From: Karl Mehltretter <kmehltretter@gmail.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Karl Mehltretter <kmehltretter@gmail.com>,
linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH] rtc: class: Make the time32 hctosys limit configurable
Date: Mon, 14 Sep 2026 23:25:37 +0200 [thread overview]
Message-ID: <20260914212537.1452-1-kmehltretter@gmail.com> (raw)
On 32-bit systems with RTC_HCTOSYS enabled, rtc_hctosys() rejects
RTC dates whose seconds value exceeds INT_MAX, even when userspace
uses a 64-bit time_t. This leaves system time uninitialized by the RTC.
Commit b3a5ac42ab18 ("rtc: hctosys: Ensure system time doesn't overflow
time_t") introduced this limit to protect time32 userspace from future
RTC dates that can break boot. The same limit prevents systems with
time64 userspace from initializing the clock from valid post-2038 dates.
Add RTC_HCTOSYS_TIME32_LIMIT for 32-bit kernels, defaulting to y to
preserve the existing safeguard. Allow integrators to disable it once
their entire userspace, including init, supports post-2038 dates.
Warn on rejection with the RTC date and option name so users can
identify the cause and find the setting.
Keep the option independent of COMPAT_32BIT_TIME. Userspace with a
64-bit time_t may still need legacy syscalls for operations that do
not represent post-2038 dates.
Fixes: b3a5ac42ab18 ("rtc: hctosys: Ensure system time doesn't overflow time_t")
Link: https://lore.kernel.org/all/20220908115337.1604277-1-arnd@kernel.org/
Assisted-by: LLM
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
---
Tested this exact patch on SAM9X75 Curiosity (32-bit ARM, rtc0),
using three full kernel builds and six powered warm boots:
TIME32_LIMIT COMPAT_32BIT_TIME RTC in 2026 RTC in 2040
y y hctosys=1 hctosys=0, epoch + 2 s
n y hctosys=1 hctosys=1, correct time
n n hctosys=1 hctosys=1, correct time
The default-limit 2040 boot logged the rejected date and
CONFIG_RTC_HCTOSYS_TIME32_LIMIT=y. The other boots did not warn.
Legacy clock_gettime and futex returned -ENOSYS with COMPAT_32BIT_TIME=n.
Tests used a minimal time64 initramfs without NTP. Current clocks and
all original boot files were restored after testing.
Host tests checked Kconfig defaults and dependencies, the INT_MAX
boundary and error paths.
drivers/rtc/Kconfig | 23 +++++++++++++++++++++++
drivers/rtc/class.c | 8 +++++---
2 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 05b9233b9418..a594c041bc35 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -30,6 +30,29 @@ config RTC_HCTOSYS
the value read from a specified RTC device. This is useful to avoid
unnecessary fsck runs at boot time, and to network better.
+config RTC_HCTOSYS_TIME32_LIMIT
+ bool "Reject RTC dates after the 2038 cutoff"
+ depends on RTC_HCTOSYS && !64BIT
+ default y
+ help
+ Reject RTC dates after 03:14:07 UTC on 19 January 2038 when
+ initializing the system clock. This preserves the existing
+ safeguard for userspace using a signed 32-bit time_t.
+
+ A rejected date leaves system time unchanged, normally near the
+ Unix epoch, and the RTC's hctosys sysfs attribute reads 0. Userspace
+ must supply the time if no other source has initialized it.
+
+ Disable this only if the entire userspace, including the init
+ system, supports dates beyond 2038. Otherwise, an invalid future
+ date in the RTC may prevent booting.
+
+ Disabling this check does not require disabling COMPAT_32BIT_TIME:
+ userspace with a 64-bit time_t may still use legacy system calls
+ for operations that do not represent dates beyond 2038.
+
+ If unsure, say Y.
+
config RTC_HCTOSYS_DEVICE
string "RTC used to set the system time"
depends on RTC_HCTOSYS
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 01ba04028f1f..18ea141ab8c2 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -72,12 +72,14 @@ static void rtc_hctosys(struct rtc_device *rtc)
tv64.tv_sec = rtc_tm_to_time64(&tm);
-#if BITS_PER_LONG == 32
- if (tv64.tv_sec > INT_MAX) {
+ if (IS_ENABLED(CONFIG_RTC_HCTOSYS_TIME32_LIMIT) &&
+ tv64.tv_sec > INT_MAX) {
+ dev_warn(rtc->dev.parent,
+ "hctosys: rejecting %ptR UTC due to CONFIG_RTC_HCTOSYS_TIME32_LIMIT=y\n",
+ &tm);
err = -ERANGE;
goto err_read;
}
-#endif
err = do_settimeofday64(&tv64);
base-commit: 587858367581b9c55c3690f4e63382ad622719d4
--
2.39.5 (Apple Git-154)
next reply other threads:[~2026-09-14 21:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-14 21:25 Karl Mehltretter [this message]
2026-09-15 5:48 ` Arnd Bergmann
2026-09-15 22:37 ` Karl Mehltretter
2026-09-16 6:56 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260914212537.1452-1-kmehltretter@gmail.com \
--to=kmehltretter@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®