From: "Adrián Larumbe" <adrian.larumbe@collabora.com>
To: Boris Brezillon <boris.brezillon@collabora.com>,
Rob Herring <robh@kernel.org>,
Steven Price <steven.price@arm.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>,
Faith Ekstrand <faith.ekstrand@collabora.com>,
"Marty E. Plummer" <hanetzer@startmail.com>,
Tomeu Vizoso <tomeu@tomeuvizoso.net>,
Eric Anholt <eric@anholt.net>,
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>,
Robin Murphy <robin.murphy@arm.com>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
"Collabora Kernel Team" <kernel@collabora.com>,
"Adrián Larumbe" <adrian.larumbe@collabora.com>,
"Neil Armstrong" <neil.armstrong@linaro.org>
Subject: [PATCH v9 08/16] drm/panfrost: Move all DRM device initialisation into device_init()
Date: Sat, 12 Sep 2026 00:28:09 +0100 [thread overview]
Message-ID: <20260912-claude-fixes-v9-8-e588feaa61ef@collabora.com> (raw)
In-Reply-To: <20260912-claude-fixes-v9-0-e588feaa61ef@collabora.com>
Ideally the probe() function will do as little as possible, and all device
initialisation and registration should happen inside the panfrost device
subsystem, just like it's done in Panthor. This also simplifies resource
unwinding in the error path.
Do the same thing for DRM driver remove, as in, sweep most of the action
into panfrost_device_fini(), just like we did for device probe.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
---
drivers/gpu/drm/panfrost/panfrost_device.c | 37 +++++++++++++++++++++++
drivers/gpu/drm/panfrost/panfrost_drv.c | 47 +-----------------------------
2 files changed, 38 insertions(+), 46 deletions(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_device.c b/drivers/gpu/drm/panfrost/panfrost_device.c
index 2fcbd223204c..ec2b1d29a26c 100644
--- a/drivers/gpu/drm/panfrost/panfrost_device.c
+++ b/drivers/gpu/drm/panfrost/panfrost_device.c
@@ -8,6 +8,7 @@
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#include <drm/drm_drv.h>
#include "panfrost_device.h"
#include "panfrost_devfreq.h"
@@ -230,6 +231,12 @@ int panfrost_device_init(struct panfrost_device *pfdev)
{
int err;
+ pfdev->comp = of_device_get_match_data(pfdev->base.dev);
+ if (!pfdev->comp)
+ return -ENODEV;
+
+ pfdev->coherent = device_get_dma_attr(pfdev->base.dev) == DEV_DMA_COHERENT;
+
#ifdef CONFIG_DEBUG_FS
mutex_init(&pfdev->debugfs.gems_lock);
INIT_LIST_HEAD(&pfdev->debugfs.gems_list);
@@ -291,8 +298,31 @@ int panfrost_device_init(struct panfrost_device *pfdev)
if (err)
goto out_perfcnt;
+ pm_runtime_set_active(pfdev->base.dev);
+ pm_runtime_mark_last_busy(pfdev->base.dev);
+ pm_runtime_get_noresume(pfdev->base.dev);
+ pm_runtime_enable(pfdev->base.dev);
+ pm_runtime_set_autosuspend_delay(pfdev->base.dev, 50); /* ~3 frames */
+ pm_runtime_use_autosuspend(pfdev->base.dev);
+
+ /*
+ * Register the DRM device with the core and the connectors with
+ * sysfs
+ */
+ err = drm_dev_register(&pfdev->base, 0);
+ if (err < 0)
+ goto err_disable_rpm;
+
+ pm_runtime_put_autosuspend(pfdev->base.dev);
+
return 0;
+err_disable_rpm:
+ pm_runtime_dont_use_autosuspend(pfdev->base.dev);
+ pm_runtime_disable(pfdev->base.dev);
+ pm_runtime_put_noidle(pfdev->base.dev);
+ pm_runtime_set_suspended(pfdev->base.dev);
+ panfrost_gem_fini(pfdev);
out_perfcnt:
panfrost_perfcnt_fini(pfdev);
out_job:
@@ -316,6 +346,13 @@ int panfrost_device_init(struct panfrost_device *pfdev)
void panfrost_device_fini(struct panfrost_device *pfdev)
{
+ pm_runtime_get_sync(pfdev->base.dev);
+
+ pm_runtime_dont_use_autosuspend(pfdev->base.dev);
+ pm_runtime_disable(pfdev->base.dev);
+ pm_runtime_put_noidle(pfdev->base.dev);
+ pm_runtime_set_suspended(pfdev->base.dev);
+
panfrost_gem_fini(pfdev);
panfrost_perfcnt_fini(pfdev);
panfrost_jm_fini(pfdev);
diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
index a3eff77add55..f77780c72a1a 100644
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -830,7 +830,6 @@ static const struct drm_driver panfrost_drm_driver = {
static int panfrost_probe(struct platform_device *pdev)
{
struct panfrost_device *pfdev;
- int err;
pfdev = devm_drm_dev_alloc(&pdev->dev, &panfrost_drm_driver,
struct panfrost_device, base);
@@ -839,46 +838,7 @@ static int panfrost_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pfdev);
