From: Jakub Kicinski <kuba@kernel.org>
To: Long Li <longli@microsoft.com>
Cc: Konstantin Taranov <kotaranov@microsoft.com>,
"David S . Miller" <davem@davemloft.net>,
Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
Jason Gunthorpe <jgg@ziepe.ca>, Leon Romanovsky <leon@kernel.org>,
Haiyang Zhang <haiyangz@microsoft.com>,
"K . Y . Srinivasan" <kys@microsoft.com>,
Wei Liu <wei.liu@kernel.org>, Dexuan Cui <decui@microsoft.com>,
shradhagupta@linux.microsoft.com, Simon Horman <horms@kernel.org>,
ernis@linux.microsoft.com, stephen@networkplumber.org,
shirazsaleem@microsoft.com, netdev@vger.kernel.org,
linux-rdma@vger.kernel.org, linux-hyperv@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net] net: mana: do not discard an ethtool-configured RSS table on a queue rebuild
Date: Thu, 10 Sep 2026 08:18:14 -0700 [thread overview]
Message-ID: <20260910081814.1b5b7b36@kernel.org> (raw)
In-Reply-To: <20260905004401.3937066-1-longli@microsoft.com>
On Fri, 4 Sep 2026 17:44:01 -0700 Long Li wrote:
> mana_alloc_queues() regenerates the RSS indirection table from the driver
> default every time the queues are built, so a table installed with
> "ethtool -X" is silently replaced by any operation that rebuilds them:
> an MTU change, a ring-size, channel-count or private-flag change, an XDP
> attach, TX-timeout reset recovery, or resume.
>
> The driver never clears the core's IFF_RXFH_CONFIGURED, so
> netif_is_rxfh_configured() keeps reporting a user table while the
> hardware has been reprogrammed with the default one. "ethtool -x" then
> shows a table the user did not ask for, with no indication it changed:
>
> # ethtool -X ens1 equal 2
> # ethtool -x ens1
> RX flow hash indirection table for ens1 with 16 RX ring(s):
> 0: 0 1 0 1 0 1 0 1
> 8: 0 1 0 1 0 1 0 1
> # ip link set ens1 mtu 1400
> # ethtool -x ens1
> RX flow hash indirection table for ens1 with 16 RX ring(s):
> 0: 0 1 2 3 4 5 6 7
> 8: 8 9 10 11 12 13 14 15
>
> Keep the table instead, and rebuild it only when it is driver-generated
> or cannot be honoured. An entry may not be kept if it points past the
> last queue: mana_config_rss() uses these entries to index apc->rxqs[],
> which holds apc->num_queues pointers. That is reachable because
> mana_attach() calls mana_init_port(), which lowers apc->num_queues to the
> maximum the device reports, so a table configured for more queues can
> outlive them.
To be clear this is only acceptable if the number of queues drops due
to re-negotiation of caps with the device, not for example if XDP
requires some queues to be used for other purposes. In the latter case
just refuse the config change.
> A table that cannot be kept is still replaced by the default silently,
> without ethtool_rxfh_indir_lost(). That helper sends
> ETHTOOL_MSG_RSS_NTF, which requires the netdev instance lock, and
> mana_alloc_queues() runs both with that lock held, from ndo_open, and
> without it, from mana_attach() on the reset and resume paths. Leaving
> the core's view untouched is what the driver did for every table before
> this change.
Okay, so you have a problem of not having the lock...
> Opt the RSS ethtool operations into rtnl_lock() while here. Reading the
> table in mana_alloc_queues() has to be serialized against mana_set_rxfh()
> replacing it, and the two had no lock in common: mana_set_rxfh() ran under
> the netdev instance lock alone, while mana_alloc_queues() reaches this
> point holding only RTNL, from ndo_open and from mana_attach() on the reset
> and resume paths. Taking the instance lock there instead is not possible,
> since ndo_open already runs with it held. The same flag covers the netlink
> and ioctl entry points.
.. and yet your fix is not to try to take it but the reverse, to add
a different lock? You need to explain why reset path can't take the
instance lock. Of course you can't take it _inside_ ndo_open, but the
caller should be able to.
> Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
> Signed-off-by: Long Li <longli@microsoft.com>
> ---
> drivers/net/ethernet/microsoft/mana/mana_en.c | 37 ++++++++++++++++++-
> .../ethernet/microsoft/mana/mana_ethtool.c | 3 +-
> 2 files changed, 38 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c
> index 7a1ac853e3abcd28c4a1e5c6987ec631a18ad840..97386e17b9421aedefa25bab6fbf0b7b1f2996d4 100644
> --- a/drivers/net/ethernet/microsoft/mana/mana_en.c
> +++ b/drivers/net/ethernet/microsoft/mana/mana_en.c
> @@ -3306,6 +3306,28 @@ static void mana_rss_table_init(struct mana_port_context *apc)
> ethtool_rxfh_indir_default(i, apc->num_queues);
> }
>
> +/* Whether the current indirection table can be kept for apc->num_queues,
> + * rather than rebuilt from the driver default.
> + *
> + * Only a user table ("ethtool -X") is worth keeping; a driver-generated one
> + * is rebuilt so that it spreads over every queue. An entry pointing past the
> + * last queue cannot be kept: mana_config_rss() uses these entries to index
> + * apc->rxqs[], which holds apc->num_queues pointers.
> + */
> +static bool mana_rss_table_keep(struct mana_port_context *apc)
> +{
> + u32 i;
> +
> + if (!netif_is_rxfh_configured(apc->ndev))
> + return false;
> +
> + for (i = 0; i < apc->indir_table_sz; i++)
> + if (apc->indir_table[i] >= apc->num_queues)
> + return false;
> +
> + return true;
> +}
> +
> int mana_disable_vport_rx(struct mana_port_context *apc)
> {
> return mana_cfg_vport_steering(apc, TRI_STATE_FALSE, false, false,
> @@ -3621,7 +3643,20 @@ int mana_alloc_queues(struct net_device *ndev)
> goto destroy_rxq;
> }
>
> - mana_rss_table_init(apc);
> + /* Keep a user-configured table across the rebuild: its entries are
> + * queue indices and stay meaningful while they are all still in range.
> + * Only a driver-generated table is regenerated here.
> + *
> + * A table that cannot be kept is replaced by the default without
> + * telling the core, which keeps reporting the table as user
> + * configured. That is what this function did for every table before,
> + * and reporting it here is not an option: ethtool_rxfh_indir_lost()
> + * sends ETHTOOL_MSG_RSS_NTF, which requires the netdev instance lock,
> + * and this runs both with that lock held (ndo_open) and without it
> + * (mana_attach() from the reset and resume paths).
> + */
> + if (!mana_rss_table_keep(apc))
> + mana_rss_table_init(apc);
>
> err = mana_config_rss(apc, TRI_STATE_TRUE, true, true);
> if (err) {
> diff --git a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
> index ece7ff9cc409a806b6a6de70a85b44874bfa6dad..e3acaf17efabcd62f7cffabdb8404cf16b917272 100644
> --- a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
> +++ b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
> @@ -871,7 +871,8 @@ const struct ethtool_ops mana_ethtool_ops = {
> .op_needs_rtnl = ETHTOOL_OP_NEEDS_RTNL_SCHANNELS |
> ETHTOOL_OP_NEEDS_RTNL_SRINGPARAM |
> ETHTOOL_OP_NEEDS_RTNL_SPFLAGS |
> - ETHTOOL_OP_NEEDS_RTNL_GLINK,
> + ETHTOOL_OP_NEEDS_RTNL_GLINK |
> + ETHTOOL_OP_NEEDS_RTNL_RSS,
> .get_ethtool_stats = mana_get_ethtool_stats,
> .get_sset_count = mana_get_sset_count,
> .get_strings = mana_get_strings,
next prev parent reply other threads:[~2026-09-10 15:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-05 0:44 Long Li
2026-09-10 12:46 ` netdev-bot+sashiko
2026-09-10 15:18 ` Jakub Kicinski [this message]
2026-09-10 20:00 ` [EXTERNAL] " Long Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910081814.1b5b7b36@kernel.org \
--to=kuba@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=decui@microsoft.com \
--cc=edumazet@google.com \
--cc=ernis@linux.microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=horms@kernel.org \
--cc=jgg@ziepe.ca \
--cc=kotaranov@microsoft.com \
--cc=kys@microsoft.com \
--cc=leon@kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=longli@microsoft.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shirazsaleem@microsoft.com \
--cc=shradhagupta@linux.microsoft.com \
--cc=stephen@networkplumber.org \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®