[PATCH net-next v3 10/10] net: dec: fix typos in comments

[Hemanth Selam <hemanth.selam@gmail.com>]

Fix misspellings in comments, found with scripts/checkpatch.pl using
the misspelling list in scripts/spelling.txt.  Comments only, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
 drivers/net/ethernet/dec/tulip/de2104x.c     | 2 +-
 drivers/net/ethernet/dec/tulip/interrupt.c   | 4 ++--
 drivers/net/ethernet/dec/tulip/media.c       | 2 +-
 drivers/net/ethernet/dec/tulip/tulip.h       | 4 ++--
 drivers/net/ethernet/dec/tulip/winbond-840.c | 2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
index f38a10c79907..fa52e099409c 100644
--- a/drivers/net/ethernet/dec/tulip/de2104x.c
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c
@@ -373,7 +373,7 @@ static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
 		  rx_tail, status, len);
 
 	if ((status & 0x38000300) != 0x0300) {
-		/* Ingore earlier buffers. */
+		/* Ignore earlier buffers. */
 		if ((status & 0xffff) != 0x7fff) {
 			netif_warn(de, rx_err, de->dev,
 				   "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c
index 0a12cb9b3ba7..8c02771b28e4 100644
--- a/drivers/net/ethernet/dec/tulip/interrupt.c
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
@@ -177,7 +177,7 @@ int tulip_poll(struct napi_struct *napi, int budget)
 			   pkt_len > 1518) {
 			       if ((status & (RxLengthOver2047 |
 					      RxWholePkt)) != RxWholePkt) {
-                                /* Ingore earlier buffers. */
+                                /* Ignore earlier buffers. */
                                        if ((status & 0xffff) != 0x7fff) {
                                                if (tulip_debug > 1)
                                                        dev_warn(&dev->dev,
@@ -408,7 +408,7 @@ static int tulip_rx(struct net_device *dev)
 		    pkt_len > 1518) {
 			if ((status & (RxLengthOver2047 |
 			     RxWholePkt))         != RxWholePkt) {
-				/* Ingore earlier buffers. */
+				/* Ignore earlier buffers. */
 				if ((status & 0xffff) != 0x7fff) {
 					if (tulip_debug > 1)
 						netdev_warn(dev,
diff --git a/drivers/net/ethernet/dec/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c
index 55d6fc99f40b..0c9694d2b38a 100644
--- a/drivers/net/ethernet/dec/tulip/media.c
+++ b/drivers/net/ethernet/dec/tulip/media.c
@@ -24,7 +24,7 @@
 
 /* Read and write the MII registers using software-generated serial
    MDIO protocol.  It is just different enough from the EEPROM protocol
-   to not share code.  The maxium data clock rate is 2.5 Mhz. */
+   to not share code.  The maximum data clock rate is 2.5 Mhz. */
 #define MDIO_SHIFT_CLK		0x10000
 #define MDIO_DATA_WRITE0	0x00000
 #define MDIO_DATA_WRITE1	0x20000
diff --git a/drivers/net/ethernet/dec/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h
index 5e010e1fa6f7..e39e5c78d4cc 100644
--- a/drivers/net/ethernet/dec/tulip/tulip.h
+++ b/drivers/net/ethernet/dec/tulip/tulip.h
@@ -250,7 +250,7 @@ enum t21143_csr6_bits {
 	csr6_ttm = (1<<22),  /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */
 	csr6_sf = (1<<21),   /* Store and forward. If set ignores TR bits */
 	csr6_hbd = (1<<19),  /* Heart beat disable. Disables SQE function in 10baseT */
-	csr6_ps = (1<<18),   /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */
+	csr6_ps = (1<<18),   /* Port Select. 0 (default) = 10baseT, 1 = 100baseTX: can't be set */
 	csr6_ca = (1<<17),   /* Collision Offset Enable. If set uses special algorithm in low collision situations */
 	csr6_trh = (1<<15),  /* Transmit Threshold high bit */
 	csr6_trl = (1<<14),  /* Transmit Threshold low bit */
@@ -274,7 +274,7 @@ enum t21143_csr6_bits {
 	csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */
 	csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */
 	/* set both and you get (PHY) loopback */
-	csr6_fd = (1<<9),    /* Full duplex mode, disables hearbeat, no loopback */
+	csr6_fd = (1<<9),    /* Full duplex mode, disables heartbeat, no loopback */
 	csr6_pm = (1<<7),    /* Pass All Multicast */
 	csr6_pr = (1<<6),    /* Promiscuous mode */
 	csr6_sb = (1<<5),    /* Start(1)/Stop(0) backoff counter */
diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
index a5581f1d0141..be9199f55a8a 100644
--- a/drivers/net/ethernet/dec/tulip/winbond-840.c
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -1188,7 +1188,7 @@ static int netdev_rx(struct net_device *dev)
 			break;
 		if ((status & 0x38008300) != 0x0300) {
 			if ((status & 0x38000300) != 0x0300) {
-				/* Ingore earlier buffers. */
+				/* Ignore earlier buffers. */
 				if ((status & 0xffff) != 0x7fff) {
 					dev_warn(&dev->dev,
 						 "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n",
-- 
2.48.1