mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Kurt Borja <kuurtb@gmail.com>
Cc: "Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Linus Walleij" <linusw@kernel.org>,
	"Bartosz Golaszewski" <brgl@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: Re: [PATCH v3 3/9] iio: adc: ti-ads1262: support per-channel sampling frequency
Date: Sun, 16 Aug 2026 22:34:32 +0100	[thread overview]
Message-ID: <20260816223432.64ddf4d0@jic23-huawei> (raw)
In-Reply-To: <20260807-ads126x-v3-3-f89925d72792@gmail.com>

On Fri, 07 Aug 2026 22:58:25 -0500
Kurt Borja <kuurtb@gmail.com> wrote:

> Add per-channel sampling frequency support. The "available" attribute is
> assigned per-channel too, in order to eventually support per-filter
> availability.
> 
> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Trivial things only.

> ---
>  drivers/iio/adc/ti-ads1262.c | 159 ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 158 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/adc/ti-ads1262.c b/drivers/iio/adc/ti-ads1262.c
> index d78e5e3ae13e..b3b7b1249102 100644
> --- a/drivers/iio/adc/ti-ads1262.c
> +++ b/drivers/iio/adc/ti-ads1262.c
> @@ -26,6 +26,7 @@
>  #include <linux/regulator/consumer.h>
>  #include <linux/spi/spi.h>
>  #include <linux/types.h>
> +#include <linux/units.h>
>  
>  #include <asm/byteorder.h>
>  
> @@ -148,6 +149,7 @@ enum {
>  	ADS1262_DR_14400_SPS,
>  	ADS1262_DR_19200_SPS,
>  	ADS1262_DR_38400_SPS,
> +	ADS1262_DR_COUNT,

For count / terminating entries, no trailing comma as nothing should ever
come after them.

>  };
>  
>  static int ads1262_channel_enable(struct ads1262 *st,
>  				  const struct iio_chan_spec *spec)
>  {
> +	struct ads1262_channel *chan = &st->channels[spec->scan_index];
> +	int ret;
>  	u8 val;
>  
>  	guard(mutex)(&st->xfer_lock);
>  	guard(mutex)(&st->chan_lock);
>  
> +	val = FIELD_PREP(ADS1262_MODE2_DR_MASK, chan->data_rate);
> +	ret = regmap_update_bits(st->regmap, ADS1262_MODE2_REG,
> +				 ADS1262_MODE2_DR_MASK, val);
Not seeing an advantage here over
	ret = regmap_update_bits(st->regmap, ADS1262_MODE2_REG,
				 ADS1262_MODE2_DR_MASK,
				 FIELD_PREP(ADS1262_MODE2_DR_MASK, chan->data_rate));

It is fine to go a little over 80 chars when it helps readability.  Here I think
that is the case as clear we have matching masks.

> +	if (ret)
> +		return ret;
> +
>  	val = FIELD_PREP(ADS1262_INPMUX_MUXN_MASK, spec->channel2) |
>  	      FIELD_PREP(ADS1262_INPMUX_MUXP_MASK, spec->channel);
>  	return regmap_update_bits(st->regmap, ADS1262_INPMUX_REG,

  parent reply	other threads:[~2026-08-16 21:34 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-08  3:58 [PATCH v3 0/9] iio: adc: Add TI ADS126X ADC family support Kurt Borja
2026-08-08  3:58 ` [PATCH v3 1/9] dt-bindings: iio: adc: support the TI ADS126x ADC family Kurt Borja
2026-08-08 18:38   ` David Lechner
2026-08-09  8:26     ` Kurt Borja
2026-08-10 16:42       ` David Lechner
2026-08-11 20:30         ` Kurt Borja
2026-08-10  8:46   ` Bartosz Golaszewski
2026-08-11 21:29     ` Kurt Borja
2026-08-08  3:58 ` [PATCH v3 2/9] iio: adc: add the ti-ads1262 driver Kurt Borja
2026-08-08 18:39   ` David Lechner
2026-08-09  8:26     ` Kurt Borja
2026-08-10 16:42       ` David Lechner
2026-08-11 20:28         ` Kurt Borja
2026-08-12 13:40           ` David Lechner
2026-08-10 18:48       ` Andy Shevchenko
2026-08-11 20:31         ` Kurt Borja
2026-08-08 22:28   ` Uwe Kleine-König
2026-08-09 16:24     ` Kurt Borja
2026-08-16 21:30   ` Jonathan Cameron
2026-08-17  8:22     ` Andy Shevchenko
2026-08-08  3:58 ` [PATCH v3 3/9] iio: adc: ti-ads1262: support per-channel sampling frequency Kurt Borja
2026-08-08 18:39   ` David Lechner
2026-08-09  8:27     ` Kurt Borja
2026-08-16 21:34   ` Jonathan Cameron [this message]
2026-08-08  3:58 ` [PATCH v3 4/9] iio: adc: ti-ads1262: support per-channel reference and gain Kurt Borja
2026-08-08 18:39   ` David Lechner
2026-08-09  8:28     ` Kurt Borja
2026-08-08  3:58 ` [PATCH v3 5/9] iio: adc: ti-ads1262: support input chopping Kurt Borja
2026-08-08 18:39   ` David Lechner
2026-08-08  3:58 ` [PATCH v3 6/9] iio: adc: ti-ads1262: support excitation currents Kurt Borja
2026-08-08 18:39   ` David Lechner
2026-08-16 21:42   ` Jonathan Cameron
2026-08-08  3:58 ` [PATCH v3 7/9] iio: adc: ti-ads1262: support triggered buffer sampling Kurt Borja
2026-08-08 18:39   ` David Lechner
2026-08-09  8:28     ` Kurt Borja
2026-08-10 16:31       ` David Lechner
2026-08-11 20:24         ` Kurt Borja
2026-08-16 21:54           ` Jonathan Cameron
2026-08-08  3:58 ` [PATCH v3 8/9] iio: adc: ti-ads1262: support REFOUT and VBIAS regulators Kurt Borja
2026-08-08 18:40   ` David Lechner
2026-08-09  8:28     ` Kurt Borja
2026-08-08  3:58 ` [PATCH v3 9/9] iio: adc: ti-ads1262: support common mode supplies Kurt Borja
2026-08-08 18:40   ` David Lechner
2026-08-09  8:29     ` Kurt Borja
2026-08-08 18:37 ` [PATCH v3 0/9] iio: adc: Add TI ADS126X ADC family support David Lechner
2026-08-09  8:29   ` Kurt Borja
2026-08-10 16:42     ` David Lechner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260816223432.64ddf4d0@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=andy@kernel.org \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuurtb@gmail.com \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®