mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Dai <zdai@linux.ibm.com>
To: jv@jvosburgh.net, andrew+netdev@lunn.ch, davem@davemloft.net,
	edumazet@google.com, kuba@kernel.org, pabeni@redhat.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	pradeeps@linux.ibm.com, zdai@linux.ibm.com
Subject: [PATCH 1/1] bonding: crypto offload enabled, non-offload slave failover, rekey failed
Date: Thu,  3 Sep 2026 17:01:23 -0500	[thread overview]
Message-ID: <20260903220123.475685-1-zdai@linux.ibm.com> (raw)

Create a bonding device (i.e. bond0) in active-backup mode, 2 slaves.
Active slave: offload capable interface (i.e. eth1), primary interface.
Backup slave: non-offload capable interface(i.e. eth2).
Configure strongswan service swantl.conf child SA "hw_offload = crypto"
Start strongswan service
IPSec Crytpo Offload is enabled on top of bond0. i.e. 
ip xfrm state |grep offload
        crypto offload parameters: dev bond0 dir out mode crypto
	crypto offload parameters: dev bond0 dir in mode crypto

Active slave eth1 takes adavantage of IPSec Crypto Offload capability. 

If active slave eth1 is down for any reason (i.e. eth1 link down):
ip link set down dev eth1
non-offload capable interface eth2 failover to becomes active slave. 
The existing SAs can continue use software IPsec after failover.
Traffic still keeps going properly.

However if eth1 link had not recovered yet, strongswan service does
new child SA rekey, or uses swanctl command to do new child SA rekey, 
it will fail because active slave eth2 doesn't support crypto offload.
In bond_ipsec_add_sa routine, it returns -EINVAL now, which is 
treated as fatal error by xfrm_dev_state_add routine in kernel xfrm.

To make the non-offload active slave survive the child SA rekey, need 
to make bond_ipsec_add_sa routine returns -EOPNOTSUPP instead when 
active slave doesn't support IPsec Crypto offload, the xfrm will 
gracefully fallback to create new SA using Software IPsec. 
Network traffic can keep going.

After offload capable interface eth1 link is up, becomes active slave,
next time strongswan child SA rekey will create a new SA which enables
crypto offload again.

This way, network traffic is never interrupted, always keeps going.

Signed-off-by: David Dai <zdai@linux.ibm.com>
Tested-by: David Dai <zdai@linux.ibm.com>
---
 drivers/net/bonding/bond_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index ef9eb0c53c66..79fc892dab07 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -490,7 +490,7 @@ static int bond_ipsec_add_sa(struct net_device *bond_dev,
 	    !real_dev->xfrmdev_ops->xdo_dev_state_add ||
 	    netif_is_bond_master(real_dev)) {
 		NL_SET_ERR_MSG_MOD(extack, "Slave does not support ipsec offload");
-		err = -EINVAL;
+		err = -EOPNOTSUPP;
 		goto out;
 	}
 
-- 
2.55.0


             reply	other threads:[~2026-09-03 22:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-03 22:01 David Dai [this message]
2026-09-04  6:11 ` Hangbin Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260903220123.475685-1-zdai@linux.ibm.com \
    --to=zdai@linux.ibm.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=jv@jvosburgh.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pradeeps@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®