From: Vikas Gupta <vikas.gupta@broadcom.com>
To: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, andrew+netdev@lunn.ch, horms@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
bhargava.marreddy@broadcom.com, rahul-rg.gupta@broadcom.com,
vsrama-krishna.nemani@broadcom.com,
rajashekar.hudumula@broadcom.com, dharmender.garg@broadcom.com,
ajit.khaparde@broadcom.com,
Vikas Gupta <vikas.gupta@broadcom.com>
Subject: [PATCH net v2] bnge: add missing ndo_set_features
Date: Thu, 27 Aug 2026 21:42:30 +0530 [thread overview]
Message-ID: <20260827161230.1724658-1-vikas.gupta@broadcom.com> (raw)
The driver advertises togglable RX aggregation offloads (LRO and
GRO_HW) in netdev->hw_features but is missing the ndo_set_features
callback, so it is never notified of a feature change.
For example:
ethtool -K ethX rx-gro-hw off
is accepted - netdev_update_features() clears the bit in dev->features
but the driver never reprograms the hardware, so the TPA engine keeps
aggregating and dev->features no longer reflects the actual hardware
state.
Add ndo_set_features to reprogram TPA (LRO/GRO_HW) and the RX ring
parameters when these features change.
Fixes: c2effd12c96d ("bng_en: Add support for TPA events")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
---
v2:
- Sashiko's points addressed.
Sending FUNC_DRV_IF_CHANGE_REQ_FLAGS_UP twice is safe and no DOWN is
ever skipped. Reworking the handshake so if_change sits only at the
ndo_open/ndo_stop boundary is a reasonable cleanup, but it's out of
scope for this patch and will be handled in a follow-up.
.../net/ethernet/broadcom/bnge/bnge_netdev.c | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnge/bnge_netdev.c b/drivers/net/ethernet/broadcom/bnge/bnge_netdev.c
index a4288f0258f8..13573a2b78ef 100644
--- a/drivers/net/ethernet/broadcom/bnge/bnge_netdev.c
+++ b/drivers/net/ethernet/broadcom/bnge/bnge_netdev.c
@@ -3155,6 +3155,9 @@ static void bnge_close_core(struct bnge_net *bn)
{
struct bnge_dev *bd = bn->bd;
+ if (!bn->bnapi)
+ return;
+
bnge_tx_disable(bn);
clear_bit(BNGE_STATE_OPEN, &bd->state);
@@ -3267,6 +3270,44 @@ static const struct netdev_stat_ops bnge_stat_ops = {
.get_base_stats = bnge_get_base_stats,
};
+static int bnge_set_features(struct net_device *dev, netdev_features_t features)
+{
+ struct bnge_net *bn = netdev_priv(dev);
+ struct bnge_dev *bd = bn->bd;
+ u32 old_flags = bn->priv_flags;
+ u32 flags = old_flags;
+ int rc;
+
+ flags &= ~BNGE_NET_EN_TPA;
+ if (features & NETIF_F_GRO_HW)
+ flags |= BNGE_NET_EN_GRO;
+ else if (features & NETIF_F_LRO)
+ flags |= BNGE_NET_EN_LRO;
+
+ if (flags == old_flags)
+ return 0;
+
+ if (!netif_running(dev)) {
+ bn->priv_flags = flags;
+ bnge_set_ring_params(bd);
+ return 0;
+ }
+
+ bnge_close_core(bn);
+ bn->priv_flags = flags;
+ bnge_set_ring_params(bd);
+
+ rc = bnge_open_core(bn);
+ if (rc) {
+ netdev_err(dev, "bnge_open_core err: %d\n", rc);
+ bn->priv_flags = old_flags;
+ bnge_set_ring_params(bd);
+ netif_close(dev);
+ }
+
+ return rc;
+}
+
static const struct net_device_ops bnge_netdev_ops = {
.ndo_open = bnge_open,
.ndo_stop = bnge_close,
@@ -3274,6 +3315,7 @@ static const struct net_device_ops bnge_netdev_ops = {
.ndo_get_stats64 = bnge_get_stats64,
.ndo_set_rx_mode_async = bnge_set_rx_mode,
.ndo_features_check = bnge_features_check,
+ .ndo_set_features = bnge_set_features,
};
static void bnge_init_mac_addr(struct bnge_dev *bd)
--
2.47.1
next reply other threads:[~2026-08-27 16:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-27 16:12 Vikas Gupta [this message]
2026-08-27 16:42 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260827161230.1724658-1-vikas.gupta@broadcom.com \
--to=vikas.gupta@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=andrew+netdev@lunn.ch \
--cc=bhargava.marreddy@broadcom.com \
--cc=davem@davemloft.net \
--cc=dharmender.garg@broadcom.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rahul-rg.gupta@broadcom.com \
--cc=rajashekar.hudumula@broadcom.com \
--cc=vsrama-krishna.nemani@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®