[PATCH 01/10] HID: hid-lenovo-go-s: Return ret instead of 0 in mcu_property_out()

["Derek J. Clark" <derekjohn.clark@gmail.com>]

Currently mcu_property_out() blanket returns 0, discarding the ret
value and any errors with it. Wait completion returns a positive value
when it is not timed out, which would error on all successes, so if it
is positive return the ret value from the raw event handler. Only if
it is 0 set it to -EBUSY, otherwise pass the actual error.

Fixes: a23f3497bf208c59ad ("HID: hid-lenovo-go-s: Add Lenovo Legion Go S Series HID Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
---
 drivers/hid/hid-lenovo-go-s.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/hid/hid-lenovo-go-s.c b/drivers/hid/hid-lenovo-go-s.c
index a72f7f748cb5..68301d4c762a 100644
--- a/drivers/hid/hid-lenovo-go-s.c
+++ b/drivers/hid/hid-lenovo-go-s.c
@@ -38,6 +38,7 @@ static struct hid_gos_cfg {
 	struct led_classdev *led_cdev;
 	struct hid_device *hdev;
 	struct mutex cfg_mutex; /*ensure single synchronous output report*/
+	int cmd_status;
 	u8 gp_auto_sleep_time;
 	u8 gp_dpad_mode;
 	u8 gp_mode;
@@ -435,7 +436,9 @@ static int hid_gos_raw_event(struct hid_device *hdev, struct hid_report *report,
 	dev_dbg(&hdev->dev, "Rx data as raw input report: [%*ph]\n",
 		GO_S_PACKET_SIZE, data);
 
+	drvdata.cmd_status = ret;
 	complete(&drvdata.send_cmd_complete);
+
 	return ret;
 }
 
@@ -474,12 +477,10 @@ static int mcu_property_out(struct hid_device *hdev, u8 command, u8 index,
 	timeout = (command == GET_PL_TEST) ? 200 : 5;
 	ret = wait_for_completion_interruptible_timeout(&drvdata.send_cmd_complete,
 							msecs_to_jiffies(timeout));
-
-	if (ret == 0) /* timeout occurred */
-		ret = -EBUSY;
+	ret = ret > 0 ? drvdata.cmd_status : ret ?: -EBUSY;
 
 	reinit_completion(&drvdata.send_cmd_complete);
-	return 0;
+	return ret;
 }
 
 static ssize_t gamepad_property_store(struct device *dev,
-- 
2.55.0