[PATCH] ARM: dts: helios4: fix spi1 location

[Rosen Penev <rosenp@gmail.com>]

This spi node is specified in armada-38x.dtsi with proper compatible
strings whereas they are not present here. Instead of copy and pasting
various lines, just reference the node in the dtsi.

This dts seems to predate the move of spi from internal-regs to the soc
node so this moves it in line there.

Allows proper probing of SPI at runtime.

Remove the microsom_spi1_cs_pins pinctrl group and its reference in
&spi1. The group only muxed mpp59 to the "spi1" function, but that
pin (SPI1 cs0) is already covered by spi1_pins, which selects the
same function for mpp56-59 in armada-38x.dtsi.

Fixes: ced8025b569e ("ARM: dts: armada388-helios4")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 .../arm/boot/dts/marvell/armada-388-helios4.dts | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/armada-388-helios4.dts b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
index 9de9a8a4267c..ae03d42f92a0 100644
--- a/arch/arm/boot/dts/marvell/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
@@ -254,13 +254,6 @@ sata3: sata-port@1 {
 				};
 			};
 
-			spi@10680 {
-				pinctrl-0 = <&spi1_pins
-					     &microsom_spi1_cs_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
 			sdhci@d8000 {
 				bus-width = <4>;
 				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
@@ -327,11 +320,13 @@ helios_fan2_pins: helios_fan2_pins {
 					marvell,pins = "mpp48", "mpp55";
 					marvell,function = "gpio";
 				};
-				microsom_spi1_cs_pins: spi1-cs-pins {
-					marvell,pins = "mpp59";
-					marvell,function = "spi1";
-				};
 			};
 		};
 	};
 };
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
2.55.0