From: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Vishnu Saini <vishnu.saini@oss.qualcomm.com>,
venkata.valluru@oss.qualcomm.com,
Jessica Zhang <jesszhan0024@gmail.com>
Subject: [PATCH v2 0/3] arm64: dts: qcom: Add LVDS display overlays for lemans, monaco and rb3gen2
Date: Thu, 13 Aug 2026 23:03:19 +0530 [thread overview]
Message-ID: <20260813-lvds-support-v2-0-6b11035e8ab0@oss.qualcomm.com> (raw)
This series adds LVDS display support via device tree overlays for three
Qualcomm platforms: SA8775P Lemans EVK, SA8295P/QCS8300 Monaco EVK, and
QCS6490 RB3 Gen2 industrial mezzanine.
All three platforms use the Lontium LT9211C DSI-to-LVDS bridge chip, which
converts DSI output to dual-channel LVDS for driving 1920x1080 panels.
The overlays follow the established composite-DTB pattern already in use
on these platforms (IFP mezzanine, camera, el2) and are structured to be
applied on top of the existing IFP mezzanine overlay.
Each overlay:
- Wires the LT9211C bridge to the DSI output via an I2C node
- Defines a generic dual-channel panel-lvds node with VESA-24 mapping
targeting a 1920x1080 (476x268mm) panel at 148.5 MHz pixel clock
- Provides an LCD bias regulator through the GPIO expander
This series depends on:
[PATCH v6 0/2] This series adds LT9211C bridge driver by extending LT9211
https://lore.kernel.org/all/20260719-add-lt9211c-bridge-v6-0-e56d22152586@oss.qualcomm.com/
which adds lontium,lt9211c compatible support to the lontium-lt9211 driver
and extends the binding YAML accordingly, and:
[PATCH v2 0/2] This series adds BOE DV215FHM-R01 LVDS panel support
https://lore.kernel.org/all/20260810-b4-lvds-panel-doc-v2-0-f2c2fe309989@oss.qualcomm.com/
which documents the boe,dv215fhm-r01 panel and add timings used by these overlays.
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
---
Changes in v2:
- Updated overlays to make them compatable with panel-simple-lvds-dual-ports.yaml [Rob (in panel series)]
- Added Empty lines before the status property [Dmitry]
- Link to v1: https://lore.kernel.org/r/20260719-lvds-support-v1-0-1f1aca3213ba@oss.qualcomm.com
---
Vishnu Saini (3):
arm64: dts: qcom: lemans-evk: Add LVDS display overlay
arm64: dts: qcom: monaco-evk: Add LVDS display overlay
arm64: dts: qcom: qcs6490-rb3gen2: Add LVDS display overlay
arch/arm64/boot/dts/qcom/Makefile | 14 +++
.../dts/qcom/lemans-evk-lvds-boe,dv215fhm-r01.dtso | 116 ++++++++++++++++++++
.../dts/qcom/monaco-evk-lvds-boe,dv215fhm-r01.dtso | 117 +++++++++++++++++++++
...industrial-mezzanine-lvds-boe,dv215fhm-r01.dtso | 105 ++++++++++++++++++
4 files changed, 352 insertions(+)
---
base-commit: f86573e68e56a7df7d54eb58101ac413ba731996
change-id: 20260708-lvds-support-2d40d60654f1
prerequisite-message-id: <20260719-add-lt9211c-bridge-v6-0-e56d22152586@oss.qualcomm.com>
prerequisite-patch-id: dbba64d1ace696df388c5df3d1cb05a0701df194
prerequisite-patch-id: 7729b9c67a7c274b25fea08635dfede3fc604ae9
prerequisite-message-id: <20260810-b4-lvds-panel-doc-v2-0-f2c2fe309989@oss.qualcomm.com>
prerequisite-patch-id: bd3612ce053552e2ae7401a1217c4884413563f4
prerequisite-patch-id: 1d3e40bbefcb2550afd81c5cced812a1d3b943a2
Best regards,
--
Vishnu Saini <vishnu.saini@oss.qualcomm.com>
next reply other threads:[~2026-08-13 17:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 17:33 Vishnu Saini [this message]
2026-08-13 17:33 ` [PATCH v2 1/3] arm64: dts: qcom: lemans-evk: Add LVDS display overlay Vishnu Saini
2026-09-03 13:06 ` Konrad Dybcio
2026-09-04 19:37 ` Vishnu Saini
2026-08-13 17:33 ` [PATCH v2 2/3] arm64: dts: qcom: monaco-evk: " Vishnu Saini
2026-09-03 13:06 ` Konrad Dybcio
2026-08-13 17:33 ` [PATCH v2 3/3] arm64: dts: qcom: qcs6490-rb3gen2: " Vishnu Saini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813-lvds-support-v2-0-6b11035e8ab0@oss.qualcomm.com \
--to=vishnu.saini@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jesszhan0024@gmail.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=venkata.valluru@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®