[PATCH] ALSA: dummy: Report a change when one capture switch channel moves

[HyeongJun An <sammiee5311@gmail.com>]

The snd_dummy_capsrc_put() builds its change flag with &&, so it reports
a change only when both channels move at once.  Writing a single channel
stores the new value and returns 0, the control core then sends no
SNDRV_CTL_EVENT_MASK_VALUE, and a second reader keeps showing the old
setting until it polls again.

The volume put a few lines above compares the same pair of channels with
||.

The mixer selftest already reports this.  With snd-dummy loaded it fails
event_missing on all five capture switches:

  # CD Capture Switch.1 orig 0 read 1, is_volatile 0
  not ok 13 event_missing.Dummy.9

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Assisted-by: Claude:claude-opus-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
---
Verified side by side on 6.17.0-35-generic.  The v6.17 dummy.c with only
this change built as a second module registers as Dummy_1 alongside the
stock Dummy, and mixer-test then reports:

  ok     6 event_missing.Dummy_1.10   ... all 11 pass
  not ok 90 event_missing.Dummy.9
  not ok 104 event_missing.Dummy.7
  not ok 118 event_missing.Dummy.5
  not ok 132 event_missing.Dummy.3
  not ok 146 event_missing.Dummy.1

The five that fail are the capture switches.  The volume controls in
between already use ||.

 sound/drivers/dummy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c
index b908d2564aee..3f6bfee29986 100644
--- a/sound/drivers/dummy.c
+++ b/sound/drivers/dummy.c
@@ -808,7 +808,7 @@ static int snd_dummy_capsrc_put(struct snd_kcontrol *kcontrol, struct snd_ctl_el
 	left = ucontrol->value.integer.value[0] & 1;
 	right = ucontrol->value.integer.value[1] & 1;
 	guard(spinlock_irq)(&dummy->mixer_lock);
-	change = dummy->capture_source[addr][0] != left &&
+	change = dummy->capture_source[addr][0] != left ||
 	         dummy->capture_source[addr][1] != right;
 	dummy->capture_source[addr][0] = left;
 	dummy->capture_source[addr][1] = right;
-- 
2.43.0