mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Liu Chao <liuc63@xiaopeng.com>
To: Robin van der Gracht <robin@protonic.nl>,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Cc: kernel@pengutronix.de, linux-can@vger.kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	stable@kernel.org, Liu Chao <liuc63@xiaopeng.com>
Subject: [PATCH 2/2] can: j1939: check received packet count before completing session
Date: Mon,  7 Sep 2026 22:56:39 +0800	[thread overview]
Message-ID: <20260907145640.1106170-3-liuc63@xiaopeng.com> (raw)
In-Reply-To: <20260907145640.1106170-1-liuc63@xiaopeng.com>

j1939_xtp_rx_eoma_one() marks a session complete as soon as it sees
an EOMA without verifying that all data packets arrived.  Add a pkt.rx
check so a session with missing packets gets aborted instead of
delivering a short message to userspace.

Also tighten the existing EOMA size-mismatch warning to actually abort
for receive sessions instead of just logging.

Only unicast receive sessions are gated:

 - Transmitter sessions track pkt.rx via loopback confirmations which
   may legitimately lag behind the real transmit count, so the check
   would cause false aborts on the tx path.

 - BAM (broadcast) sessions never go through EOMA -- they complete via
   the final flag in j1939_xtp_rx_dat_one() when pkt.rx reaches
   pkt.total directly.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: stable@kernel.org
Signed-off-by: Liu Chao <liuc63@xiaopeng.com>
---
 net/can/j1939/transport.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 8fdce5792..2ecce49ad 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1397,6 +1397,7 @@ j1939_xtp_rx_eoma_one(struct j1939_session *session, struct sk_buff *skb)
 {
 	struct j1939_sk_buff_cb *skcb = j1939_skb_to_cb(skb);
 	const u8 *dat;
+	unsigned int expected_total;
 	int len;
 
 	if (j1939_xtp_rx_cmd_bad_pgn(session, skb))
@@ -1409,11 +1410,23 @@ j1939_xtp_rx_eoma_one(struct j1939_session *session, struct sk_buff *skb)
 	else
 		len = j1939_tp_ctl_to_size(dat);
 
-	if (session->total_message_size != len) {
+	if (!session->transmission && session->total_message_size != len) {
 		netdev_warn_once(session->priv->ndev,
-				 "%s: 0x%p: Incorrect size. Expected: %i; got: %i.\n",
+				 "%s: 0x%p: EOMA size mismatch, expected %i got %i\n",
 				 __func__, session, session->total_message_size,
 				 len);
+		goto out_session_cancel;
+	}
+
+	if (!session->transmission) {
+		expected_total = (session->total_message_size + 6) / 7;
+		if (session->pkt.rx < expected_total) {
+			netdev_warn(session->priv->ndev,
+				    "%s: 0x%p: EOMA but only %u/%u data packets rx'd\n",
+				    __func__, session,
+				    session->pkt.rx, expected_total);
+			goto out_session_cancel;
+		}
 	}
 
 	netdev_dbg(session->priv->ndev, "%s: 0x%p\n", __func__, session);
@@ -1422,6 +1435,11 @@ j1939_xtp_rx_eoma_one(struct j1939_session *session, struct sk_buff *skb)
 	j1939_session_timers_cancel(session);
 	/* transmitted without problems */
 	j1939_session_completed(session);
+	return;
+
+out_session_cancel:
+	j1939_session_timers_cancel(session);
+	j1939_session_cancel(session, J1939_XTP_ABORT_FAULT);
 }
 
 static void
-- 
2.50.1


  parent reply	other threads:[~2026-09-07 14:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-07 14:56 [PATCH 0/2] can: j1939: tighten TP receive-path checks Liu Chao
2026-09-07 14:56 ` [PATCH 1/2] can: j1939: reject TP RTS with wrong packet count Liu Chao
2026-09-07 14:56 ` Liu Chao [this message]
     [not found] <20260908145715.D70BD1F00A3D@smtp.kernel.org>
2026-09-09 18:05 ` [PATCH 2/2] can: j1939: check received packet count before completing session Liu Chao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260907145640.1106170-3-liuc63@xiaopeng.com \
    --to=liuc63@xiaopeng.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=robin@protonic.nl \
    --cc=socketcan@hartkopp.net \
    --cc=stable@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®