mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jakub Kicinski <kuba@kernel.org>
To: Khawar Ahemad <ahemadkhawar123@gmail.com>
Cc: bpf@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, magnus.karlsson@intel.com,
	maciej.fijalkowski@intel.com, sdf@fomichev.me, ast@kernel.org,
	daniel@iogearbox.net, hawk@kernel.org, john.fastabend@gmail.com,
	pabeni@redhat.com, edumazet@google.com, horms@kernel.org,
	syzbot+aa48b5fe7bfda62d1682@syzkaller.appspotmail.com
Subject: Re: [PATCH bpf-next v4] xsk: Fix circular locking dependency between &net->xdp.lock, &xs->mutex, and netdev_lock_ops
Date: Mon, 31 Aug 2026 17:51:49 -0700	[thread overview]
Message-ID: <20260831175149.6a13c2a3@kernel.org> (raw)
In-Reply-To: <20260826174744.3394-1-ahemadkhawar123@gmail.com>

On Wed, 26 Aug 2026 23:17:44 +0530 Khawar Ahemad wrote:
> Subject: [PATCH bpf-next v4] xsk: Fix circular locking dependency between &net->xdp.lock, &xs->mutex, and netdev_lock_ops

This patch got assigned to netdev in patchwork, which means it should
go via the networking trees. When reposting please tag it as 
[PATCH net v5] rather than bpf-next.

> syzbot reported a circular locking dependency involving &net->xdp.lock,
> &port->pnodes_lock, netdev_lock_ops(), and &xs->mutex:
> 
> -> #3 (&net->xdp.lock):  
>        xsk_notifier+0x3d/0x2c0 net/xdp/xsk.c:2106
>        ipvlan_device_event+0x310/0x4e0 drivers/net/ipvlan/ipvlan_main.c:834
>        unregister_netdevice_many_notify+0x808/0x18b0 net/core/dev.c:12518
> 
> -> #2 (&port->pnodes_lock):  
>        ipvlan_device_event+0x85/0x4e0 drivers/net/ipvlan/ipvlan_main.c:795
>        notifier_call_chain+0xb5/0x410 kernel/notifier.c:85
> 
> -> #1 (&dev_instance_lock_key / netdev_lock_ops):  
>        netdev_lock_ops include/net/netdev_lock.h:42 [inline]
>        xsk_bind+0x331/0x11d0 net/xdp/xsk.c:1627
> 
> -> #0 (&xs->mutex):  
>        xsk_diag_fill net/xdp/xsk_diag.c:113 [inline]
>        xsk_diag_dump+0x2e0/0x4e0 net/xdp/xsk_diag.c:166
> 
> The cycle exists through the following dependency chain:
> 1. xsk_diag_dump() acquired &xs->mutex while holding &net->xdp.lock (#0).
> 2. xsk_bind() acquired netdev_lock_ops() while holding &xs->mutex (#1).
> 3. Device unregistration in ipvlan_device_event() acquired
>    &port->pnodes_lock (#2) and called xsk_notifier(), which acquired
>    &net->xdp.lock (#3).

This description is not super clear on what creates the cycle TBH.
Please clean this up.

> Break the circular dependency by decoupling the locking in xsk_diag_dump()
> and xsk_notifier():
> 
> 1. In xsk_diag_dump(), avoid holding &net->xdp.lock while calling
>    xsk_diag_fill(). Instead, locate the target socket under &net->xdp.lock,
>    take a temporary socket reference via sock_hold(), release
>    &net->xdp.lock, and call xsk_diag_fill() (which acquires &xs->mutex)
>    with sock_put().
>    To preserve dump continuation across buffer exhaustion, distinguish
>    -ENOENT (when an unbound socket is skipped) from -EMSGSIZE (when the
>    skb is full and the cursor must be retained for the next dump callback).

Why are you doing this? We still take the socket logs under the netns
in the notifier so does this actually fix anything?..

> 2. In xsk_notifier(), split device unregistration into two phases:
>    - First, unbind all matching sockets under &net->xdp.lock and
>      &xs->mutex.
>    - Then, release &net->xdp.lock and perform device queue teardown by
>      sweeping the device queues via xsk_get_pool_from_qid() and calling
>      xp_clear_dev(pool) outside all AF_XDP locks.

..IOW isn't fixing this enough? 

> Fixes: 975b11ae9077 ("xsk: add socket allocate, create and bind")

Hallucination. Besides, if the problem in the netdev lock - pretty sure
it didn't exist when xsk was added.

