mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Aaron Kling via B4 Relay <devnull+webgeek1234.gmail.com@kernel.org>
To: Neil Armstrong <neil.armstrong@linaro.org>,
	 Jessica Zhang <jesszhan0024@gmail.com>,
	 Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	 Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	 David Airlie <airlied@gmail.com>,
	Simona Vetter <simona@ffwll.ch>,  Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	Aaron Kling <webgeek1234@gmail.com>
Subject: [PATCH 4/4] drm/panel: visionox-vtdr6130: Add Retroid Pocket 6 panel
Date: Fri, 14 Aug 2026 13:17:18 -0500	[thread overview]
Message-ID: <20260814-rp6-panel-v1-4-111c1aeccf0f@gmail.com> (raw)
In-Reply-To: <20260814-rp6-panel-v1-0-111c1aeccf0f@gmail.com>

From: Aaron Kling <webgeek1234@gmail.com>

Add support for the 1080x1920 panel used in the Retroid Pocket 6.

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 drivers/gpu/drm/panel/panel-visionox-vtdr6130.c | 114 ++++++++++++++++++++++++
 1 file changed, 114 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
index 805c9846c2a0b..5c826f95ec478 100644
--- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
+++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
@@ -64,6 +64,82 @@ static void visionox_vtdr6130_reset(struct visionox_vtdr6130 *ctx)
 	usleep_range(10000, 11000);
 }
 
+static int retroidpocket_rp6_on(struct visionox_vtdr6130 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+	struct drm_dsc_picture_parameter_set pps;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x03, 0x01);
+	mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx,
+				     MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
+	mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0xff07);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6f, 0x02);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x02);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x59, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6c, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6d, 0x00);
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x70, 0x11, 0x00, 0x00, 0x89,
+				     0x30, 0x80, 0x07, 0x80, 0x04, 0x38, 0x00,
+				     0x14, 0x02, 0x1c, 0x02, 0x1c, 0x02, 0x00,
+				     0x02, 0x25, 0x00, 0x20, 0x01, 0xd5, 0x00,
+				     0x07, 0x00, 0x0d, 0x05, 0x7a, 0x05, 0x16,
+				     0x18, 0x00, 0x10, 0xf0, 0x03, 0x0c, 0x20,
+				     0x00, 0x06, 0x0b, 0x0b, 0x33, 0x0e, 0x1c,
+				     0x2a, 0x38, 0x46, 0x54, 0x62, 0x69, 0x70,
+				     0x77, 0x79, 0x7b, 0x7d, 0x7e, 0x01, 0x02,
+				     0x01, 0x00, 0x09, 0x40, 0x09, 0xbe, 0x19,
+				     0xfc, 0x19, 0xfa, 0x19, 0xf8, 0x1a, 0x38,
+				     0x1a, 0x78, 0x1a, 0xb6, 0x2a, 0xb6, 0x2a,
+				     0xf4, 0x2a, 0xf4, 0x4b, 0x34, 0x63, 0x74,
+				     0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xaa, 0x10);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb1, 0x02, 0x15, 0x00, 0x14,
+				     0x00, 0x20, 0x00, 0x02, 0x16, 0x00, 0x14,
+				     0x07, 0xb4, 0x00, 0x02, 0x16, 0x00, 0x14,
+				     0x00, 0x10, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xaa, 0x14);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb2, 0x03, 0x33);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb4, 0x0a, 0x72, 0x00, 0x00,
+				     0x0a, 0x72, 0x00, 0x00, 0x0a, 0x72, 0x00,
+				     0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb5, 0x00, 0x1e, 0x1e, 0x1e,
+				     0x1e, 0x1e, 0x1e, 0x06, 0x01);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb9, 0x00, 0x00, 0x08, 0x1e,
+				     0x1e, 0x1e);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbc, 0x10, 0x00, 0x00, 0x08,
+				     0x11, 0x1e, 0x7c, 0x1e, 0x7c, 0x1e, 0x7c);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbe, 0x10, 0x10, 0x00, 0x0c,
+				     0x22, 0x1e, 0x62, 0x1e, 0x62, 0x1e, 0x62);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xff, 0x5a, 0x80);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x65, 0x13);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfd, 0x01);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xff, 0x5a, 0x81);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf9, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xff, 0x5a, 0x83);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x65, 0x04);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf8, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xaa, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xff, 0x5a, 0x00);
+
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 150);
+
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 50);
+
+	drm_dsc_pps_payload_pack(&pps, dsi->dsc);
+	mipi_dsi_picture_parameter_set_multi(&dsi_ctx, &pps);
+	mipi_dsi_compression_mode_multi(&dsi_ctx, true);
+
+	return dsi_ctx.accum_err;
+}
+
 static int visionox_vtdr6130_on(struct visionox_vtdr6130 *ctx)
 {
 	struct mipi_dsi_device *dsi = ctx->dsi;
@@ -204,6 +280,43 @@ static int visionox_vtdr6130_unprepare(struct drm_panel *panel)
 	return 0;
 }
 
