mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Yang <mmyangfl@gmail.com>
To: netdev@vger.kernel.org
Cc: David Yang <mmyangfl@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next 2/7] net: dsa: motorcomm: Check port type with runtime info
Date: Thu, 10 Sep 2026 03:05:30 +0800	[thread overview]
Message-ID: <20260909190541.466476-3-mmyangfl@gmail.com> (raw)
In-Reply-To: <20260909190541.466476-1-mmyangfl@gmail.com>

The yt921x_port_is_internal/external() macros hardcoded the port layout:
they treat ports 8 and 9 as external on every chip and count the dummy
ports as internal. Drop them and identify the port type using chip info
and runtime configuration.

Signed-off-by: David Yang <mmyangfl@gmail.com>
---
 drivers/net/dsa/motorcomm/chip.c | 36 ++++++++++++++++++++++----------
 drivers/net/dsa/motorcomm/chip.h | 11 +++++-----
 2 files changed, 31 insertions(+), 16 deletions(-)

diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index 64fdc5109cc6..946949a3aba8 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -3743,6 +3743,7 @@ yt921x_dsa_port_set_apptrust(struct dsa_switch *ds, int port, const u8 *sel,
 
 static int yt921x_port_down(struct yt921x_priv *priv, int port)
 {
+	const struct yt921x_info *info = priv->info;
 	u32 mask;
 	int res;
 
@@ -3751,12 +3752,13 @@ static int yt921x_port_down(struct yt921x_priv *priv, int port)
 	if (res)
 		return res;
 
-	if (yt921x_port_is_external(port)) {
+	if (BIT(port) & info->serdes_mask) {
 		mask = YT921X_SERDES_LINK;
 		res = yt921x_reg_clear_bits(priv, YT921X_SERDESn(port), mask);
 		if (res)
 			return res;
-
+	}
+	if (BIT(port) & info->xmii_mask) {
 		mask = YT921X_XMII_LINK;
 		res = yt921x_reg_clear_bits(priv, YT921X_XMIIn(port), mask);
 		if (res)
@@ -3771,6 +3773,8 @@ yt921x_port_up(struct yt921x_priv *priv, int port, unsigned int mode,
 	       phy_interface_t interface, int speed, int duplex,
 	       bool tx_pause, bool rx_pause)
 {
+	const struct yt921x_info *info = priv->info;
+	struct yt921x_port *pp = &priv->ports[port];
 	u32 mask;
 	u32 ctrl;
 	int res;
@@ -3805,7 +3809,10 @@ yt921x_port_up(struct yt921x_priv *priv, int port, unsigned int mode,
 	if (res)
 		return res;
 
-	if (yt921x_port_is_external(port)) {
+	if (!(BIT(port) & (info->serdes_mask | info->xmii_mask)))
+		return 0;
+
+	if (pp->serdes) {
 		mask = YT921X_SERDES_SPEED_M;
 		switch (speed) {
 		case SPEED_10:
@@ -3841,7 +3848,7 @@ yt921x_port_up(struct yt921x_priv *priv, int port, unsigned int mode,
 					     mask, ctrl);
 		if (res)
 			return res;
-
+	} else {
 		mask = YT921X_XMII_LINK;
 		res = yt921x_reg_set_bits(priv, YT921X_XMIIn(port), mask);
 		if (res)
@@ -3881,17 +3888,16 @@ static int
 yt921x_port_config(struct yt921x_priv *priv, int port, unsigned int mode,
 		   phy_interface_t interface)
 {
+	const struct yt921x_info *info = priv->info;
+	struct yt921x_port *pp = &priv->ports[port];
 	struct device *dev = to_device(priv);
 	u32 mask;
 	u32 ctrl;
 	int res;
 
-	if (!yt921x_port_is_external(port)) {
-		if (interface != PHY_INTERFACE_MODE_INTERNAL) {
-			dev_err(dev, "Wrong mode %d on port %d\n",
-				interface, port);
-			return -EINVAL;
-		}
+	if (BIT(port) & info->internal_mask) {
+		if (interface != PHY_INTERFACE_MODE_INTERNAL)
+			goto err;
 		return 0;
 	}
 
@@ -3901,6 +3907,9 @@ yt921x_port_config(struct yt921x_priv *priv, int port, unsigned int mode,
 	case PHY_INTERFACE_MODE_100BASEX:
 	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_2500BASEX:
+		if (!(BIT(port) & info->serdes_mask))
+			goto err;
+
 		mask = YT921X_SERDES_CTRL_PORTn(port);
 		res = yt921x_reg_set_bits(priv, YT921X_SERDES_CTRL, mask);
 		if (res)
@@ -3933,13 +3942,18 @@ yt921x_port_config(struct yt921x_priv *priv, int port, unsigned int mode,
 		if (res)
 			return res;
 
+		pp->serdes = true;
 		break;
 	/* add XMII support here */
 	default:
-		return -EINVAL;
+		goto err;
 	}
 
 	return 0;
+
+err:
+	dev_err(dev, "Wrong mode %d on port %d\n", interface, port);
+	return -EINVAL;
 }
 
 static void
diff --git a/drivers/net/dsa/motorcomm/chip.h b/drivers/net/dsa/motorcomm/chip.h
index bc2641ded101..6f0123d219e0 100644
--- a/drivers/net/dsa/motorcomm/chip.h
+++ b/drivers/net/dsa/motorcomm/chip.h
@@ -858,9 +858,6 @@ enum yt921x_fdb_entry_status {
 
 #define YT921X_NAME	"yt921x"
 
-#define yt921x_port_is_internal(port) ((port) < 8)
-#define yt921x_port_is_external(port) ((port) == 8 || (port) == 9)
-
 struct yt921x_mib {
 	u64 rx_broadcast;
 	u64 rx_pause;
@@ -936,8 +933,12 @@ struct yt921x_acl_blk {
 struct yt921x_port {
 	unsigned char index;
 
-	bool hairpin;
-	bool isolated;
+	/* SerDes in use */
+	bool serdes:1;
+	/* BR_HAIRPIN_MODE */
+	bool hairpin:1;
+	/* BR_ISOLATED */
+	bool isolated:1;
 
 	struct delayed_work mib_read;
 	struct yt921x_mib mib;
-- 
2.53.0


  parent reply	other threads:[~2026-09-09 19:06 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-09 19:05 [PATCH net-next 0/7] net: dsa: motorcomm: Add SerDes PCS David Yang
2026-09-09 19:05 ` [PATCH net-next 1/7] net: dsa: motorcomm: Split xMII and SERDES port masks David Yang
2026-09-10 20:59   ` Andrew Lunn
2026-09-10 21:37     ` David Yang
2026-09-09 19:05 ` David Yang [this message]
2026-09-09 19:05 ` [PATCH net-next 3/7] net: dsa: motorcomm: Fix port control/status register bit field names David Yang
2026-09-09 19:05 ` [PATCH net-next 4/7] net: dsa: motorcomm: Introduce yt921x_speed David Yang
2026-09-09 19:05 ` [PATCH net-next 5/7] net: dsa: motorcomm: Hoist port_to_priv helper into chip.h David Yang
2026-09-09 19:05 ` [PATCH net-next 6/7] net: dsa: motorcomm: Split MDIO bus module David Yang
2026-09-09 19:05 ` [PATCH net-next 7/7] net: dsa: motorcomm: Add SerDes PCS David Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260909190541.466476-3-mmyangfl@gmail.com \
    --to=mmyangfl@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®