[PATCH] mmc: fix typos in comments

[Hemanth Selam <hemanth.selam@gmail.com>]

Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt.  Only touches comments, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
 drivers/memstick/core/ms_block.c  | 2 +-
 drivers/memstick/host/r592.c      | 2 +-
 drivers/mmc/core/block.c          | 2 +-
 drivers/mmc/core/core.c           | 2 +-
 drivers/mmc/core/mmc.c            | 2 +-
 drivers/mmc/host/bcm2835.c        | 2 +-
 drivers/mmc/host/dw_mmc.h         | 2 +-
 drivers/mmc/host/mvsdio.c         | 2 +-
 drivers/mmc/host/sdhci-msm.c      | 2 +-
 drivers/mmc/host/sdhci-of-esdhc.c | 2 +-
 drivers/mmc/host/sdhci-omap.c     | 2 +-
 drivers/mmc/host/sdhci.h          | 2 +-
 12 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/memstick/core/ms_block.c b/drivers/memstick/core/ms_block.c
index ce33907bfc24..e2bf563ccbe1 100644
--- a/drivers/memstick/core/ms_block.c
+++ b/drivers/memstick/core/ms_block.c
@@ -720,7 +720,7 @@ static int h_msb_parallel_switch(struct memstick_dev *card,
 
 static int msb_switch_to_parallel(struct msb_data *msb);
 
-/* Reset the card, to guard against hw errors beeing treated as bad blocks */
+/* Reset the card, to guard against hw errors being treated as bad blocks */
 static int msb_reset(struct msb_data *msb, bool full)
 {
 
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c
index 605b2265536f..dc3de63901be 100644
--- a/drivers/memstick/host/r592.c
+++ b/drivers/memstick/host/r592.c
@@ -289,7 +289,7 @@ static int r592_transfer_fifo_dma(struct r592_device *dev)
 	dev->dma_error = 0;
 	reinit_completion(&dev->dma_done);
 
-	/* TODO: hidden assumption about nenth beeing always 1 */
+	/* TODO: hidden assumption about nenth being always 1 */
 	sg_count = dma_map_sg(&dev->pci_dev->dev, &dev->req->sg, 1, is_write ?
 			      DMA_TO_DEVICE : DMA_FROM_DEVICE);
 
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index e760d13ee325..a02bb2fee874 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -86,7 +86,7 @@ MODULE_ALIAS("mmc:block");
 static DEFINE_MUTEX(block_mutex);
 
 /*
- * The defaults come from config options but can be overriden by module
+ * The defaults come from config options but can be overridden by module
  * or bootarg options.
  */
 static int perdev_minors = CONFIG_MMC_BLOCK_MINORS;
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 29e80e5f928e..08d41f0996de 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2004,7 +2004,7 @@ unsigned int mmc_calc_max_discard(struct mmc_card *card)
 
 	/*
 	 * Without erase_group_def set, MMC erase timeout depends on clock
-	 * frequence which can change.  In that case, the best choice is
+	 * frequency which can change.  In that case, the best choice is
 	 * just the preferred erase size.
 	 */
 	if (mmc_card_mmc(card) && !(card->ext_csd.erase_group_def & 1))
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 05444ecf3909..a02b04938e1a 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1015,7 +1015,7 @@ static void mmc_set_bus_speed(struct mmc_card *card)
 }
 
 /*
- * Select the bus width amoung 4-bit and 8-bit(SDR).
+ * Select the bus width among 4-bit and 8-bit(SDR).
  * If the bus width is changed successfully, return the selected width value.
  * Zero is returned instead of error value if the wide width is not supported.
  */
diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index c949a3eaae79..efd1903c3ccd 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -1095,7 +1095,7 @@ static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
 	int div;
 
 	/* The SDCDIV register has 11 bits, and holds (div - 2).  But
-	 * in data mode the max is 50MHz wihout a minimum, and only
+	 * in data mode the max is 50MHz without a minimum, and only
 	 * the bottom 3 bits are used. Since the switch over is
 	 * automatic (unless we have marked the card as slow...),
 	 * chosen values have to make sense in both modes.  Ident mode
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 38610c89d54a..d500a419e2cf 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -69,7 +69,7 @@ struct dw_mci_dma_slave {
  * @cmd: The command currently being sent to the card, or NULL.
  * @data: The data currently being transferred, or NULL if no data
  *	transfer is in progress.
- * @stop_abort: The command currently prepared for stoping transfer.
+ * @stop_abort: The command currently prepared for stopping transfer.
  * @prev_blksz: The former transfer blksz record.
  * @timing: Record of current ios timing.
  * @use_dma: Which DMA channel is in use for the current transfer, zero
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index cf705b265e21..7d86426c6001 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -717,7 +717,7 @@ static int mvsd_probe(struct platform_device *pdev)
 	/*
 	 * Some non-DT platforms do not pass a clock, and the clock
 	 * frequency is passed through platform_data. On DT platforms,
-	 * a clock must always be passed, even if there is no gatable
+	 * a clock must always be passed, even if there is no gateable
 	 * clock associated to the SDIO interface (it can simply be a
 	 * fixed rate clock).
 	 */
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 4aff965f0e2e..b229545d9db5 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1770,7 +1770,7 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq)
 
 	/*
 	 * The driver has to acknowledge the interrupt, switch voltages and
-	 * report back if it succeded or not to this register. The voltage
+	 * report back if it succeeded or not to this register. The voltage
 	 * switches are handled by the sdhci core, so just report success.
 	 */
 	msm_host_writel(msm_host, irq_ack, host,
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 8345e2c5a034..1ca3562d8f73 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -1381,7 +1381,7 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
 	if (!IS_ERR(clk)) {
 		/*
 		 * esdhc->peripheral_clock would be assigned with a value
-		 * which is eSDHC base clock when use periperal clock.
+		 * which is eSDHC base clock when use peripheral clock.
 		 * For some platforms, the clock value got by common clk
 		 * API is peripheral clock while the eSDHC base clock is
 		 * 1/2 peripheral clock.
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index b5d7c1a80a92..7a198fb26628 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -332,7 +332,7 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	u32 reg;
 	int i;
 
-	/* clock tuning is not needed for upto 52MHz */
+	/* clock tuning is not needed for up to 52MHz */
 	if (ios->clock <= 52000000)
 		return 0;
 
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index f0fd81409a86..98c1fe20bfcd 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -409,7 +409,7 @@ struct sdhci_adma2_64_desc {
 #define SDHCI_MAX_MRQS		2
 
 /*
- * 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms.
+ * 48bit command and 136 bit response in 100KHz clock could take up to 2.48ms.
  * However since the start time of the command, the time between
  * command and response, and the time between response and start of data is
  * not known, set the command transfer time to 10ms.
-- 
2.48.1