mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Matt Evans <matt@ozlabs.org>
To: "Alex Williamson" <alex@shazbot.org>,
	"Leon Romanovsky" <leon@kernel.org>,
	"Jason Gunthorpe" <jgg@nvidia.com>,
	"Alex Mastro" <amastro@fb.com>,
	"Christian König" <christian.koenig@amd.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Logan Gunthorpe" <logang@deltatee.com>,
	"Kevin Tian" <kevin.tian@intel.com>,
	"Pranjal Shrivastava" <praan@google.com>,
	"Longfang Liu" <liulongfang@huawei.com>
Cc: "Mahmoud Adam" <mngyadam@amazon.de>,
	"David Matlack" <dmatlack@google.com>,
	"Björn Töpel" <bjorn@kernel.org>,
	"Sumit Semwal" <sumit.semwal@linaro.org>,
	"Ankit Agrawal" <ankita@nvidia.com>,
	"Alistair Popple" <apopple@nvidia.com>,
	"Vivek Kasireddy" <vivek.kasireddy@intel.com>,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linaro-mm-sig@lists.linaro.org,
	kvm@vger.kernel.org, linux-pci@vger.kernel.org
Subject: [PATCH v6 4/9] vfio/pci: Add a helper to look up PFNs for DMABUFs
Date: Fri, 11 Sep 2026 22:41:52 +0100	[thread overview]
Message-ID: <20260911214200.33793-5-matt@ozlabs.org> (raw)
In-Reply-To: <20260911214200.33793-1-matt@ozlabs.org>

Add vfio_pci_dma_buf_find_pfn(), which a VMA fault handler can use to
find a PFN.

This supports multi-range DMABUFs, which typically would be used to
represent scattered spans but might even represent overlapping or
aliasing spans of PFNs.

Because this is intended to be used in vfio_pci_core.c, we also need
to expose the struct vfio_pci_dma_buf in the vfio_pci_priv.h header.

This move also adds a new member, vma_pgoff_adjust; this is consumed
by vfio_pci_dma_buf_find_pfn(), but will be set in a future commit.
Add it now to reduce the number of functions touched by later commits.

Signed-off-by: Matt Evans <matt@ozlabs.org>
---
 drivers/vfio/pci/vfio_pci_dmabuf.c | 166 ++++++++++++++++++++++++++---
 drivers/vfio/pci/vfio_pci_priv.h   |  21 ++++
 2 files changed, 174 insertions(+), 13 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci_dmabuf.c b/drivers/vfio/pci/vfio_pci_dmabuf.c
index 847ee5cc78e7..9f10b10fc436 100644
--- a/drivers/vfio/pci/vfio_pci_dmabuf.c
+++ b/drivers/vfio/pci/vfio_pci_dmabuf.c
@@ -9,19 +9,6 @@
 
 MODULE_IMPORT_NS("DMA_BUF");
 
-struct vfio_pci_dma_buf {
-	struct dma_buf *dmabuf;
-	struct vfio_pci_core_device *vdev;
-	struct list_head dmabufs_elm;
-	size_t size;
-	struct phys_vec *phys_vec;
-	struct p2pdma_provider *provider;
-	u32 nr_ranges;
-	struct kref kref;
-	struct completion comp;
-	u8 revoked : 1;
-};
-
 static int vfio_pci_dma_buf_attach(struct dma_buf *dmabuf,
 				   struct dma_buf_attachment *attachment)
 {
@@ -106,6 +93,159 @@ static const struct dma_buf_ops vfio_pci_dmabuf_ops = {
 	.release = vfio_pci_dma_buf_release,
 };
 
