[PATCH v2 03/19] accel: ethosu: Disable clocks on PM setup failure

["Rob Herring (Arm)" <robh@kernel.org>]

ethosu_init() enables the clocks directly to reset and query the NPU
before runtime PM takes over. If runtime-PM setup fails, the error path
returns while those clocks remain enabled.

Disable the clocks before returning the setup error to balance the
initial direct resume.

Fixes: 5a5e9c0228e6 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
v2:
 - new patch
---
 drivers/accel/ethosu/ethosu_drv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/accel/ethosu/ethosu_drv.c b/drivers/accel/ethosu/ethosu_drv.c
index c684e28ac787..65b148e770e5 100644
--- a/drivers/accel/ethosu/ethosu_drv.c
+++ b/drivers/accel/ethosu/ethosu_drv.c
@@ -311,8 +311,10 @@ static int ethosu_init(struct ethosu_device *ethosudev)
 	pm_runtime_set_autosuspend_delay(ethosudev->base.dev, 50);
 	pm_runtime_use_autosuspend(ethosudev->base.dev);
 	ret = devm_pm_runtime_set_active_enabled(ethosudev->base.dev);
-	if (ret)
+	if (ret) {
+		ethosu_device_suspend(ethosudev->base.dev);
 		return ret;
+	}
 	pm_runtime_get_noresume(ethosudev->base.dev);
 
 	ethosudev->npu_info.id = id = readl_relaxed(ethosudev->regs + NPU_REG_ID);

-- 
2.53.0