From: Shawn Guo <shengchao.guo@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>,
Yu Zhang <yu.zhang@oss.qualcomm.com>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org,
Shawn Guo <shengchao.guo@oss.qualcomm.com>
Subject: [PATCH 3/5] arm64: dts: qcom: nord-ride-embedded: Enable PCIe controllers and PHY
Date: Mon, 14 Sep 2026 15:19:42 +0800 [thread overview]
Message-ID: <20260914071944.164217-4-shengchao.guo@oss.qualcomm.com> (raw)
In-Reply-To: <20260914071944.164217-1-shengchao.guo@oss.qualcomm.com>
From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
The Nord Ride Embedded board routes all four PCIe links, so enable
pcie0-pcie3 and the QMP PHY, supply the per-port PHY and PLL rails, and
describe the PERST# and WAKE# lines of each root port.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
.../boot/dts/qcom/nord-ride-embedded.dts | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts b/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts
index 09ee525764ef..0b230551a49f 100644
--- a/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts
+++ b/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts
@@ -366,6 +366,55 @@ vreg_l3l_1p8: ldo3 {
};
};
+&pcie_phy {
+ vdda-phy-a-supply = <&vreg_l6a_1p2>;
+ vdda-phy-b-supply = <&vreg_l4a_1p2>;
+ vdda-phy-c-supply = <&vreg_l4a_1p2>;
+ vdda-phy-d-supply = <&vreg_l4a_1p2>;
+ vdda-pll-a-supply = <&vreg_l1e_0p9>;
+ vdda-pll-b-supply = <&vreg_l1e_0p9>;
+ vdda-pll-c-supply = <&vreg_l1e_0p9>;
+ vdda-pll-d-supply = <&vreg_l1e_0p9>;
+
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie0_port0 {
+ reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie1_port0 {
+ reset-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+};
+
+&pcie2 {
+ status = "okay";
+};
+
+&pcie2_port0 {
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+};
+
+&pcie3 {
+ status = "okay";
+};
+
+&pcie3_port0 {
+ reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+};
+
&qupv3_0 {
firmware-name = "qcom/nord/qupv3fw.elf";
--
2.43.0
next prev parent reply other threads:[~2026-09-14 7:20 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-14 7:19 [PATCH 0/5] arm64: dts: qcom: nord: Add PCIe and WLAN support Shawn Guo
2026-09-14 7:19 ` [PATCH 1/5] arm64: dts: qcom: nord: Add PCIe PHY and controller nodes Shawn Guo
2026-09-14 7:30 ` Shawn Guo
2026-09-14 13:54 ` Abel Vesa
2026-09-14 7:19 ` [PATCH 2/5] arm64: dts: qcom: nord-rrd: Enable PCIe controllers and PHY Shawn Guo
2026-09-14 10:44 ` Konrad Dybcio
2026-09-14 13:48 ` Abel Vesa
2026-09-14 7:19 ` Shawn Guo [this message]
2026-09-14 10:44 ` [PATCH 3/5] arm64: dts: qcom: nord-ride-embedded: " Konrad Dybcio
2026-09-14 13:48 ` Abel Vesa
2026-09-14 7:19 ` [PATCH 4/5] arm64: dts: qcom: nord-ride-embedded: Add WCN7850 WLAN support Shawn Guo
2026-09-14 10:45 ` Konrad Dybcio
2026-09-14 13:49 ` Abel Vesa
2026-09-14 7:19 ` [PATCH 5/5] arm64: dts: qcom: nord-rrd: " Shawn Guo
2026-09-14 10:45 ` Konrad Dybcio
2026-09-14 13:50 ` Abel Vesa
2026-09-14 15:04 ` [PATCH 0/5] arm64: dts: qcom: nord: Add PCIe and " Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260914071944.164217-4-shengchao.guo@oss.qualcomm.com \
--to=shengchao.guo@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krishna.chundru@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=yu.zhang@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®