- pfdev->comp = of_device_get_match_data(&pdev->dev);
- if (!pfdev->comp)
- return -ENODEV;
-
- pfdev->coherent = device_get_dma_attr(&pdev->dev) == DEV_DMA_COHERENT;
-
- err = panfrost_device_init(pfdev);
- if (err) {
- if (err != -EPROBE_DEFER)
- dev_err(&pdev->dev, "Fatal error during GPU init\n");
- goto err_out0;
- }
-
- pm_runtime_set_active(pfdev->base.dev);
- pm_runtime_mark_last_busy(pfdev->base.dev);
- pm_runtime_get_noresume(pfdev->base.dev);
- pm_runtime_enable(pfdev->base.dev);
- pm_runtime_set_autosuspend_delay(pfdev->base.dev, 50); /* ~3 frames */
- pm_runtime_use_autosuspend(pfdev->base.dev);
-
- /*
- * Register the DRM device with the core and the connectors with
- * sysfs
- */
- err = drm_dev_register(&pfdev->base, 0);
- if (err < 0)
- goto err_out1;
-
- pm_runtime_put_autosuspend(pfdev->base.dev);
-
- return 0;
-
-err_out1:
- pm_runtime_dont_use_autosuspend(pfdev->base.dev);
- pm_runtime_disable(pfdev->base.dev);
- pm_runtime_put_noidle(pfdev->base.dev);
- pm_runtime_set_suspended(pfdev->base.dev);
- panfrost_device_fini(pfdev);
-err_out0:
- return err;
+ return panfrost_device_init(pfdev);
}
static void panfrost_remove(struct platform_device *pdev)
@@ -887,11 +847,6 @@ static void panfrost_remove(struct platform_device *pdev)
drm_dev_unregister(&pfdev->base);
- pm_runtime_get_sync(pfdev->base.dev);
- pm_runtime_dont_use_autosuspend(pfdev->base.dev);
- pm_runtime_put_noidle(pfdev->base.dev);
- pm_runtime_disable(pfdev->base.dev);
- pm_runtime_set_suspended(pfdev->base.dev);
panfrost_device_fini(pfdev);
}
--
2.55.0
next prev parent reply other threads:[~2026-09-11 23:29 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-11 23:28 [PATCH v9 00/16] Collection of fixes for Panfrost: Perfcnt, RPM, refactorings Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 01/16] drm/panfrost: Move shrinker initialization and unplug one level down Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 02/16] drm/panfrost: Move lock and modparam initialisations into their subsystems Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 03/16] drm/panfrost: Move debugfs initialisation to relevant subsystems Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 04/16] drm/panfrost: Skip NULL checks for clock enable/disabling Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 05/16] drm/panfrost: Consolidate device clock management and reset Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 06/16] drm/panfrost: Fix PM refcnt and autosuspend issues at device probe/remove Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 07/16] drm/panfrost: Explicitly enable MMU interrupts at device init Adrián Larumbe
2026-09-11 23:28 ` Adrián Larumbe [this message]
2026-09-11 23:28 ` [PATCH v9 09/16] drm/panfrost: Add warning messages to fatal error conditions Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 10/16] drm/panfrost: Add debugfs knob for manually triggering a GPU reset Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 11/16] drm/panfrost: Move perfcnt GPU disable sequence into a helper Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 12/16] drm/panfrost: Skip cache flush/invalidate when enabling perfcnt Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 13/16] drm/panfrost: Avoid cache flush after perfcnt sample in fully coherent systems Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 14/16] drm/panfrost: Introduce a reset lock Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 15/16] drm/panfrost: Fix races between perfcnt and reset sequence Adrián Larumbe
2026-09-11 23:28 ` [PATCH v9 16/16] drm/panfrost: Bump driver minor to reflect new DUMP IOCTL req field Adrián Larumbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260912-claude-fixes-v9-8-e588feaa61ef@collabora.com \
--to=adrian.larumbe@collabora.com \
--cc=airlied@gmail.com \
--cc=alyssa.rosenzweig@collabora.com \
--cc=boris.brezillon@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=faith.ekstrand@collabora.com \
--cc=hanetzer@startmail.com \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=simona@ffwll.ch \
--cc=steven.price@arm.com \
--cc=tomeu@tomeuvizoso.net \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®