[PATCH v4 02/15] arm64: dts: ti: k3-am62l-evm: Remove unnecessary internal pullups for MMC0

[Judith Mendez <jm@ti.com>]

AM62L EVM has external pullups on MMC0 CMD and D0 pins [0]. Remove
internal pullups considering:
- Internal pullups are not required, without internal pullups, RDAT and
  RCMD values of 47K are within spec
- having both pullups (stronger pull) results in unnecessary power
  consumption

[0] https://www.ti.com/lit/zip/SPRCAL6

Fixes: 00fb4c73b67d ("arm64: dts: ti: k3-am62l: add initial reference board file")
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
index 84a0cfaaf196a..964387eb51788 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
@@ -253,9 +253,9 @@ AM62LX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D8) I2C2_SDA */
 
 	mmc0_pins_default: mmc0-default-pins {
 		pinctrl-single,pins = <
-			AM62LX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (D2) MMC0_CMD */
+			AM62LX_IOPAD(0x0214, PIN_INPUT, 0) /* (D2) MMC0_CMD */
 			AM62LX_IOPAD(0x020c, PIN_OUTPUT, 0) /* (B2) MMC0_CLK */
-			AM62LX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (D3) MMC0_DAT0 */
+			AM62LX_IOPAD(0x0208, PIN_INPUT, 0) /* (D3) MMC0_DAT0 */
 			AM62LX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (D4) MMC0_DAT1 */
 			AM62LX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (C1) MMC0_DAT2 */
 			AM62LX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (C2) MMC0_DAT3 */
-- 
2.34.1