From: Hemanth Selam <hemanth.selam@gmail.com>
To: Hans de Goede <hansg@kernel.org>,
Guenter Roeck <linux@roeck-us.net>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Steve Glendinning <steve.glendinning@shawell.net>
Cc: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org
Subject: [PATCH] hwmon: fix typos in comments
Date: Fri, 4 Sep 2026 17:12:46 +0530 [thread overview]
Message-ID: <20260904114249.26515-1-hemanth.selam@gmail.com> (raw)
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
drivers/hwmon/abituguru.c | 4 ++--
drivers/hwmon/adm1177.c | 2 +-
drivers/hwmon/adt7x10.c | 2 +-
drivers/hwmon/emc2103.c | 2 +-
drivers/hwmon/lm85.c | 2 +-
drivers/hwmon/pmbus/mp2888.c | 4 ++--
6 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index ba8c68ae4595..3bb959d16dbf 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -475,7 +475,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
u8 val, test_flag, buf[3];
int i, ret = -ENODEV; /* error is the most common used retval :| */
- /* If overriden by the user return the user selected type */
+ /* If overridden by the user return the user selected type */
if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
bank1_types[sensor_addr] <= ABIT_UGURU_NC) {
ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
@@ -1262,7 +1262,7 @@ static int abituguru_probe(struct platform_device *pdev)
/*
* El weirdo probe order, to keep the sysfs order identical to the
- * BIOS and window-appliction listing order.
+ * BIOS and window-application listing order.
*/
static const u8 probe_order[ABIT_UGURU_MAX_BANK1_SENSORS] = {
0x00, 0x01, 0x03, 0x04, 0x0A, 0x08, 0x0E, 0x02,
diff --git a/drivers/hwmon/adm1177.c b/drivers/hwmon/adm1177.c
index dc4d8a214d1b..85ad4a3009bd 100644
--- a/drivers/hwmon/adm1177.c
+++ b/drivers/hwmon/adm1177.c
@@ -105,7 +105,7 @@ static int adm1177_read(struct device *dev, enum hwmon_sensor_types type,
return ret;
dummy = (data[0] << 4) | (data[2] >> 4);
/*
- * convert to millivolts based on resistor devision
+ * convert to millivolts based on resistor division
* (V_fullscale / 4096) * raw
*/
if (st->vrange_high)
diff --git a/drivers/hwmon/adt7x10.c b/drivers/hwmon/adt7x10.c
index d003ee3ebf06..f99d38e82d0b 100644
--- a/drivers/hwmon/adt7x10.c
+++ b/drivers/hwmon/adt7x10.c
@@ -338,7 +338,7 @@ int adt7x10_probe(struct device *dev, const char *name, int irq,
data->oldconfig = config;
/*
- * Set to 16 bit resolution, continous conversion and comparator mode.
+ * Set to 16 bit resolution, continuous conversion and comparator mode.
*/
data->config = data->oldconfig;
data->config &= ~(ADT7X10_MODE_MASK | ADT7X10_CT_POLARITY |
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index 27dc149a3ed9..4adc23ffaf72 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -32,7 +32,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
#define REG_PRODUCT_ID 0xfd
#define REG_MFG_ID 0xfe
-/* equation 4 from datasheet: rpm = (3932160 * multipler) / count */
+/* equation 4 from datasheet: rpm = (3932160 * multiplier) / count */
#define FAN_RPM_FACTOR 3932160
/*
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index c56e164d61c1..27ef127ccc2c 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1445,7 +1445,7 @@ static void lm85_init_client(struct i2c_client *client)
static int lm85_is_fake(struct i2c_client *client)
{
/*
- * Differenciate between real LM96000 and Winbond WPCD377I. The latter
+ * Differentiate between real LM96000 and Winbond WPCD377I. The latter
* emulate the former except that it has no hardware monitoring function
* so the readings are always 0.
*/
diff --git a/drivers/hwmon/pmbus/mp2888.c b/drivers/hwmon/pmbus/mp2888.c
index c5f35daa3fe1..7a2ecffba960 100644
--- a/drivers/hwmon/pmbus/mp2888.c
+++ b/drivers/hwmon/pmbus/mp2888.c
@@ -272,14 +272,14 @@ static int mp2888_write_word_data(struct i2c_client *client, int page, int reg,
word = clamp_val(word, 0, GENMASK(7, 0));
break;
case PMBUS_IOUT_OC_WARN_LIMIT:
- /* Fix limit according to total curent resolution. */
+ /* Fix limit according to total current resolution. */
word = data->total_curr_resolution ? DIV_ROUND_CLOSEST(word, 8) :
DIV_ROUND_CLOSEST(word, 4);
/* Drop unused bits 15:10. */
word = clamp_val(word, 0, GENMASK(9, 0));
break;
case PMBUS_POUT_OP_WARN_LIMIT:
- /* Fix limit according to total curent resolution. */
+ /* Fix limit according to total current resolution. */
word = data->total_curr_resolution ? DIV_ROUND_CLOSEST(word, 4) :
DIV_ROUND_CLOSEST(word, 2);
/* Drop unused bits 15:10. */
--
2.48.1
reply other threads:[~2026-09-04 11:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260904114249.26515-1-hemanth.selam@gmail.com \
--to=hemanth.selam@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=hansg@kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=steve.glendinning@shawell.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®