Re: [PATCH v3 1/2] iio: adc: ti-ads112c14: add support for I2C CRC8

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 7 Aug 2026 16:18:40 -0500
David Lechner <dlechner@baylibre.com> wrote:

> On 8/6/26 8:08 PM, Andy Shevchenko wrote:
> > On Mon, Jul 27, 2026 at 09:09:50AM -0500, David Lechner (TI) wrote:  
> >> Add support for I2C CRC8 to the TI ADS112C14 ADC driver. This verifies
> >> data integrity of all I2C transactions with the device.
> >>
> >> For now, it is always enabled, but it could be made optional in the
> >> future if needed (e.g. for higher-speed data acquisition).  
> > 
> > ...
> >   
> >> +static int ads112c14_i2c_add_driver(struct i2c_driver *driver)
> >> +{
> >> +	crc8_populate_msb(ads112c14_crc8_table, ADS112C14_I2C_CRC8_POLYNOMIAL);
> >> +
> >> +	return i2c_add_driver(driver);
> >> +}
> >> +
> >>  static struct i2c_driver ads112c14_driver = {
> >>  	.driver = {
> >>  		.name = "ads112c14",
> >> @@ -1217,7 +1347,7 @@ static struct i2c_driver ads112c14_driver = {
> >>  	.probe = ads112c14_probe,
> >>  	.id_table = ads112c14_id,
> >>  };
> >> -module_i2c_driver(ads112c14_driver);
> >> +module_driver(ads112c14_driver, ads112c14_i2c_add_driver, i2c_del_driver);  
> > 
> > This is not needed if you call crc8_populate_msb() from the probe using
> > DO_ONCE_SLEEPABLE().
> >   
> 
> Good idea, but this series got picked up already.
> 
Follow up is fine.  DO_ONCE_SLEEPABLE() is a new one to me, and indeed looks rather
useful for this sort of thing.

Jonathan