[PATCH 0/2] mtd: rawnand: vf610_nfc: fix the OOB of written pages and the command completion

[Mehmet Fide <mehmet.fide@gmail.com>]

From: Mehmet Fide <mehmet.fide@screeningeagle.com>

Two pre-existing issues found while checking the Sashiko report Miquel
pointed at on the large-OOB series [1]; they are independent of that
fix, so they come separately.

The first has been there since the ->exec_op() conversion: the ECC page
write transfers the spare area out of the controller SRAM but nothing
ever puts chip->oob_poi there, so every written page gets whatever the
previous transfer left behind as its OOB. The second is as old as the
driver: a command that timed out can still complete cmd_done from its
late interrupt, and the next command then returns before the hardware
is done.

Tested on a Colibri VF50 and a Colibri VF61 on top of the large-OOB v2
series: UBIFS write/read-back intact, clean ECC counters.

[1] https://lore.kernel.org/linux-mtd/20260818114208.2780311-1-mehmet.fide@gmail.com/


Mehmet Fide (2):
  mtd: rawnand: vf610_nfc: write the OOB bytes on page writes
  mtd: rawnand: vf610_nfc: rearm the completion before starting a
    command

 drivers/mtd/nand/raw/vf610_nfc.c | 6 ++++++
 1 file changed, 6 insertions(+)

-- 
2.54.0