From: Bhargav Joshi <j.bhargav.u@gmail.com>
To: Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Andrei Simion <andrei.simion@microchip.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Peter Rosin <peda@lysator.liu.se>
Cc: linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, goledhruva@gmail.com,
m-chawdhry@ti.com, daniel.baluta@gmail.com,
simona.toaca@nxp.com, j.bhargav.u@gmail.com
Subject: [PATCH] ASoC: dt-bindings: tse850: Convert to DT schema
Date: Thu, 13 Aug 2026 05:03:54 +0530 [thread overview]
Message-ID: <20260813-ti-axtensia-v1-1-768a1089fd5f@gmail.com> (raw)
Convert Axentia TSE-850 audio complex from text to DT schema. No
funcational changes.
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
.../bindings/sound/axentia,tse850-pcm5142.txt | 92 ------------------
.../bindings/sound/axentia,tse850-pcm5142.yaml | 104 +++++++++++++++++++++
2 files changed, 104 insertions(+), 92 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
deleted file mode 100644
index b6cc5f6f78c2..000000000000
--- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Devicetree bindings for the Axentia TSE-850 audio complex
-
-Required properties:
- - compatible: "axentia,tse850-pcm5142"
- - axentia,cpu-dai: The phandle of the cpu dai.
- - axentia,audio-codec: The phandle of the PCM5142 codec.
- - axentia,add-gpios: gpio specifier that controls the mixer.
- - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1.
- - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2.
- - axentia,ana-supply: Regulator that supplies the output amplifier. Must
- support voltages in the 2V - 20V range, in 1V steps.
-
-The schematics explaining the gpios are as follows:
-
- loop1 relays
- IN1 +---o +------------+ o---+ OUT1
- \ /
- + +
- | / |
- +--o +--. |
- | add | |
- | V |
- | .---. |
- DAC +----------->|Sum|---+
- | '---' |
- | |
- + +
-
- IN2 +---o--+------------+--o---+ OUT2
- loop2 relays
-
-The 'loop1' gpio pin controls two relays, which are either in loop position,
-meaning that input and output are directly connected, or they are in mixer
-position, meaning that the signal is passed through the 'Sum' mixer. Similarly
-for 'loop2'.
-
-In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer
-(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays
-are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2
-are TSE-850 connectors and DAC is the PCB name of the (filtered) output from
-the PCM5142 codec.
-
-Example:
-
- &ssc0 {
- #sound-dai-cells = <0>;
-
- };
-
- &i2c {
- codec: pcm5142@4c {
- compatible = "ti,pcm5142";
-
- reg = <0x4c>;
-
- AVDD-supply = <®_3v3>;
- DVDD-supply = <®_3v3>;
- CPVDD-supply = <®_3v3>;
-
- clocks = <&sck>;
-
- pll-in = <3>;
- pll-out = <6>;
- };
- };
-
- ana: ana-reg {
- compatible = "pwm-regulator";
-
- regulator-name = "ANA";
-
- pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
- pwm-dutycycle-unit = <1000>;
- pwm-dutycycle-range = <100 1000>;
-
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <20000000>;
- regulator-ramp-delay = <1000>;
- };
-
- sound {
- compatible = "axentia,tse850-pcm5142";
-
- axentia,cpu-dai = <&ssc0>;
- axentia,audio-codec = <&codec>;
-
- axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
- axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
- axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
-
- axentia,ana-supply = <&ana>;
- };
diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.yaml b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.yaml
new file mode 100644
index 000000000000..0ab4b697d28e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/axentia,tse850-pcm5142.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axentia TSE-850 audio complex
+
+maintainers:
+ - Peter Rosin <peda@axentia.se>
+
+description: |
+ The TSE-850 is an FM Transmitter Station Equipment, designed to generate
+ baseband signals for FM, mainly the DARC subcarrier, but other signals
+ are also possible.
+
+ The schematics explaining the gpios are as follows::
+
+ loop1 relays
+ IN1 +---o +------------+ o---+ OUT1
+ \ /
+ + +
+ | / |
+ +--o +--. |
+ | add | |
+ | V |
+ | .---. |
+ DAC +----------->|Sum|---+
+ | '---' |
+ | |
+ + +
+ IN2 +---o--+------------+--o---+ OUT2
+ loop2 relays
+
+ The 'loop1' gpio pin controls two relays, which are either in loop
+ position, meaning that input and output are directly connected, or
+ they are in mixer position, meaning that the signal is passed through
+ the 'Sum' mixer. Similarly for 'loop2'.
+
+ In the above, the 'loop1' relays are inactive, thus feeding IN1 to the
+ mixer (if 'add' is active) and feeding the mixer output to OUT1. The
+ 'loop2' relays are active, short-cutting the TSE-850 from channel 2.
+ IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name
+ of the (filtered) output from the PCM5142 codec.
+
+properties:
+ compatible:
+ const: axentia,tse850-pcm5142
+
+ axentia,cpu-dai:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle of the cpu dai.
+
+ axentia,audio-codec:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle of the PCM5142 codec.
+
+ axentia,add-gpios:
+ maxItems: 1
+ description:
+ gpio specifier that controls the mixer.
+
+ axentia,loop1-gpios:
+ maxItems: 1
+ description:
+ gpio specifier that controls loop relays on channel 1.
+
+ axentia,loop2-gpios:
+ maxItems: 1
+ description:
+ gpio specifier that controls loop relays on channel 2.
+
+ axentia,ana-supply:
+ description:
+ Regulator that supplies the output amplifier. Must support voltages in
+ the 2V - 20V range, in 1V steps.
+
+required:
+ - compatible
+ - axentia,cpu-dai
+ - axentia,audio-codec
+ - axentia,add-gpios
+ - axentia,loop1-gpios
+ - axentia,loop2-gpios
+ - axentia,ana-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pwm/pwm.h>
+
+ sound {
+ compatible = "axentia,tse850-pcm5142";
+ axentia,cpu-dai = <&ssc0>;
+ axentia,audio-codec = <&codec>;
+ axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+ axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+ axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+ axentia,ana-supply = <®ulator_ana>;
+ };
---
base-commit: 3d6d817622b0a9721e3cc404df3469171582be13
change-id: 20260813-ti-axtensia-59c88b5f0f17
Best regards,
--
Bhargav
next reply other threads:[~2026-08-12 23:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-12 23:33 Bhargav Joshi [this message]
2026-08-13 10:51 ` Peter Rosin
2026-08-14 20:18 ` Rob Herring
2026-09-10 14:12 ` Peter Rosin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813-ti-axtensia-v1-1-768a1089fd5f@gmail.com \
--to=j.bhargav.u@gmail.com \
--cc=andrei.simion@microchip.com \
--cc=broonie@kernel.org \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=daniel.baluta@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=goledhruva@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=m-chawdhry@ti.com \
--cc=peda@lysator.liu.se \
--cc=robh@kernel.org \
--cc=simona.toaca@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®