[PATCH v2] serial: qcom-geni: Fix port_ida handling for console and probe errors

[Aniket Randive <aniket.randive@oss.qualcomm.com>]

The console port uses a fixed line number and is not allocated from
port_ida. However, qcom_geni_serial_remove() unconditionally frees the
line number for all ports, including the console port.

Skip ida_free() for console ports so that only IDs allocated from
port_ida are returned.

Also release allocated IDs from the common probe error path. Currently,
IDs are freed only on the wake-IRQ failure path, causing leaks when
probe fails after a successful allocation. Move the ida_free() call to
the common error path and guard it for console ports.

Route resources_init() failures through the common error path so the
allocated line number is released correctly.

Allocate the port structure before calling ida_alloc_range() in
get_port_from_line(). This prevents IDs from being left allocated when
memory allocation fails.

Signed-off-by: Aniket Randive <aniket.randive@oss.qualcomm.com>
---
Changes in v2:
- Route port->dev_data->resources_init() failures through the common
error path so allocated line numbers are not leaked.
- Allocate the port structure before ida_alloc_range() in
get_port_from_line() to prevent ID leaks on memory-allocation
failures.
---
Link to v1: https://patch.msgid.link/20260828-master-v1-1-1f8afa5f82c2@oss.qualcomm.com
---
 drivers/tty/serial/qcom_geni_serial.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 3633723acef8..ceaf560fd8dd 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -289,6 +289,10 @@ static struct qcom_geni_serial_port *get_port_from_line(int line, bool console,
 	} else {
 		int max_alias_num = of_alias_get_highest_id("serial");
 
+		port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+		if (!port)
+			return ERR_PTR(-ENOMEM);
+
 		if (line < 0 || line >= nr_ports)
 			line = ida_alloc_range(&port_ida, max_alias_num + 1,
 					       nr_ports - 1, GFP_KERNEL);
@@ -299,10 +303,6 @@ static struct qcom_geni_serial_port *get_port_from_line(int line, bool console,
 		if (line < 0)
 			return ERR_PTR(-ENXIO);
 
-		port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
-		if (!port)
-			return ERR_PTR(-ENOMEM);
-
 		port->uport.iotype = UPIO_MEM;
 		port->uport.ops = &qcom_geni_uart_pops;
 		port->uport.flags = UPF_BOOT_AUTOCONF;
@@ -1897,7 +1897,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 
 	ret = port->dev_data->resources_init(&port->se);
 	if (ret)
-		return ret;
+		goto error;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -1979,7 +1979,6 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 						port->wakeup_irq);
 		if (ret) {
 			device_init_wakeup(&pdev->dev, false);
-			ida_free(&port_ida, uport->line);
 			goto error;
 		}
 	}
@@ -2003,6 +2002,8 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	return 0;
 
 error:
+	if (!data->console)
+		ida_free(&port_ida, uport->line);
 	if (port->rx_dma_addr) {
 		dma_unmap_single(pdev->dev.parent, port->rx_dma_addr,
 				 DMA_RX_BUF_SIZE, DMA_FROM_DEVICE);
@@ -2024,7 +2025,8 @@ static void qcom_geni_serial_remove(struct platform_device *pdev)
 	irq_work_sync(&port->tx_kick);
 	dev_pm_clear_wake_irq(&pdev->dev);
 	device_init_wakeup(&pdev->dev, false);
-	ida_free(&port_ida, uport->line);
+	if (!port->dev_data->console)
+		ida_free(&port_ida, uport->line);
 	uart_remove_one_port(drv, &port->uport);
 
 	if (port->rx_dma_addr) {

---
base-commit: a8406e6c0b793ce0788019683837c40855b55995
change-id: 20260828-master-3e806ba3492d

Best regards,
--  
Aniket Randive <aniket.randive@oss.qualcomm.com>