From: Krzysztof Kozlowski <krzk@kernel.org>
To: Aaron Kling <webgeek1234@gmail.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 4/4] arm64: dts: qcom: Add Retroid Pocket Nova
Date: Thu, 13 Aug 2026 11:24:00 +0200 [thread overview]
Message-ID: <20260813-private-brass-rhino-81d7a9@quoll> (raw)
In-Reply-To: <20260808-rp-qcs8550-v1-4-a5a365ba3dc5@gmail.com>
On Sat, Aug 08, 2026 at 12:37:58PM -0500, Aaron Kling wrote:
> The Retroid Pocket Nova is a high-performance Android-based handheld
> gaming console powered by the Qualcomm Snapdragon 8 Gen 2 processor
> featuring a 4.5-inch 4:3 AMOLED touchscreen.
>
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/qcs8550-retroidpocket-nova.dts | 118 +++++++++++++++++++++
> 2 files changed, 119 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 09b3c5b2d9dab..582805e89f4cb 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -196,6 +196,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2mini.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2portal.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-thor.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-retroidpocket-nova.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs8550-retroidpocket-rp6.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs8550-rb5gen2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-retroidpocket-nova.dts b/arch/arm64/boot/dts/qcom/qcs8550-retroidpocket-nova.dts
> new file mode 100644
> index 0000000000000..10dabb1d51f5a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs8550-retroidpocket-nova.dts
> @@ -0,0 +1,118 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include "qcs8550-ayntec-common.dtsi"
> +
> +&{/} {
> + model = "Retroid Pocket Nova";
> + compatible = "retroidpocket,nova", "qcom,qcs8550", "qcom,sm8550";
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pmk8550_pwm 0 860000>;
> + brightness-levels = <1023 0>;
> + num-interpolated-steps = <1023>;
> + default-brightness-level = <600>;
> + power-supply = <&vph_pwr>;
> + enable-gpios = <&pmk8550_gpios 5 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm_backlight_default>;
> +
> + status = "okay";
> + };
> +
> + vdd_disp_1v8: vdd-disp-1v8-regulator {
So foo-regulator?
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_disp_1v8";
> +
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + vdd_disp_2v8: vdd-disp-2v8-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_disp_2v8";
> +
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> +
> + gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + ts_avdd_3v0: regulator-ts-avdd-3v0 {
Or regulator-foo?
Decide and also read:
https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
Best regards,
Krzysztof
next prev parent reply other threads:[~2026-08-13 9:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-08 17:37 [PATCH 0/4] arm64: dts: qcom: Support Retroid Pocket QCS8550 Devices Aaron Kling via B4 Relay
2026-08-08 17:37 ` [PATCH 1/4] dt-bindings: vendor-prefixes: Add Retroid Pocket Aaron Kling via B4 Relay
2026-08-13 9:20 ` Krzysztof Kozlowski
2026-08-08 17:37 ` [PATCH 2/4] dt-bindings: arm: qcom: Add Retroid Pocket QCS8550 Devices Aaron Kling via B4 Relay
2026-08-13 9:23 ` Krzysztof Kozlowski
2026-08-14 18:40 ` Aaron Kling
2026-08-08 17:37 ` [PATCH 3/4] arm64: dts: qcom: Add Retroid Pocket 6 Aaron Kling via B4 Relay
2026-08-13 19:05 ` Dmitry Baryshkov
2026-08-14 18:59 ` Aaron Kling
2026-08-15 14:44 ` Dmitry Baryshkov
2026-08-17 16:11 ` Konrad Dybcio
2026-08-08 17:37 ` [PATCH 4/4] arm64: dts: qcom: Add Retroid Pocket Nova Aaron Kling via B4 Relay
2026-08-13 9:24 ` Krzysztof Kozlowski [this message]
2026-08-14 19:03 ` Aaron Kling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813-private-brass-rhino-81d7a9@quoll \
--to=krzk@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=webgeek1234@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®