent reply	other threads:[~2026-08-11  9:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-08  5:27 Xin Zhao
2026-08-08  5:55 ` Randy Dunlap
2026-08-11  9:09 ` Christian Brauner [this message]
2026-08-11  9:22   ` Xin Zhao
2026-08-11 16:22   ` Mateusz Guzik
2026-08-25 12:31     ` Christian Brauner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260811-zerfallen-boiler-bissfest-cdb998278337@brauner \
    --to=brauner@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=alex.aring@gmail.com \
    --cc=allen.lkml@gmail.com \
    --cc=arnd@arndb.de \
    --cc=chuck.lever@oracle.com \
    --cc=corbet@lwn.net \
    --cc=david@kernel.org \
    --cc=ebiederm@xmission.com \
    --cc=j.granados@samsung.com \
    --cc=jack@suse.cz \
    --cc=jackzxcui1989@163.com \
    --cc=jlayton@kernel.org \
    --cc=juri.lelli@redhat.com \
    --cc=keescook@chromium.org \
    --cc=kuba@kernel.org \
    --cc=liam@infradead.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ljs@kernel.org \
    --cc=mcgrof@kernel.org \
    --cc=mhocko@suse.com \
    --cc=mingo@redhat.com \
    --cc=mjguzik@gmail.com \
    --cc=peterz@infradead.org \
    --cc=pfalcato@suse.de \
    --cc=rdunlap@infradead.org \
    --cc=rppt@kernel.org \
    --cc=skhan@linuxfoundation.org \
    --cc=surenb@google.com \
    --cc=vbabka@kernel.org \
    --cc=vincent.guittot@linaro.org \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®