> Reported-by: syzbot+aa48b5fe7bfda62d1682@syzkaller.appspotmail.com
> Closes: https://syzkaller.appspot.com/bug?extid=aa48b5fe7bfda62d1682
> Signed-off-by: Khawar Ahemad <ahemadkhawar123@gmail.com>

> diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> index 7855ee09c4..e72344fccb 100644
> --- a/net/xdp/xsk.c
> +++ b/net/xdp/xsk.c
> @@ -2099,7 +2099,9 @@ static int xsk_notifier(struct notifier_block *this,
>  {
>  	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
>  	struct net *net = dev_net(dev);
> +	unsigned int max_queues;
>  	struct sock *sk;
> +	u16 qid;
>  
>  	switch (msg) {
>  	case NETDEV_UNREGISTER:
> @@ -2114,13 +2116,21 @@ static int xsk_notifier(struct notifier_block *this,
>  					sk_error_report(sk);
>  
>  				xsk_unbind_dev(xs);
> -
> -				/* Clear device references. */
> -				xp_clear_dev(xs->pool);
>  			}
>  			mutex_unlock(&xs->mutex);
>  		}
>  		mutex_unlock(&net->xdp.lock);
> +
> +		/* Clear device references outside AF_XDP locks to avoid
> +		 * lock inversion with netdev_lock_ops().
> +		 */
> +		max_queues = max(dev->real_num_rx_queues, dev->real_num_tx_queues);
> +		for (qid = 0; qid < max_queues; qid++) {
> +			struct xsk_buff_pool *pool = xsk_get_pool_from_qid(dev, qid);

This will not work for leased queues.
Just collect the sockets in the loop above and hold them like you did
on the diag side. Then you can walk the sockets and use xs->pool.

> +			if (pool)
> +				xp_clear_dev(pool);
> +		}
>  		break;
>  	}
>  	return NOTIFY_DONE;
> diff --git a/net/xdp/xsk_diag.c b/net/xdp/xsk_diag.c
> index 0170363eb5..bad0b13064 100644
> --- a/net/xdp/xsk_diag.c
> +++ b/net/xdp/xsk_diag.c
> @@ -97,6 +97,7 @@ static int xsk_diag_fill(struct sock *sk, struct sk_buff *nlskb,
>  	struct xdp_sock *xs = xdp_sk(sk);
>  	struct xdp_diag_msg *msg;
>  	struct nlmsghdr *nlh;
> +	int err = -EMSGSIZE;
>  
>  	nlh = nlmsg_put(nlskb, portid, seq, SOCK_DIAG_BY_FAMILY, sizeof(*msg),
>  			flags);
> @@ -111,8 +112,10 @@ static int xsk_diag_fill(struct sock *sk, struct sk_buff *nlskb,
>  	sock_diag_save_cookie(sk, msg->xdiag_cookie);
>  
>  	mutex_lock(&xs->mutex);
> -	if (READ_ONCE(xs->state) == XSK_UNBOUND)
> +	if (READ_ONCE(xs->state) == XSK_UNBOUND) {
> +		err = -ENOENT;

If the caller has no special handling for this just return 0
but I'm not sure this is right. The socket is no longer listed
so we shouldn't count against the iterator.

>  		goto out_nlmsg_trim;
> +	}
>  
>  	if ((req->xdiag_show & XDP_SHOW_INFO) && xsk_diag_put_info(xs, nlskb))
>  		goto out_nlmsg_trim;
> @@ -145,7 +148,7 @@ static int xsk_diag_fill(struct sock *sk, struct sk_buff *nlskb,
>  out_nlmsg_trim:
>  	mutex_unlock(&xs->mutex);
>  	nlmsg_cancel(nlskb, nlh);
> -	return -EMSGSIZE;
> +	return err;
>  }
-- 
pw-bot: cr

      parent reply	other threads:[~2026-09-01  0:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-26 17:47 Khawar Ahemad
2026-08-26 18:45 ` bot+bpf-ci
2026-09-01  0:51 ` Jakub Kicinski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260831175149.6a13c2a3@kernel.org \
    --to=kuba@kernel.org \
    --cc=ahemadkhawar123@gmail.com \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=edumazet@google.com \
    --cc=hawk@kernel.org \
    --cc=horms@kernel.org \
    --cc=john.fastabend@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maciej.fijalkowski@intel.com \
    --cc=magnus.karlsson@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sdf@fomichev.me \
    --cc=syzbot+aa48b5fe7bfda62d1682@syzkaller.appspotmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®