[PATCH] drm/msm/hdmi_phy: fix runtime PM cleanup on probe failure

[Guangshuo Li <lgs201920130244@gmail.com>]

msm_hdmi_phy_probe() enables runtime PM before enabling the PHY
resources and initializing the PLL, but failures from either operation
return without calling the matching pm_runtime_disable().

The remove path disables runtime PM, but it is not called when probe
fails. As a result, runtime PM remains enabled after an unsuccessful
probe.

Route failures after pm_runtime_enable() through a common error path
and disable runtime PM before returning.

This issue was found by manual code inspection.

Fixes: 15b4a4523859 ("drm/msm/hdmi: Create a separate HDMI PHY driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
---
 drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
index eb1088755cb3..77dce35cd45e 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
@@ -168,13 +168,13 @@ static int msm_hdmi_phy_probe(struct platform_device *pdev)
 
 	ret = msm_hdmi_phy_resource_enable(phy);
 	if (ret)
-		return ret;
+		goto err_pm_disable;
 
 	ret = msm_hdmi_phy_pll_init(pdev, phy->cfg->type);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "couldn't init PLL\n");
 		msm_hdmi_phy_resource_disable(phy);
-		return ret;
+		goto err_pm_disable;
 	}
 
 	msm_hdmi_phy_resource_disable(phy);
@@ -182,6 +182,10 @@ static int msm_hdmi_phy_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, phy);
 
 	return 0;
+
+err_pm_disable:
+	pm_runtime_disable(dev);
+	return ret;
 }
 
 static void msm_hdmi_phy_remove(struct platform_device *pdev)
-- 
2.43.0