From: Tao Cui <cui.tao@linux.dev>
To: tj@kernel.org, josef@toxicopanda.com, axboe@kernel.dk
Cc: cgroups@vger.kernel.org, linux-block@vger.kernel.org,
linux-kernel@vger.kernel.org, bpf@vger.kernel.org,
andrii@kernel.org, ast@kernel.org, daniel@iogearbox.net,
linux-kselftest@vger.kernel.org, cui.tao@linux.dev,
Tao Cui <cuitao@kylinos.cn>
Subject: [RFC PATCH 7/8] selftests/bpf: add multi-stream sequentiality example model
Date: Tue, 8 Sep 2026 18:01:42 +0800 [thread overview]
Message-ID: <20260908100143.47598-8-cui.tao@linux.dev> (raw)
In-Reply-To: <20260908100143.47598-1-cui.tao@linux.dev>
From: Tao Cui <cuitao@kylinos.cn>
Add a second example cost model which replaces the builtin
single-cursor sequentiality heuristic with a per-cgroup table of
stream slots keyed by iocg_id: an IO is sequential iff its sector
matches the expected next sector of any tracked stream. Interleaved
sequential readers in one cgroup keep their own slots instead of
ping-ponging a single cursor, and random IO inside a hot window
rarely matches a moving expectation.
Measured (QEMU, virtio-blk with the HDD profile, 4k IOs, w=1000):
two sequential readers in one cgroup are priced 2064us/op by the
builtin model (judged random) and 23us/op by this model (judged
sequential), a throughput recovery from 7.2 to 511 MiB/s; random IO
inside an 8M window is priced 22.9us/op by builtin (undercharge) and
2643us/op by this model; single-stream sequential and whole-disk
random pricing are unchanged.
The runner reuses the switch helper from the first example model.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
---
.../selftests/bpf/prog_tests/iocost_model.c | 31 +++++
tools/testing/selftests/bpf/progs/iocost_ms.c | 122 ++++++++++++++++++
2 files changed, 153 insertions(+)
create mode 100644 tools/testing/selftests/bpf/progs/iocost_ms.c
diff --git a/tools/testing/selftests/bpf/prog_tests/iocost_model.c b/tools/testing/selftests/bpf/prog_tests/iocost_model.c
index 386026241d5b4..2c149f3cd243a 100644
--- a/tools/testing/selftests/bpf/prog_tests/iocost_model.c
+++ b/tools/testing/selftests/bpf/prog_tests/iocost_model.c
@@ -2,6 +2,7 @@
/* Copyright (c) 2026 Tao Cui */
#include <test_progs.h>
#include "iocost_model.skel.h"
+#include "iocost_ms.skel.h"
/*
* Switch a device to ctrl=bpf through io.cost.model and verify the
@@ -122,3 +123,33 @@ void serial_test_iocost_model(void)
iocost_model__destroy(skel);
}
+
+/*
+ * Same check for the multi-stream example model. Only one model can
+ * be registered at a time, so this test must run separately from
+ * test_iocost_model; both are serial.
+ */
+void serial_test_iocost_model_streams(void)
+{
+ struct iocost_ms *skel;
+ char *dev;
+ int err;
+
+ dev = getenv("IOCOST_TEST_DEV");
+ if (!dev || geteuid() != 0) {
+ test__skip();
+ return;
+ }
+ if (!ASSERT_TRUE(dev_has_iocost(), "iocost_mounted"))
+ return;
+
+ skel = iocost_ms__open_and_load();
+ if (!ASSERT_OK_PTR(skel, "skel_open_load"))
+ return;
+
+ err = iocost_ms__attach(skel);
+ if (ASSERT_OK(err, "attach"))
+ ASSERT_OK(switch_to_bpf(dev), "switch_and_readback");
+
+ iocost_ms__destroy(skel);
+}
diff --git a/tools/testing/selftests/bpf/progs/iocost_ms.c b/tools/testing/selftests/bpf/progs/iocost_ms.c
new file mode 100644
index 0000000000000..465fd5d5c62e0
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/iocost_ms.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2026 Tao Cui */
+/*
+ * Example multi-stream sequentiality detection cost model.
+ *
+ * The builtin model keeps a single cursor per cgroup, so two
+ * interleaved sequential readers in one cgroup are all priced random
+ * (measured 89x overcharge, 12.9x throughput collapse), while random
+ * IO inside a hot window smaller than the 16MB seek threshold is
+ * priced sequential (measured 107x undercharge). This model replaces
+ * the single cursor with a per-cgroup table of stream slots, keyed by
+ * the iocg_id argument: an IO is sequential iff its sector matches the
+ * expected next sector of any tracked stream. Interleaved streams
+ * keep their own slots, and windowed random IO rarely matches a
+ * moving expectation.
