From: Ziyou Xu <xuziyougm@gmail.com>
To: netdev@vger.kernel.org
Cc: Ziyou Xu <xuziyougm@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Woudstra <ericwouds@gmail.com>,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH net] net: phy: air_en8811h: restore LED GPIO output after MCU restart
Date: Thu, 20 Aug 2026 22:10:34 +0800 [thread overview]
Message-ID: <20260820141034.1400439-1-xuziyougm@gmail.com> (raw)
en8811h_probe() enables the GPIO3/4/5 output bits after loading the
MD32 firmware, but a subsequent config_init() restarts the MCU, which
clears EN8811H_GPIO_OUTPUT[5:3]. The LED event registers survive the
restart, so the LEDs work during early boot and then go dark after the
MCU is restarted.
Move the GPIO output setup into config_init() so it is reapplied after
every MCU restart.
Tested with warm reboot, cold boot and cable unplug/replug. The failure
was confirmed by reading EN8811H_GPIO_OUTPUT as 0x00; setting only
EN8811H_GPIO_OUTPUT_345 was sufficient to restore the LEDs.
Fixes: 71e79430117d ("net: phy: air_en8811h: Add the Airoha EN8811H PHY driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ziyou Xu <xuziyougm@gmail.com>
---
drivers/net/phy/air_en8811h.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/air_en8811h.c b/drivers/net/phy/air_en8811h.c
index edd49c193..fbd87fc71 100644
--- a/drivers/net/phy/air_en8811h.c
+++ b/drivers/net/phy/air_en8811h.c
@@ -1173,13 +1173,6 @@ static int en8811h_probe(struct phy_device *phydev)
if (ret)
return ret;
- /* Configure led gpio pins as output */
- ret = air_phy_buckpbus_reg_modify(phydev, EN8811H_GPIO_OUTPUT,
- EN8811H_GPIO_OUTPUT_345,
- EN8811H_GPIO_OUTPUT_345);
- if (ret < 0)
- return ret;
-
return 0;
}
@@ -1317,6 +1310,16 @@ static int en8811h_config_init(struct phy_device *phydev)
if (ret < 0)
return ret;
+ /*
+ * Restarting MD32 clears the GPIO3/4/5 output enable bits. Restore
+ * them after every restart, before enabling the corresponding LEDs.
+ */
+ ret = air_phy_buckpbus_reg_modify(phydev, EN8811H_GPIO_OUTPUT,
+ EN8811H_GPIO_OUTPUT_345,
+ EN8811H_GPIO_OUTPUT_345);
+ if (ret < 0)
+ return ret;
+
ret = air_leds_init(phydev, EN8811H_LED_COUNT, AIR_PHY_LED_DUR,
AIR_LED_MODE_USER_DEFINE);
if (ret < 0) {
base-commit: 564973a259ec76f2dad0853420e7034cc43994c4
--
2.43.0
next reply other threads:[~2026-08-20 14:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-20 14:10 Ziyou Xu [this message]
2026-08-24 18:50 ` Jakub Kicinski
2026-08-25 3:14 ` js node
2026-08-27 15:33 ` Jakub Kicinski
2026-08-28 2:59 ` Ziyou Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260820141034.1400439-1-xuziyougm@gmail.com \
--to=xuziyougm@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=ericwouds@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®