mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Myeonghun Pak <mhun512@gmail.com>
To: Jean-Christophe Trotin <jean-christophe.trotin@foss.st.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: [PATCH 1/2] media: sti: hva: Drop redundant clock preparation in probe
Date: Mon, 14 Sep 2026 21:13:26 -0400	[thread overview]
Message-ID: <20260915011327.57695-1-mhun512@gmail.com> (raw)

hva_hw_probe() prepares the clock separately from the runtime PM
callbacks. The callbacks balance their own clk_prepare_enable() and
clk_disable_unprepare() calls, leaving the probe's extra prepare
reference behind on removal.

Let runtime PM own clock preparation. Runtime resume already prepares
the clock before the IP version check and encoding operations, so the
extra reference is unnecessary.

This issue was identified during our ongoing static-analysis research
while reviewing kernel code.

Fixes: 57b2c0628b60 ("[media] st-hva: multi-format video encoder V4L2 driver")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
 drivers/media/platform/st/sti/hva/hva-hw.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/media/platform/st/sti/hva/hva-hw.c b/drivers/media/platform/st/sti/hva/hva-hw.c
--- a/drivers/media/platform/st/sti/hva/hva-hw.c
+++ b/drivers/media/platform/st/sti/hva/hva-hw.c
@@ -329,17 +329,10 @@ int hva_hw_probe(struct platform_device *pdev, struct hva_dev *hva)
 		return PTR_ERR(hva->clk);
 	}
 
-	ret = clk_prepare(hva->clk);
-	if (ret < 0) {
-		dev_err(dev, "%s     failed to prepare clock\n", HVA_PREFIX);
-		hva->clk = ERR_PTR(-EINVAL);
-		return ret;
-	}
-
 	/* get status interruption resource */
 	ret  = platform_get_irq(pdev, 0);
 	if (ret < 0)
-		goto err_clk;
+		return ret;
 	hva->irq_its = ret;
 
 	ret = devm_request_threaded_irq(dev, hva->irq_its, hva_hw_its_interrupt,
@@ -349,14 +342,14 @@ int hva_hw_probe(struct platform_device *pdev, struct hva_dev *hva)
 	if (ret) {
 		dev_err(dev, "%s     failed to install status IRQ 0x%x\n",
 			HVA_PREFIX, hva->irq_its);
-		goto err_clk;
+		return ret;
 	}
 	disable_irq(hva->irq_its);
 
 	/* get error interruption resource */
 	ret = platform_get_irq(pdev, 1);
 	if (ret < 0)
-		goto err_clk;
+		return ret;
 	hva->irq_err = ret;
 
 	ret = devm_request_threaded_irq(dev, hva->irq_err, hva_hw_err_interrupt,
@@ -366,7 +359,7 @@ int hva_hw_probe(struct platform_device *pdev, struct hva_dev *hva)
 	if (ret) {
 		dev_err(dev, "%s     failed to install error IRQ 0x%x\n",
 			HVA_PREFIX, hva->irq_err);
-		goto err_clk;
+		return ret;
 	}
 	disable_irq(hva->irq_err);
 
@@ -405,8 +398,6 @@ err_pm:
 	pm_runtime_put(dev);
 err_disable:
 	pm_runtime_disable(dev);
-err_clk:
-	clk_unprepare(hva->clk);
 
 	return ret;
 }
-- 
2.51.0

             reply	other threads:[~2026-09-15  1:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-15  1:13 Myeonghun Pak [this message]
2026-09-15  1:13 ` [PATCH 2/2] media: sti: hva: Release the runtime clock on teardown Myeonghun Pak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260915011327.57695-1-mhun512@gmail.com \
    --to=mhun512@gmail.com \
    --cc=jean-christophe.trotin@foss.st.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®