+ */
+#include "vmlinux.h"
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+
+/* VTIME_PER_SEC comes from vmlinux.h (a BTF enum constant) */
+#define IOC_PAGE_SIZE 4096
+#define IOCOST_COST_F_MERGE (1ULL << 0) /* not in BTF: a plain macro */
+
+/* DIV64_U64_ROUND_UP / DIV_ROUND_UP_ULL equivalents, folded at
+ * compile time */
+#define RU(x, y) ((x) / (y) + (((x) % (y)) ? 1 : 0))
+
+#define RBPS 174019176ULL
+#define RSEQIOPS 41708ULL
+#define RRANDIOPS 370ULL
+#define WBPS 178075866ULL
+#define WSEQIOPS 42705ULL
+#define WRANDIOPS 378ULL
+
+#define RPAGE (RU(VTIME_PER_SEC, RU(RBPS, IOC_PAGE_SIZE)))
+#define RSEQIO (RU(VTIME_PER_SEC, RSEQIOPS) - RPAGE)
+#define RRANDIO (RU(VTIME_PER_SEC, RRANDIOPS) - RPAGE)
+#define WPAGE (RU(VTIME_PER_SEC, RU(WBPS, IOC_PAGE_SIZE)))
+#define WSEQIO (RU(VTIME_PER_SEC, WSEQIOPS) - WPAGE)
+#define WRANDIO (RU(VTIME_PER_SEC, WRANDIOPS) - WPAGE)
+
+#define NSLOTS 4
+
+struct streams {
+ __u64 expected[NSLOTS]; /* next expected sector, per stream */
+ __u64 stamp[NSLOTS]; /* LRU stamp, 0 = empty */
+};
+
+struct {
+ __uint(type, BPF_MAP_TYPE_HASH);
+ __type(key, __u64);
+ __type(value, struct streams);
+ __uint(max_entries, 64);
+} stream_tab SEC(".maps");
+
+SEC("struct_ops")
+u64 BPF_PROG(iocost_ms_calc_cost, u64 op, u64 nbytes, u64 sector,
+ u64 cursor, u64 iocg_id, u64 flags)
+{
+ struct streams *s;
+ u64 page, seqio, randio, base, advance, now;
+ u32 i, victim = 0, found = 0xFFFFFFFF;
+
+ if (op != REQ_OP_READ && op != REQ_OP_WRITE)
+ return 0; /* delegate the rest to builtin */
+ if (!nbytes)
+ return 0;
+
+ if (op == REQ_OP_READ) {
+ page = RPAGE; seqio = RSEQIO; randio = RRANDIO;
+ } else {
+ page = WPAGE; seqio = WSEQIO; randio = WRANDIO;
+ }
+ advance = RU(nbytes, 512); /* sectors */
+
+ s = bpf_map_lookup_elem(&stream_tab, &iocg_id);
+ if (!s) {
+ struct streams zero = {};
+
+ bpf_map_update_elem(&stream_tab, &iocg_id, &zero,
+ BPF_NOEXIST);
+ s = bpf_map_lookup_elem(&stream_tab, &iocg_id);
+ if (!s)
+ return seqio + RU(nbytes, IOC_PAGE_SIZE) * page;
+ }
+
+ if (flags & IOCOST_COST_F_MERGE) {
+ base = 0;
+ goto out;
+ }
+
+ now = bpf_ktime_get_ns();
+ for (i = 0; i < NSLOTS; i++) {
+ if (s->expected[i] == sector && s->stamp[i]) {
+ found = i;
+ break;
+ }
+ }
+ if (found != 0xFFFFFFFF) {
+ base = seqio;
+ s->expected[found] = sector + advance;
+ s->stamp[found] = now;
+ } else {
+ base = randio;
+ for (i = 1; i < NSLOTS; i++) {
+ if (s->stamp[i] < s->stamp[victim])
+ victim = i;
+ }
+ s->expected[victim] = sector + advance;
+ s->stamp[victim] = now;
+ }
+out:
+ return base + RU(nbytes, IOC_PAGE_SIZE) * page;
+}
+
+SEC(".struct_ops")
+struct iocost_model_ops iocost_ms = {
+ .calc_cost = (void *)iocost_ms_calc_cost,
+};
+
+char LICENSE[] SEC("license") = "GPL";
--
2.43.0
next prev parent reply other threads:[~2026-09-08 10:03 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-08 10:01 [RFC PATCH 0/8] blk-iocost: BPF struct_ops cost model Tao Cui
2026-09-08 10:01 ` [RFC PATCH 1/8] blk-iocost: add iocost_ioc_tick tracepoint for per-period device summary Tao Cui
2026-09-08 10:01 ` [RFC PATCH 2/8] blk-iocost: define iocost_model_ops cost model interface Tao Cui
2026-09-08 20:31 ` Tejun Heo
2026-09-08 10:01 ` [RFC PATCH 3/8] blk-iocost: implement BPF struct_ops registration Tao Cui
2026-09-08 20:31 ` Tejun Heo
2026-09-08 10:01 ` [RFC PATCH 4/8] blk-iocost: dispatch cost calculation to registered BPF model Tao Cui
2026-09-08 20:31 ` Tejun Heo
2026-09-08 10:01 ` [RFC PATCH 5/8] blk-iocost: add ctrl=bpf per-device opt-in Tao Cui
2026-09-08 10:01 ` [RFC PATCH 6/8] selftests/bpf: add iocost cost model test Tao Cui
2026-09-08 20:31 ` Tejun Heo
2026-09-08 10:01 ` Tao Cui [this message]
2026-09-08 20:31 ` [RFC PATCH 7/8] selftests/bpf: add multi-stream sequentiality example model Tejun Heo
2026-09-08 10:01 ` [RFC PATCH 8/8] docs: cgroup-v2: document io.cost ctrl=bpf option Tao Cui
2026-09-08 20:31 ` [RFC PATCH 0/8] blk-iocost: BPF struct_ops cost model Tejun Heo
2026-09-09 13:12 ` Tao Cui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260908100143.47598-8-cui.tao@linux.dev \
--to=cui.tao@linux.dev \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=axboe@kernel.dk \
--cc=bpf@vger.kernel.org \
--cc=cgroups@vger.kernel.org \
--cc=cuitao@kylinos.cn \
--cc=daniel@iogearbox.net \
--cc=josef@toxicopanda.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®