+static const struct drm_display_mode retroidpocket_rp6_modes[] = {
+	{
+		.clock = (1080 + 22 + 2 + 16) * (1920 + 16 + 2 + 20) * 120 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 22,
+		.hsync_end = 1080 + 22 + 2,
+		.htotal = 1080 + 22 + 2 + 16,
+		.vdisplay = 1920,
+		.vsync_start = 1920 + 16,
+		.vsync_end = 1920 + 16 + 2,
+		.vtotal = 1920 + 16 + 2 + 20,
+	},
+};
+
+static struct visionox_vtdr6130_desc retroidpocket_rp6_panel_desc = {
+	.modes = retroidpocket_rp6_modes,
+	.num_modes = ARRAY_SIZE(retroidpocket_rp6_modes),
+	.width_mm = 69,
+	.height_mm = 122,
+	.bpc = 8,
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET |
+		      MIPI_DSI_CLOCK_NON_CONTINUOUS,
+	.init_sequence = retroidpocket_rp6_on,
+	.dsc = {
+		.dsc_version_major = 0x1,
+		.dsc_version_minor = 0x1,
+		.slice_height = 12,
+		.slice_width = 540,
+		.slice_count = 2,
+		.bits_per_component = 8,
+		.bits_per_pixel = 8 << 4,
+		.block_pred_enable = true,
+	},
+};
+
 static const struct drm_display_mode visionox_vtdr6130_modes[] = {
 	{
 		.clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
@@ -357,6 +470,7 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
 }
 
 static const struct of_device_id visionox_vtdr6130_of_match[] = {
+	{ .compatible = "retroidpocket,rp6-panel", .data = &retroidpocket_rp6_panel_desc },
 	{ .compatible = "visionox,vtdr6130", .data = &visionox_vtdr6130_panel_desc },
 	{ /* sentinel */ }
 };

-- 
2.54.0



  parent reply	other threads:[~2026-08-14 18:17 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-14 18:17 [PATCH 0/4] drm/panel: Support " Aaron Kling via B4 Relay
2026-08-14 18:17 ` [PATCH 1/4] dt-bindings: display: visionox,vtdr6130: Add " Aaron Kling via B4 Relay
2026-08-20  6:48   ` Krzysztof Kozlowski
2026-08-14 18:17 ` [PATCH 2/4] drm/panel: visionox-vtdr6130: Add panel orientation support Aaron Kling via B4 Relay
2026-08-26  9:58   ` Neil Armstrong
2026-08-14 18:17 ` [PATCH 3/4] drm/panel: visionox-vtdr6130: Modularize panel config Aaron Kling via B4 Relay
2026-08-26  9:53   ` Neil Armstrong
2026-08-26 17:30     ` Aaron Kling
2026-08-14 18:17 ` Aaron Kling via B4 Relay [this message]
2026-08-26  9:54   ` [PATCH 4/4] drm/panel: visionox-vtdr6130: Add Retroid Pocket 6 panel Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260814-rp6-panel-v1-4-111c1aeccf0f@gmail.com \
    --to=devnull+webgeek1234.gmail.com@kernel.org \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jesszhan0024@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    --cc=webgeek1234@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®