From: Chancel Liu <chancel.liu@oss.nxp.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
Baojun Xu <baojun.xu@ti.com>, Sen Wang <sen@ti.com>,
David Rhodes <david.rhodes@cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>,
patches@opensource.cirrus.com, linux-sound@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/6] ASoC: wm8995: Register regulator notifiers from the bus probe
Date: Sun, 13 Sep 2026 19:15:27 +0900 [thread overview]
Message-ID: <20260913101531.2787654-3-chancel.liu@oss.nxp.com> (raw)
In-Reply-To: <20260913101531.2787654-1-chancel.liu@oss.nxp.com>
From: Chancel Liu <chancel.liu@nxp.com>
wm8995 requests its regulator supplies and registers the regulator
disable notifiers from the ASoC component probe, but the associated
devres cleanup is tied to the underlying I2C/SPI device.
These resources are only mishandled when the sound card is unregistered
and re-registered while the bus device stays bound. On that path the
component probe runs again and re-registers the same notifier_block on
the still-registered regulator notifier chain and corrupts the chain.
Move the supply request and notifier registration into a helper,
wm8995_hw_init(), and call it from wm8995_i2c_probe() and
wm8995_spi_probe() so they run once per bus device bind. The regulator
enable and the register accesses that need the component stay in
wm8995_probe().
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
---
sound/soc/codecs/wm8995.c | 41 ++++++++++++++++++++++++++-------------
1 file changed, 27 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/wm8995.c b/sound/soc/codecs/wm8995.c
index 799989a5bf0f..35cbd0fb7f1a 100644
--- a/sound/soc/codecs/wm8995.c
+++ b/sound/soc/codecs/wm8995.c
@@ -1993,23 +1993,17 @@ static int wm8995_set_bias_level(struct snd_soc_component *component,
return 0;
}
-static int wm8995_probe(struct snd_soc_component *component)
+static int wm8995_hw_init(struct device *dev, struct wm8995_priv *wm8995)
{
- struct wm8995_priv *wm8995;
- int i;
- int ret;
-
- wm8995 = snd_soc_component_get_drvdata(component);
- wm8995->component = component;
+ int i, ret;
for (i = 0; i < ARRAY_SIZE(wm8995->supplies); i++)
wm8995->supplies[i].supply = wm8995_supply_names[i];
- ret = devm_regulator_bulk_get(component->dev,
- ARRAY_SIZE(wm8995->supplies),
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(wm8995->supplies),
wm8995->supplies);
if (ret) {
- dev_err(component->dev, "Failed to request supplies: %d\n", ret);
+ dev_err(dev, "Failed to request supplies: %d\n", ret);
return ret;
}
@@ -2024,16 +2018,27 @@ static int wm8995_probe(struct snd_soc_component *component)
/* This should really be moved into the regulator core */
for (i = 0; i < ARRAY_SIZE(wm8995->supplies); i++) {
- ret = devm_regulator_register_notifier(
- wm8995->supplies[i].consumer,
- &wm8995->disable_nb[i]);
+ ret = devm_regulator_register_notifier(wm8995->supplies[i].consumer,
+ &wm8995->disable_nb[i]);
if (ret) {
- dev_err(component->dev,
+ dev_err(dev,
"Failed to register regulator notifier: %d\n",
ret);
+ return ret;
}
}
+ return 0;
+}
+
+static int wm8995_probe(struct snd_soc_component *component)
+{
+ struct wm8995_priv *wm8995;
+ int ret;
+
+ wm8995 = snd_soc_component_get_drvdata(component);
+ wm8995->component = component;
+
ret = regulator_bulk_enable(ARRAY_SIZE(wm8995->supplies),
wm8995->supplies);
if (ret) {
@@ -2216,6 +2221,10 @@ static int wm8995_spi_probe(struct spi_device *spi)
return ret;
}
+ ret = wm8995_hw_init(&spi->dev, wm8995);
+ if (ret)
+ return ret;
+
ret = devm_snd_soc_register_component(&spi->dev,
&soc_component_dev_wm8995, wm8995_dai,
ARRAY_SIZE(wm8995_dai));
@@ -2249,6 +2258,10 @@ static int wm8995_i2c_probe(struct i2c_client *i2c)
return ret;
}
+ ret = wm8995_hw_init(&i2c->dev, wm8995);
+ if (ret)
+ return ret;
+
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm8995, wm8995_dai,
ARRAY_SIZE(wm8995_dai));
--
2.50.1
next prev parent reply other threads:[~2026-09-13 10:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-13 10:15 [PATCH 0/6] ASoC: codecs: Fix resource leaks on card re-bind Chancel Liu
2026-09-13 10:15 ` [PATCH 1/6] ASoC: wm8962: Fix regulator notifier and beep " Chancel Liu
2026-09-14 10:56 ` Charles Keepax
2026-09-13 10:15 ` Chancel Liu [this message]
2026-09-14 12:49 ` [PATCH 2/6] ASoC: wm8995: Register regulator notifiers from the bus probe Charles Keepax
2026-09-13 10:15 ` [PATCH 3/6] ASoC: tlv320aic31xx: Register regulator notifier from the I2C probe Chancel Liu
2026-09-13 10:15 ` [PATCH 4/6] ASoC: tlv320aic3x: Register regulator notifier from the bus probe Chancel Liu
2026-09-13 10:15 ` [PATCH 5/6] ASoC: cs42l52: Fix beep input device leak on card re-bind Chancel Liu
2026-09-14 12:51 ` Charles Keepax
2026-09-13 10:15 ` [PATCH 6/6] ASoC: cs42l56: " Chancel Liu
2026-09-14 12:52 ` Charles Keepax
2026-09-14 13:58 ` [PATCH 0/6] ASoC: codecs: Fix resource leaks " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260913101531.2787654-3-chancel.liu@oss.nxp.com \
--to=chancel.liu@oss.nxp.com \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=david.rhodes@cirrus.com \
--cc=kevin-lu@ti.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=sen@ti.com \
--cc=shenghao-ding@ti.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®