+int vfio_pci_dma_buf_find_pfn(struct vfio_pci_core_device *vdev,
+			      struct vfio_pci_dma_buf *priv,
+			      struct vm_area_struct *vma,
+			      unsigned long fault_addr,
+			      unsigned int order,
+			      unsigned long *out_pfn)
+{
+	/*
+	 * Given a VMA (start, end, pgoffs) and a fault address,
+	 * search the corresponding DMABUF's phys_vec[] to find the
+	 * range representing the address's offset into the VMA, and
+	 * its PFN.  vdev must be the device that the DMABUF priv was
+	 * exported from; vdev->dmabuf_lock must be held, and priv
+	 * must not be revoked.
+	 *
+	 * The phys_vec[] ranges represent contiguous spans of VAs
+	 * upwards from the buffer offset 0; the actual PFNs might be
+	 * in any order, overlap/alias, etc.  Calculate an offset of
+	 * the desired page given VMA start/pgoff and address, then
+	 * search upwards from 0 to find which span contains it.
+	 *
+	 * On success, a valid PFN for a page sized by 'order' is
+	 * returned into out_pfn.
+	 *
+	 * Failure occurs if:
+	 * - A hugepage would cross the edge of the VMA,
+	 * - A hugepage isn't entirely contained within a range
+	 *   (including where it straddles the boundary between
+	 *   ranges),
+	 * - We find a range, but the final PFN isn't aligned to the
+	 *   requested order.
+	 *
+	 * Upon failure, -ERANGE is returned and the caller is
+	 * expected to try again with a smaller order, which will
+	 * eventually succeed.
+	 *
+	 * It's suboptimal if DMABUFs are created with neighbouring
+	 * ranges that are physically contiguous, since hugepages
+	 * can't straddle range boundaries.  (The construction of the
+	 * ranges should merge them in this case.)
+	 *
+	 * Finally, vma_pgoff_adjust is used with a DMABUF created for
+	 * a VFIO BAR mmap: a BAR mapped with vm_pgoff > 0 creates a
+	 * DMABUF such that byte 0 of the VMA corresponds to byte 0 of
+	 * the DMABUF and byte 'vm_pgoff << PAGE_SHIFT' into the BAR.
+	 * To avoid double-offsetting in this scenario, subtracting
+	 * vma_pgoff_adjust from this (non-zero) vm_pgoff generates
+	 * the effective offset.  This also removes the VFIO region
+	 * index encoded in vm_pgoff for VFIO BAR mmaps.
+	 */
+
+	const unsigned long pagesize = PAGE_SIZE << order;
+	unsigned long vma_off = (vma->vm_pgoff - priv->vma_pgoff_adjust) <<
+				 PAGE_SHIFT;
+	unsigned long rounded_page_addr = ALIGN_DOWN(fault_addr, pagesize);
+	unsigned long rounded_page_end = rounded_page_addr + pagesize;
+	unsigned long fault_offset;
+	unsigned long fault_offset_end;
+	unsigned long range_start_offset = 0;
+	unsigned int i;
+	int ret;
+
+	if (unlikely(!vdev))
+		return -ENODEV;
+
+	/* This prevents the dmabuf revocation state from changing under us */
+	lockdep_assert_held(&vdev->dmabuf_lock);
+
+	if (unlikely(priv->vdev != vdev || priv->revoked))
+		return -ENODEV;
+
+	if (rounded_page_addr < vma->vm_start || rounded_page_end > vma->vm_end) {
+		if (order > 0)
+			return -ERANGE;
+
+		/* A fault address outside of the VMA is absurd. */
+		dev_warn_ratelimited(
+			&vdev->pdev->dev,
+			"Fault addr 0x%lx outside VMA 0x%lx-0x%lx\n",
+			fault_addr, vma->vm_start, vma->vm_end);
+		return -EFAULT;
+	}
+
+	/*
+	 * fault_offset[_end] is the span within the DMABUF
+	 * corresponding to the faulting page:
+	 */
+	if (unlikely(check_add_overflow(rounded_page_addr - vma->vm_start,
+					vma_off, &fault_offset) ||
+		     check_add_overflow(fault_offset, pagesize,
+					&fault_offset_end)))
+		return -EFAULT;
+
+	/*
+	 * Iterate over ranges in the buffer, summing their lengths:
+	 * range_start_offset represents the current range's starting
+	 * offset in the buffer (from 0 upwards).
+	 *
+	 * A failure for order == 0 is unexpected, and triggers a
+	 * fault/warn.
+	 */
+	ret = (order == 0) ? -EFAULT : -ERANGE;
+
+	for (i = 0; i < priv->nr_ranges; i++) {
+		size_t range_len = priv->phys_vec[i].len;
+
+		/* Early exit if range starts after the page end */
+		if (fault_offset_end <= range_start_offset)
+			break;
+
+		if (fault_offset >= range_start_offset &&
+		    fault_offset_end <= range_start_offset + range_len) {
+			/*
+			 * The faulting page is wholly contained
+			 * within the span represented by this range,
+			 * so validate PFN alignment for the order.
+			 * The if() condition ensures the pfn
+			 * arithmetic won't overflow.
+			 */
+			unsigned long pfn =
+				((fault_offset - range_start_offset) +
+				 priv->phys_vec[i].paddr) >> PAGE_SHIFT;
+
+			if (IS_ALIGNED(pfn, 1 << order)) {
+				*out_pfn = pfn;
+				ret = 0;
+			}
+			/*
+			 * Else order > 0; ERANGE retries with smaller
+			 * order
+			 */
+			break;
+		}
+		range_start_offset += range_len;
+	}
+
+	if (order == 0 && ret != 0)
+		/*
+		 * The address fell outside of the span represented by
+		 * the (concatenated) ranges.  As setup of a mapping
+		 * ensures that the VMA is <= the total size of the
+		 * ranges this should never happen.  If it does, warn
+		 * and SIGBUS.
+		 */
+		dev_warn_ratelimited(
+			&vdev->pdev->dev,
+			"No range for addr 0x%lx, order %d: VMA 0x%lx-0x%lx pgoff 0x%lx, %u ranges, size 0x%zx\n",
+			fault_addr, order, vma->vm_start, vma->vm_end,
+			vma->vm_pgoff, priv->nr_ranges, priv->size);
+
+	return ret;
+}
+
 /*
  * This is a temporary "private interconnect" between VFIO DMABUF and iommufd.
  * It allows the two co-operating drivers to exchange the physical address of
diff --git a/drivers/vfio/pci/vfio_pci_priv.h b/drivers/vfio/pci/vfio_pci_priv.h
index fca9d0dfac90..48d9f574a3df 100644
--- a/drivers/vfio/pci/vfio_pci_priv.h
+++ b/drivers/vfio/pci/vfio_pci_priv.h
@@ -23,6 +23,20 @@ struct vfio_pci_ioeventfd {
 	bool			test_mem;
 };
 
