[PATCH] riscv: dts: microchip: beaglev-fire: remove double definition of gpio interrupts

[Conor Dooley <conor@kernel.org>]

From: Conor Dooley <conor.dooley@microchip.com>

When the irq-mux and its interrupt-map were added to the mpfs
devicetree, the gpio interrupts became fixed at the SoC level rather
than dependant on the design - the interrupt-map is now what varies.
The beaglev-fire should have had its dts copy of the interrupts removed
but did not. As a result, the mcp3564 driver does not probe, because
even though it doesn't use the interrupt at present, the SPI core still
looks it up. This lookup fails because the second copy of the interrupts
property doesn't resolve to something valid when passed via the
interrupt-map. Remove the second/incorrect set of interrupts properties.

Fixes: b0258f69f1e0 ("riscv: dts: microchip: update mpfs gpio interrupts to better match the SoC")
CC: stable@vger.kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---

CC: Conor Dooley <conor.dooley@microchip.com>
CC: Daire McNamara <daire.mcnamara@microchip.com>
CC: Rob Herring <robh@kernel.org>
CC: Krzysztof Kozlowski <krzk+dt@kernel.org>
CC: linux-riscv@lists.infradead.org
CC: devicetree@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: Valentina.FernandezAlanis@microchip.com

 .../boot/dts/microchip/mpfs-beaglev-fire.dts   | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
index 6d7037c9528d..a09371d9d064 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
@@ -90,10 +90,6 @@ regulator-1v8-syzygy {
 };
 
 &gpio0 {
-	interrupts = <13>, <14>, <15>, <16>,
-		     <17>, <18>, <19>, <20>,
-		     <21>, <22>, <23>, <24>,
-		     <25>, <26>;
 	ngpios = <14>;
 	gpio-line-names = "", "", "", "", "", "", "",
 			  "", "", "", "", "", "SD_CARD_CS", "USER_BUTTON";
@@ -101,12 +97,6 @@ &gpio0 {
 };
 
 &gpio1 {
-	interrupts = <27>, <28>, <29>, <30>,
-		     <31>, <32>, <33>, <34>,
-		     <35>, <36>, <37>, <38>,
-		     <39>, <40>, <41>, <42>,
-		     <43>, <44>, <45>, <46>,
-		     <47>, <48>, <49>, <50>;
 	ngpios = <24>;
 	gpio-line-names = "", "", "", "", "", "", "", "", "", "",
 			  "", "", "", "", "", "", "", "", "", "",
@@ -115,14 +105,6 @@ &gpio1 {
 };
 
 &gpio2 {
-	interrupts = <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>;
 	ngpios = <32>;
 	gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2",
 			  "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5",
-- 
2.53.0