From: Sven Peter <sven@kernel.org>
To: Andreas Noever <andreas.noever@gmail.com>,
Mika Westerberg <westeri@kernel.org>,
Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>,
Konrad Dybcio <konradybcio@kernel.org>,
asahi@lists.linux.dev, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
Sven Peter <sven@kernel.org>
Subject: [PATCH v3 4/7] thunderbolt: Don't access a DP tunnel after its DPRX read was canceled
Date: Sat, 29 Aug 2026 10:08:36 +0200 [thread overview]
Message-ID: <20260829-b4-tbt-fixes-v3-4-e1fab6ac54fe@kernel.org> (raw)
In-Reply-To: <20260829-b4-tbt-fixes-v3-0-e1fab6ac54fe@kernel.org>
tb_dp_dprx_work checks dprx_canceled before it takes tb->lock so it
misses a tb_dp_dprx_stop that could not cancel the already running
work. It then polls the DPRX capabilities and runs the callback for a
tunnel that has already been torn down while the domain is suspending or
going away.
This can be hit by cancelling the DPRX read from outside the ordered
tb->wq: During suspend tb_disconnect_and_release_dp does just this and
with a later patch tb_stop will do it as well. The latter in
combination with the Apple NHI where the DPRX read never completed is
how I hit this.
Check the flag with tb->lock held instead and check it again in
tb_dp_tunnel_active because the callback runs after the lock has been
dropped again.
Also clear the flag in tb_dp_dprx_start so that it only ever describes
the work that is currently in flight.
Fixes: d6d458d42e1e ("thunderbolt: Handle DisplayPort tunnel activation asynchronously")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Peter <sven@kernel.org>
---
drivers/thunderbolt/tb.c | 12 ++++++++++++
drivers/thunderbolt/tunnel.c | 11 +++++++++--
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index ef4413581b2a..088323cd876d 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -1912,6 +1912,18 @@ static void tb_dp_tunnel_active(struct tb_tunnel *tunnel, void *data)
struct tb *tb = data;
mutex_lock(&tb->lock);
+
+ /*
+ * If the DPRX read was canceled the tunnel is already being torn
+ * down by whoever canceled it. Do not touch the adapters here
+ * because the routers may be gone by now.
+ */
+ if (tunnel->dprx_canceled) {
+ tb_tunnel_dbg(tunnel, "DPRX read canceled, not activating\n");
+ mutex_unlock(&tb->lock);
+ return;
+ }
+
if (tb_tunnel_is_active(tunnel)) {
int consumed_up, consumed_down, ret;
diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index 00c5a1933544..5f536635908f 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -1090,8 +1090,14 @@ static void tb_dp_dprx_work(struct work_struct *work)
struct tb_tunnel *tunnel = container_of(work, typeof(*tunnel), dprx_work.work);
struct tb *tb = tunnel->tb;
+ /*
+ * The DPRX read can be canceled while this work is waiting for
+ * tb->lock. Check the flag only once it is held: while the lock is
+ * held the tunnel cannot be torn down under us and the adapters are
+ * safe to access.
+ */
+ mutex_lock(&tb->lock);
if (!tunnel->dprx_canceled) {
- mutex_lock(&tb->lock);
if (tb_dp_is_usb4(tunnel->src_port->sw) &&
tb_dp_wait_dprx(tunnel, TB_DPRX_WAIT_TIMEOUT)) {
if (ktime_before(ktime_get(), tunnel->dprx_timeout)) {
@@ -1103,8 +1109,8 @@ static void tb_dp_dprx_work(struct work_struct *work)
} else {
tb_tunnel_set_active(tunnel, true);
}
- mutex_unlock(&tb->lock);
}
+ mutex_unlock(&tb->lock);
tunnel->callback(tunnel, tunnel->callback_data);
tb_tunnel_put(tunnel);
@@ -1121,6 +1127,7 @@ static int tb_dp_dprx_start(struct tb_tunnel *tunnel)
tb_domain_get(tunnel->tb);
tunnel->dprx_started = true;
+ tunnel->dprx_canceled = false;
tunnel->dprx_timeout = dprx_timeout_to_ktime(dprx_timeout);
queue_delayed_work(tunnel->tb->wq, &tunnel->dprx_work, 0);
--
2.55.0
next prev parent reply other threads:[~2026-08-29 8:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-29 8:08 [PATCH v3 0/7] thunderbolt: Fix DP tunnel teardown while an async DPRX read is running Sven Peter
2026-08-29 8:08 ` [PATCH v3 1/7] thunderbolt: Hold a router reference for each allocated HopID Sven Peter
2026-08-29 8:08 ` [PATCH v3 2/7] thunderbolt: Make the DP tunnel activation callback mandatory Sven Peter
2026-08-29 8:08 ` [PATCH v3 3/7] thunderbolt: Fix domain reference leak when DPRX read is canceled Sven Peter
2026-08-29 8:08 ` Sven Peter [this message]
2026-08-29 8:08 ` [PATCH v3 5/7] thunderbolt: Mark discovered tunnels as active Sven Peter
2026-08-29 8:08 ` [PATCH v3 6/7] thunderbolt: Tear down inactive DP tunnels when the domain is stopped Sven Peter
2026-08-29 8:08 ` [PATCH v3 7/7] thunderbolt: Drop the DP tunnel activation callback data Sven Peter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260829-b4-tbt-fixes-v3-4-e1fab6ac54fe@kernel.org \
--to=sven@kernel.org \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=asahi@lists.linux.dev \
--cc=konradybcio@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=stable@vger.kernel.org \
--cc=westeri@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®