mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Anastasios Papagiannis <tasos.papagiannnis@gmail.com>
To: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	akpm@linux-foundation.org, david@kernel.org, ast@kernel.org,
	daniel@iogearbox.net, andrii@kernel.org, eddyz87@gmail.com,
	memxor@gmail.com, kpsingh@kernel.org, matt@bobrowski.net,
	song@kernel.org, tasos.papagiannnis@gmail.com
Subject: [PATCH bpf-next 2/5] bpf: Add user memory access kfuncs for mm_struct
Date: Tue, 11 Aug 2026 14:21:51 +0300	[thread overview]
Message-ID: <20260811112154.94053-3-tasos.papagiannnis@gmail.com> (raw)
In-Reply-To: <20260811112154.94053-1-tasos.papagiannnis@gmail.com>

When security_bprm_check runs, the arg and env strings for the exec have
been copied into bprm->mm. The new address space has not been associated
yet with a task_struct until exec_mmap(), so existing BPF user memory
helpers can only read from the calling task's old address space.

Add bpf_copy_from_user_mm() and bpf_copy_from_user_mm_str() kfuncs. Both
take a struct mm_struct pointer directly, allowing callers to access
trusted address spaces that are not associated with a task_struct.

bpf_copy_from_user_mm() has similar semantics to
bpf_copy_from_user_task(). bpf_copy_from_user_mm_str() copies one
NUL-terminated string and returns its size including the NUL terminator.
It accepts BPF_F_PAD_ZEROS to clear unused destination bytes on success.

Register both kfuncs with the common BPF_EVENTS kfunc set and mark them
KF_SLEEPABLE because accessing the remote address space can fault. The next
patch marks linux_binprm->mm as trusted-or-null, allowing BPF LSM programs
attached to security_bprm_check to read arguments beginning at bprm->p
after a NULL check and reject an exec based on its command-line arguments.

Signed-off-by: Anastasios Papagiannis <tasos.papagiannnis@gmail.com>
---
 kernel/bpf/helpers.c     |  2 +
 kernel/trace/bpf_trace.c | 83 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 85 insertions(+)

diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index 6388b6b23e49..9ba3362832cd 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -4931,6 +4931,8 @@ BTF_ID_FLAGS(func, bpf_iter_kmem_cache_destroy, KF_ITER_DESTROY | KF_SLEEPABLE)
 BTF_ID_FLAGS(func, bpf_local_irq_save)
 BTF_ID_FLAGS(func, bpf_local_irq_restore)
 #ifdef CONFIG_BPF_EVENTS
+BTF_ID_FLAGS(func, bpf_copy_from_user_mm, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_copy_from_user_mm_str, KF_SLEEPABLE)
 BTF_ID_FLAGS(func, bpf_probe_read_user_dynptr)
 BTF_ID_FLAGS(func, bpf_probe_read_kernel_dynptr)
 BTF_ID_FLAGS(func, bpf_probe_read_user_str_dynptr)
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 891897f8a1b3..8931b3b2fc9d 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -24,6 +24,7 @@
 #include <linux/key.h>
 #include <linux/namei.h>
 #include <linux/file.h>
+#include <linux/mm.h>
 
 #include <net/bpf_sk_storage.h>
 
@@ -3619,6 +3620,88 @@ __bpf_kfunc int bpf_send_signal_task(struct task_struct *task, int sig, enum pid
 	return bpf_send_signal_common(sig, type, task, value);
 }
 