+struct vfio_pci_dma_buf {
+	struct dma_buf *dmabuf;
+	struct vfio_pci_core_device *vdev;
+	struct list_head dmabufs_elm;
+	size_t size;
+	struct phys_vec *phys_vec;
+	struct p2pdma_provider *provider;
+	u32 nr_ranges;
+	struct kref kref;
+	struct completion comp;
+	unsigned long vma_pgoff_adjust;
+	u8 revoked : 1;
+};
+
 bool vfio_pci_intx_mask(struct vfio_pci_core_device *vdev);
 void vfio_pci_intx_unmask(struct vfio_pci_core_device *vdev);
 
@@ -114,6 +128,13 @@ static inline bool vfio_pci_is_vga(struct pci_dev *pdev)
 	return (pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA;
 }
 
+int vfio_pci_dma_buf_find_pfn(struct vfio_pci_core_device *vdev,
+			      struct vfio_pci_dma_buf *priv,
+			      struct vm_area_struct *vma,
+			      unsigned long address,
+			      unsigned int order,
+			      unsigned long *out_pfn);
+
 #ifdef CONFIG_VFIO_PCI_DMABUF
 int vfio_pci_core_feature_dma_buf(struct vfio_pci_core_device *vdev, u32 flags,
 				  struct vfio_device_feature_dma_buf __user *arg,
-- 
2.50.1 (Apple Git-155)


  parent reply	other threads:[~2026-09-11 21:42 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-11 21:41 [PATCH v6 0/9] vfio/pci: Add mmap() " Matt Evans
2026-09-11 21:41 ` [PATCH v6 1/9] vfio/pci: Remove DMABUF export dependency on vdev->memory_lock Matt Evans
2026-09-11 21:41 ` [PATCH v6 2/9] vfio/pci: Un-revoke DMABUFs in LOW_POWER_ENTRY_WITH_WAKEUP resume Matt Evans
2026-09-11 21:41 ` [PATCH v6 3/9] dma-buf: Export dma_buf_set_name() Matt Evans
2026-09-14 11:06   ` Christian König
2026-09-15 13:35     ` Matt Evans
2026-09-11 21:41 ` Matt Evans [this message]
2026-09-11 21:41 ` [PATCH v6 5/9] vfio/pci: Add a helper to create a DMABUF for a BAR-map VMA Matt Evans
2026-09-15 12:16   ` liulongfang
2026-09-11 21:41 ` [PATCH v6 6/9] vfio/pci: Convert BAR mmap() to use a DMABUF Matt Evans
2026-09-11 21:41 ` [PATCH v6 7/9] vfio/pci: Clean up BAR zap and revocation Matt Evans
2026-09-11 21:41 ` [PATCH v6 8/9] vfio/pci: Support mmap() of a VFIO DMABUF Matt Evans
2026-09-11 21:41 ` [PATCH v6 9/9] vfio/pci: Permanently revoke a DMABUF on request Matt Evans
2026-09-13 16:52   ` Leon Romanovsky
2026-09-14 11:36     ` Jason Gunthorpe
2026-09-14 11:54       ` Leon Romanovsky
2026-09-14 11:58         ` Jason Gunthorpe
2026-09-14 12:06           ` Leon Romanovsky
2026-09-14 12:08             ` Jason Gunthorpe
2026-09-14 12:13         ` Matt Evans
2026-09-15  7:20           ` Leon Romanovsky
2026-09-15 11:13             ` Christian König
2026-09-15 14:22               ` Matt Evans
2026-09-16 14:19                 ` Christian König
2026-09-15 12:35           ` Jason Gunthorpe
2026-09-15 14:30             ` Matt Evans

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260911214200.33793-5-matt@ozlabs.org \
    --to=matt@ozlabs.org \
    --cc=alex@shazbot.org \
    --cc=amastro@fb.com \
    --cc=ankita@nvidia.com \
    --cc=apopple@nvidia.com \
    --cc=bhelgaas@google.com \
    --cc=bjorn@kernel.org \
    --cc=christian.koenig@amd.com \
    --cc=dmatlack@google.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jgg@nvidia.com \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=leon@kernel.org \
    --cc=linaro-mm-sig@lists.linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liulongfang@huawei.com \
    --cc=logang@deltatee.com \
    --cc=mngyadam@amazon.de \
    --cc=praan@google.com \
    --cc=sumit.semwal@linaro.org \
    --cc=vivek.kasireddy@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®