mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: pavankumaryalagada@gmail.com
To: Tony Nguyen <anthony.l.nguyen@intel.com>,
	Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: intel-wired-lan@lists.osuosl.org,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	skhan@linuxfoundation.org,
	syzbot+e0abb1d45ac291ebebeb@syzkaller.appspotmail.com,
	kohei@enjuk.jp, aleksandr.loktionov@intel.com,
	Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>
Subject: [PATCH iwl-next v4] e100: prevent shift-out-of-bounds in EEPROM access
Date: Thu, 20 Aug 2026 15:10:45 +0530	[thread overview]
Message-ID: <20260820094045.41400-1-pavankumaryalagada@gmail.com> (raw)

From: Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>

When reading the EEPROM address length, e100_eeprom_read() can return
an invalid length. This value is then used as a shift count when
calculating eeprom_wc, resulting in a shift-out-of-bounds UBSAN warning.

Stop EEPROM address probing if the detected address length exceeds
the initial address length to prevent addr_len from underflowing.

Validate addr_len after reading it from the EEPROM in both
e100_eeprom_load() and e100_eeprom_save(), and return -EIO
if the value is zero or greater than 8.

Reported-by: syzbot+e0abb1d45ac291ebebeb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e0abb1d45ac291ebebeb
Signed-off-by: Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>
---

v4:
 - Squash the v1-v3 changes into a single standalone patch.
 - Prevent addr_len underflow during EEPROM probing.
 - Validate addr_len in e100_eeprom_load() and e100_eeprom_save().
 - Use BIT() and cast the result to u16 for eeprom_wc.
 - Target iwl-next as requested by Tony Nguyen.

v3: https://lore.kernel.org/all/20260816113754.22900-1-pavankumaryalagada@gmail.com/T/

v2: https://lore.kernel.org/all/20260810083355.21631-1-pavankumaryalagada@gmail.com/T/

v1: https://lore.kernel.org/all/20260807145626.52692-1-pavankumaryalagada@gmail.com/T/
---
 drivers/net/ethernet/intel/e100.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 29960762e64a..cd8190386652 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -744,7 +744,14 @@ static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
 		 * complete address.  Use this to adjust addr_len. */
 		ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
 		if (!(ctrl & eedo) && i > 16) {
-			*addr_len -= (i - 16);
+			u16 len = i - 16;
+
+			if (len > *addr_len) {
+				*addr_len = 0;
+				break;
+			}
+
+			*addr_len -= len;
 			i = 17;
 		}
 
@@ -765,7 +772,15 @@ static int e100_eeprom_load(struct nic *nic)
 
 	/* Try reading with an 8-bit addr len to discover actual addr len */
 	e100_eeprom_read(nic, &addr_len, 0);
-	nic->eeprom_wc = 1 << addr_len;
+
+	if (!addr_len || addr_len > 8) {
+		netif_err(nic, probe, nic->netdev,
+			  "Invalid EEPROM address length %u\n",
+			  addr_len);
+		return -EIO;
+	}
+
+	nic->eeprom_wc = (u16)BIT(addr_len);
 
 	for (addr = 0; addr < nic->eeprom_wc; addr++) {
 		nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
@@ -791,7 +806,15 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
 
 	/* Try reading with an 8-bit addr len to discover actual addr len */
 	e100_eeprom_read(nic, &addr_len, 0);
-	nic->eeprom_wc = 1 << addr_len;
+
+	if (!addr_len || addr_len > 8) {
+		netif_err(nic, probe, nic->netdev,
+			  "Invalid EEPROM address length %u\n",
+			  addr_len);
+		return -EIO;
+	}
+
+	nic->eeprom_wc = (u16)BIT(addr_len);
 
 	if (start + count >= nic->eeprom_wc)
 		return -EINVAL;
-- 
2.43.0


             reply	other threads:[~2026-08-20  9:41 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-20  9:40 pavankumaryalagada [this message]
2026-08-24  9:18 ` Yalagada Pavan Kumar
2026-09-08 13:16 ` Loktionov, Aleksandr

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260820094045.41400-1-pavankumaryalagada@gmail.com \
    --to=pavankumaryalagada@gmail.com \
    --cc=aleksandr.loktionov@intel.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=kohei@enjuk.jp \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=przemyslaw.kitszel@intel.com \
    --cc=skhan@linuxfoundation.org \
    --cc=syzbot+e0abb1d45ac291ebebeb@syzkaller.appspotmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®