+/**
+ * bpf_copy_from_user_mm() - Copy data from an address space
+ * @dst:             Destination address, in kernel space
+ * @dst__sz:         Number of bytes to copy
+ * @unsafe_ptr__ign: Source address in the address space
+ * @mm:              Address space to copy from
+ * @flags:           Reserved for future use; must be zero
+ *
+ * Copies data from the user address space associated with @mm. The destination
+ * is zeroed if the requested number of bytes cannot be copied in full.
+ *
+ * Return: 0 on success, -EINVAL if @flags is non-zero, or -EFAULT if the copy
+ * fails or is partial.
+ */
+__bpf_kfunc int bpf_copy_from_user_mm(void *dst, u32 dst__sz,
+				      const void __user *unsafe_ptr__ign,
+				      struct mm_struct *mm, u64 flags)
+{
+	int ret;
+
+	if (unlikely(flags))
+		return -EINVAL;
+
+	if (unlikely(!dst__sz))
+		return 0;
+
+	ret = access_remote_vm(mm, (unsigned long)unsafe_ptr__ign,
+			       dst, dst__sz, 0);
+	if (ret == dst__sz)
+		return 0;
+
+	memset(dst, 0, dst__sz);
+	return ret < 0 ? ret : -EFAULT;
+}
+
+/**
+ * bpf_copy_from_user_mm_str() - Copy a string from an address space
+ * @dst:             Destination address, in kernel space. This buffer must be
+ *                   at least @dst__sz bytes long
+ * @dst__sz:         Maximum number of bytes to copy, including the trailing NUL
+ * @unsafe_ptr__ign: Source address in the address space
+ * @mm:              Address space to copy from
+ * @flags:           The only supported flag is BPF_F_PAD_ZEROS
+ *
+ * Copies a NUL-terminated string from the user address space associated with
+ * @mm. If the string is too long, @dst is still NUL-terminated unless @dst__sz
+ * is zero.
+ *
+ * If BPF_F_PAD_ZEROS is set, the unused portion of @dst is cleared on success
+ * and all of @dst is cleared on failure.
+ *
+ * Return: The number of copied bytes including the NUL terminator on success,
+ * or a negative error code on failure.
+ */
+__bpf_kfunc int bpf_copy_from_user_mm_str(void *dst, u32 dst__sz,
+					  const void __user *unsafe_ptr__ign,
+					  struct mm_struct *mm, u64 flags)
+{
+	int ret;
+
+	if (unlikely(flags & ~BPF_F_PAD_ZEROS))
+		return -EINVAL;
+
+	if (unlikely(!dst__sz))
+		return 0;
+
+	ret = copy_remote_mm_str(mm, (unsigned long)unsafe_ptr__ign,
+				 dst, dst__sz, 0);
+	if (ret < 0)
+		goto err;
+
+	if (flags & BPF_F_PAD_ZEROS)
+		memset(dst + ret, 0, dst__sz - ret);
+
+	return ret + 1;
+
+err:
+	if (flags & BPF_F_PAD_ZEROS)
+		memset(dst, 0, dst__sz);
+	return ret;
+}
+
 __bpf_kfunc int bpf_probe_read_user_dynptr(const struct bpf_dynptr *dptr, u64 off,
 					   u64 size, const void __user *unsafe_ptr__ign)
 {
-- 
2.55.0


  parent reply	other threads:[~2026-08-11 11:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-11 11:21 [PATCH bpf-next 0/5] " Anastasios Papagiannis
2026-08-11 11:21 ` [PATCH bpf-next 1/5] mm: Add copy_remote_mm_str() Anastasios Papagiannis
2026-08-11 12:40   ` bot+bpf-ci
2026-08-11 11:21 ` Anastasios Papagiannis [this message]
2026-08-11 12:40   ` [PATCH bpf-next 2/5] bpf: Add user memory access kfuncs for mm_struct bot+bpf-ci
2026-08-11 11:21 ` [PATCH bpf-next 3/5] bpf: Mark linux_binprm->mm as trusted-or-null Anastasios Papagiannis
2026-08-11 12:40   ` bot+bpf-ci
2026-08-11 11:21 ` [PATCH bpf-next 4/5] selftests/bpf: Test trusted-or-null linux_binprm->mm Anastasios Papagiannis
2026-08-11 11:21 ` [PATCH bpf-next 5/5] selftests/bpf: Test mm_struct user memory kfuncs with linux_binprm Anastasios Papagiannis
2026-08-11 13:28 ` [PATCH bpf-next 0/5] bpf: Add user memory access kfuncs for mm_struct Anastasios Papagiannis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260811112154.94053-3-tasos.papagiannnis@gmail.com \
    --to=tasos.papagiannnis@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=david@kernel.org \
    --cc=eddyz87@gmail.com \
    --cc=kpsingh@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=matt@bobrowski.net \
    --cc=memxor@gmail.com \
    --cc=song@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®