mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Myeonghun Pak <mhun512@gmail.com>
To: "Thierry Reding" <thierry.reding@kernel.org>,
	"Uwe Kleine-König" <ukleinek@kernel.org>,
	"Jonathan Hunter" <jonathanh@nvidia.com>
Cc: Dmitry Osipenko <digetx@gmail.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	linux-pwm@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	Ijae Kim <ae878000@gmail.com>
Subject: [PATCH] pwm: tegra: Disable runtime PM on cleanup errors
Date: Sun, 13 Sep 2026 00:06:06 -0400	[thread overview]
Message-ID: <20260913040606.23272-1-mhun512@gmail.com> (raw)

tegra_pwm_probe() enables runtime PM before requesting the initial resume.
If pm_runtime_resume_and_get() fails, probe returns with runtime PM still
enabled as the managed driver resources are released.

The later probe unwind and remove paths use pm_runtime_force_suspend(),
which disables runtime PM on success but enables it again if the suspend
callback fails. Ignoring that error can therefore also leave runtime PM
enabled during resource cleanup.

Disable runtime PM on the initial resume failure and when force-suspend
fails. Do not disable it a second time after successful force-suspend, and
preserve the original probe error. The failed resume_and_get call has
already balanced its usage count, so it needs no additional put.

This issue was identified during our ongoing static-analysis research while
reviewing kernel code.

Fixes: 3da9b0feaa16 ("pwm: tegra: Add runtime PM and OPP support")
Cc: stable@vger.kernel.org
Assisted-by: OpenAI:GPT-5.6
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
 drivers/pwm/pwm-tegra.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index 5cdbe120b..55287afcb 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -346,8 +346,10 @@ static int tegra_pwm_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(&pdev->dev);
 	ret = pm_runtime_resume_and_get(&pdev->dev);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(&pdev->dev);
 		return ret;
+	}
 
 	/* Set maximum frequency of the IP */
 	ret = dev_pm_opp_set_rate(&pdev->dev, ULONG_MAX);
@@ -395,7 +397,8 @@ static int tegra_pwm_probe(struct platform_device *pdev)
 	return 0;
 put_pm:
 	pm_runtime_put_sync_suspend(&pdev->dev);
-	pm_runtime_force_suspend(&pdev->dev);
+	if (pm_runtime_force_suspend(&pdev->dev))
+		pm_runtime_disable(&pdev->dev);
 	return ret;
 }
 
@@ -408,7 +411,8 @@ static void tegra_pwm_remove(struct platform_device *pdev)
 
 	reset_control_assert(pc->rst);
 
-	pm_runtime_force_suspend(&pdev->dev);
+	if (pm_runtime_force_suspend(&pdev->dev))
+		pm_runtime_disable(&pdev->dev);
 }
 
 static int __maybe_unused tegra_pwm_runtime_suspend(struct device *dev)

             reply	other threads:[~2026-09-13  4:06 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-13  4:06 Myeonghun Pak [this message]
2026-09-14  6:20 ` Mikko Perttunen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260913040606.23272-1-mhun512@gmail.com \
    --to=mhun512@gmail.com \
    --cc=ae878000@gmail.com \
    --cc=digetx@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=thierry.reding@kernel.org \
    --cc=ukleinek@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®