From: Changwoo Min <changwoo@igalia.com>
To: tj@kernel.org, void@manifault.com, arighi@nvidia.com,
changwoo@igalia.com
Cc: kernel-dev@igalia.com, sched-ext@lists.linux.dev,
linux-kernel@vger.kernel.org
Subject: [PATCH] sched_ext: allow ops.cgroup_set_bandwidth() to be sleepable
Date: Tue, 18 Aug 2026 02:09:41 +0900 [thread overview]
Message-ID: <20260817170941.668571-1-changwoo@igalia.com> (raw)
ops.cgroup_set_bandwidth() is delivered from scx_group_set_bandwidth(),
which runs from the cpu.max cgroup interface write path (tg_set_bandwidth())
in process context. tg_set_cfs_bandwidth() has already returned by then, so
its cpus_read_lock and cfs_constraints_mutex are released, and the only lock
held is percpu_down_read(&scx_cgroup_ops_rwsem), whose read side may sleep.
The call site is therefore sleepable, like ops.cgroup_init().
bpf_scx_check_member() rejects a sleepable program on any member not on its
allow-list, so a BPF scheduler cannot allocate -- which is sleepable -- when
a cgroup gains a cpu.max limit at runtime; it must instead pre-reserve memory
for a callback that cannot allocate. Add cgroup_set_bandwidth() to the
allow-list so the callback can allocate on demand, and document that it may
block.
A scheduler must decide at load time whether to mark the callback sleepable,
but the allow-list entry is a verifier property with no symbol to probe. Add
scx_cgroup_set_bandwidth_may_sleep() as a marker whose presence in the
kernel's BTF lets userspace detect this support; it has no callers and does
nothing.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
---
kernel/sched/ext/ext.c | 10 ++++++++++
kernel/sched/ext/ext.h | 1 +
kernel/sched/ext/internal.h | 2 +-
3 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/ext/ext.c b/kernel/sched/ext/ext.c
index 10af28a9f2c0..e25a2e9f4eca 100644
--- a/kernel/sched/ext/ext.c
+++ b/kernel/sched/ext/ext.c
@@ -4960,6 +4960,15 @@ void scx_group_set_bandwidth(struct task_group *tg,
percpu_up_read(&scx_cgroup_ops_rwsem);
}
+
+/*
+ * Capability marker for userspace. The sleepable allowance for
+ * ops.cgroup_set_bandwidth() (see bpf_scx_check_member()) is a verifier
+ * property with no other symbol a scheduler can probe, so this no-op function
+ * exists solely so its presence in the kernel's BTF can be detected. It has no
+ * callers; __used keeps it from being optimized away.
+ */
+__used void scx_cgroup_set_bandwidth_may_sleep(void) {}
#endif /* CONFIG_EXT_GROUP_SCHED */
#if defined(CONFIG_EXT_GROUP_SCHED) || defined(CONFIG_EXT_SUB_SCHED)
@@ -8079,6 +8088,7 @@ static int bpf_scx_check_member(const struct btf_type *t,
case offsetof(struct sched_ext_ops, cgroup_init):
case offsetof(struct sched_ext_ops, cgroup_exit):
case offsetof(struct sched_ext_ops, cgroup_prep_move):
+ case offsetof(struct sched_ext_ops, cgroup_set_bandwidth):
#endif
case offsetof(struct sched_ext_ops, cpu_online):
case offsetof(struct sched_ext_ops, cpu_offline):
diff --git a/kernel/sched/ext/ext.h b/kernel/sched/ext/ext.h
index 0b7fc46aee08..e6fcfadc25aa 100644
--- a/kernel/sched/ext/ext.h
+++ b/kernel/sched/ext/ext.h
@@ -81,6 +81,7 @@ void scx_cgroup_cancel_attach(struct cgroup_taskset *tset);
void scx_group_set_weight(struct task_group *tg, unsigned long cgrp_weight);
void scx_group_set_idle(struct task_group *tg, bool idle);
void scx_group_set_bandwidth(struct task_group *tg, u64 period_us, u64 quota_us, u64 burst_us);
+void scx_cgroup_set_bandwidth_may_sleep(void);
#else /* CONFIG_EXT_GROUP_SCHED */
static inline void scx_tg_init(struct task_group *tg) {}
static inline int scx_tg_online(struct task_group *tg) { return 0; }
diff --git a/kernel/sched/ext/internal.h b/kernel/sched/ext/internal.h
index 27bbf5e04d90..e2d553d13c49 100644
--- a/kernel/sched/ext/internal.h
+++ b/kernel/sched/ext/internal.h
@@ -753,7 +753,7 @@ struct sched_ext_ops {
* @burst_us: bandwidth control burst
*
* Update @cgrp's bandwidth control parameters. This is from the cpu.max
- * cgroup interface.
+ * cgroup interface. This operation may block.
*
* @quota_us / @period_us determines the CPU bandwidth @cgrp is entitled
* to. For example, if @period_us is 1_000_000 and @quota_us is
--
2.55.0
next reply other threads:[~2026-08-17 17:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-17 17:09 Changwoo Min [this message]
2026-08-17 17:53 ` Tejun Heo
2026-08-18 14:15 ` Changwoo Min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260817170941.668571-1-changwoo@igalia.com \
--to=changwoo@igalia.com \
--cc=arighi@nvidia.com \
--cc=kernel-dev@igalia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sched-ext@lists.linux.dev \
--cc=tj@kernel.org \
--cc=void@manifault.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®