mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Qi Zhang <marsy12010123@gmail.com>
To: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com
Cc: horms@kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	nicoyip.dev@gmail.com, Qi Zhang <marsy12010123@gmail.com>
Subject: [PATCH net v2] net: pktgen: use a consistent flow count
Date: Wed, 12 Aug 2026 13:21:30 +0800	[thread overview]
Message-ID: <20260812052130.32823-1-marsy12010123@gmail.com> (raw)

pktgen_if_write() can update cflows while the packet generator thread is
inside mod_cur_headers(). The latter first tests cflows, but f_pick() then
reloads it when selecting a random flow.

This allows the following interleaving:

  CPU 0 (kpktgend)                 CPU 1 (proc write)
  if (pkt_dev->cflows) // 10
                                   pkt_dev->cflows = 0
  get_random_u32_below(pkt_dev->cflows)

get_random_u32_below(0) returns a full-width random value. Using that
value as an index into the fixed-size flows array causes an out-of-bounds
access. The kernel reported:

  BUG: unable to handle page fault for address: ffffc8fe2d2674bc
  #PF: supervisor read access in kernel mode
  Oops: Oops: 0000 [#1] SMP KASAN NOPTI
  CPU: 0 UID: 0 PID: 65 Comm: kpktgend_0
  RIP: 0010:mod_cur_headers+0x16f8/0x2840
  Call Trace:
   <TASK>
   pktgen_thread_worker+0x305a/0x6bc0
   kthread+0x2c6/0x3b0
   ret_from_fork+0x36e/0x5a0
   ret_from_fork_asm+0x1a/0x30
   </TASK>

Read cflows once at the start of mod_cur_headers(), pass the snapshot to
f_pick(), and use it for later flow-state decisions in the same packet.
Publish proc updates with WRITE_ONCE(). Flow selection then always uses a
nonzero count bounded by MAX_CFLOWS, while a concurrent update takes
effect on a later packet.

Fixes: 007a531b0a0c ("[PKTGEN]: Introduce sequential flows")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Qi Zhang <marsy12010123@gmail.com>
---
v2:
  - Use the written value when reporting the new flow count.
  - Add READ_ONCE() to the remaining lockless cflows reads, including
    pktgen_if_show(), as suggested by Paolo Abeni.
v1: https://lore.kernel.org/r/20260802152309.821584-1-marsy12010123@gmail.com

 net/core/pktgen.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index ee64f3012..e14bb9a48 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -566,6 +566,7 @@ static const struct proc_ops pktgen_proc_ops = {
 static int pktgen_if_show(struct seq_file *seq, void *v)
 {
 	const struct pktgen_dev *pkt_dev = seq->private;
+	unsigned int cflows = READ_ONCE(pkt_dev->cflows);
 	ktime_t stopped;
 	unsigned int i;
 	u64 idle;
@@ -590,7 +591,7 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
 		   pkt_dev->nfrags, (unsigned long long) pkt_dev->delay,
 		   pkt_dev->clone_skb, pkt_dev->odevname);
 
-	seq_printf(seq, "     flows: %u flowlen: %u\n", pkt_dev->cflows,
+	seq_printf(seq, "     flows: %u flowlen: %u\n", cflows,
 		   pkt_dev->lflow);
 
 	seq_printf(seq,
@@ -675,7 +676,7 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
 
 	for (i = 0; i < NR_PKT_FLAGS; i++) {
 		if (i == FLOW_SEQ_SHIFT)
-			if (!pkt_dev->cflows)
+			if (!cflows)
 				continue;
 
 		if (pkt_dev->flags & (1 << i)) {
@@ -1632,8 +1633,8 @@ static ssize_t pktgen_if_write(struct file *file,
 		if (value > MAX_CFLOWS)
 			value = MAX_CFLOWS;
 
-		pkt_dev->cflows = value;
-		sprintf(pg_result, "OK: flows=%u", pkt_dev->cflows);
+		WRITE_ONCE(pkt_dev->cflows, value);
+		sprintf(pg_result, "OK: flows=%u", (unsigned int)value);
 		return count;
 	}
 #ifdef CONFIG_XFRM
@@ -2373,7 +2374,7 @@ static inline int f_seen(const struct pktgen_dev *pkt_dev, int flow)
 	return !!(pkt_dev->flows[flow].flags & F_INIT);
 }
 
-static inline int f_pick(struct pktgen_dev *pkt_dev)
+static inline int f_pick(struct pktgen_dev *pkt_dev, unsigned int cflows)
 {
 	int flow = pkt_dev->curfl;
 
@@ -2383,11 +2384,11 @@ static inline int f_pick(struct pktgen_dev *pkt_dev)
 			pkt_dev->flows[flow].count = 0;
 			pkt_dev->flows[flow].flags = 0;
 			pkt_dev->curfl += 1;
-			if (pkt_dev->curfl >= pkt_dev->cflows)
+			if (pkt_dev->curfl >= cflows)
 				pkt_dev->curfl = 0; /*reset */
 		}
 	} else {
-		flow = get_random_u32_below(pkt_dev->cflows);
+		flow = get_random_u32_below(cflows);
 		pkt_dev->curfl = flow;
 
 		if (pkt_dev->flows[flow].count > pkt_dev->lflow) {
@@ -2461,12 +2462,14 @@ static void set_cur_queue_map(struct pktgen_dev *pkt_dev)
  */
 static void mod_cur_headers(struct pktgen_dev *pkt_dev)
 {
+	unsigned int cflows;
 	__u32 imn;
 	__u32 imx;
 	int flow = 0;
 
-	if (pkt_dev->cflows)
-		flow = f_pick(pkt_dev);
+	cflows = READ_ONCE(pkt_dev->cflows);
+	if (cflows)
+		flow = f_pick(pkt_dev, cflows);
 
 	/*  Deal with source MAC */
 	if (pkt_dev->src_mac_count > 1) {
@@ -2582,7 +2585,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev)
 			pkt_dev->cur_saddr = htonl(t);
 		}
 
-		if (pkt_dev->cflows && f_seen(pkt_dev, flow)) {
+		if (cflows && f_seen(pkt_dev, flow)) {
 			pkt_dev->cur_daddr = pkt_dev->flows[flow].cur_daddr;
 		} else {
 			imn = ntohl(pkt_dev->daddr_min);
@@ -2611,7 +2614,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev)
 					pkt_dev->cur_daddr = htonl(t);
 				}
 			}
-			if (pkt_dev->cflows) {
+			if (cflows) {
 				pkt_dev->flows[flow].flags |= F_INIT;
 				pkt_dev->flows[flow].cur_daddr =
 				    pkt_dev->cur_daddr;
-- 
2.25.1


             reply	other threads:[~2026-08-12  5:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-12  5:21 Qi Zhang [this message]
2026-08-14  9:07 ` Simon Horman
2026-08-17 20:00 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260812052130.32823-1-marsy12010123@gmail.com \
    --to=marsy12010123@gmail.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicoyip.dev@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®