mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Prasanth Kumar Padarthi <prasanth.padarthi10@gmail.com>
To: Joel Stanley <joel@jms.id.au>,
	Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Ryan Chen <ryan_chen@aspeedtech.com>,
	Billy Tsai <billy_tsai@aspeedtech.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	Prasanth Kumar Padarthi <prasanth.padarthi10@gmail.com>
Subject: [PATCH v5 2/2] ARM: dts: aspeed: Add ASRock Rack B650D4U BMC
Date: Tue, 15 Sep 2026 07:01:10 +0530	[thread overview]
Message-ID: <20260915013110.4780-3-prasanth.padarthi10@gmail.com> (raw)
In-Reply-To: <20260915013110.4780-1-prasanth.padarthi10@gmail.com>

Add the device tree for the ASRock Rack B650D4U BMC, which is
based on the ASPEED AST2600 SoC.

Describe the BMC memory, SPI NOR flash layout, UART console,
GPIO line names, video framebuffer memory, I2C EEPROM, and MAC0
connected to an RTL8211F Ethernet PHY.

Use the EEPROM on I2C7 as the NVMEM provider for the MAC0 address.

Configure MAC0 to use the RTL8211F in RGMII-ID mode.

Signed-off-by: Prasanth Kumar Padarthi <prasanth.padarthi10@gmail.com>
---
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../dts/aspeed/aspeed-bmc-asrock-b650d4u.dts  | 120 ++++++++++++++++++
 2 files changed, 121 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 6b68671f9379..b109491d5c8f 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-ampere-mtmitchell.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-altrad8.dtb \
+	aspeed-bmc-asrock-b650d4u.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
 	aspeed-bmc-asrock-e3c256d4i.dtb \
 	aspeed-bmc-asrock-paul-ipmi-card.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts
new file mode 100644
index 000000000000..6585bda56a4c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "ASRock Rack B650D4U BMC";
+	compatible = "asrock,b650d4u-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		/* A0-A7 */	"","","","","","","","",
+		/* B0-B7 */	"","","","","","","","",
+		/* C0-C7 */	"","","","","","","","",
+		/* D0-D7 */	"","","","","","","","",
+		/* E0-E7 */	"","","","","","","","",
+		/* F0-F7 */	"","","","","","button-reset-n","","",
+		/* G0-G7 */	"","","","","","","","",
+		/* H0-H7 */	"","","","","","","","",
+		/* I0-I7 */	"","","","","","","","",
+		/* J0-J7 */	"","","","","","","","",
+		/* K0-K7 */	"","","","","","","","",
+		/* L0-L7 */	"","","","","","","","",
+		/* M0-M7 */	"","","","","","","","",
+		/* N0-N7 */	"","","","","","","","",
+		/* O0-O7 */	"","","","","","","","",
+		/* P0-P3 */	"","","","control-power-n";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		status = "okay";
+
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
-- 
2.47.3


  parent reply	other threads:[~2026-09-15  1:31 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-30 18:20 [PATCH v4 0/2] " Prasanth Kumar Padarthi
2026-08-30 18:20 ` [PATCH v4 1/2] dt-bindings: arm: aspeed: Add ASRock Rack B650D4U Prasanth Kumar Padarthi
2026-08-30 18:20 ` [PATCH v4 2/2] ARM: dts: aspeed: Add ASRock Rack B650D4U BMC Prasanth Kumar Padarthi
2026-08-31 12:36   ` Tan Siewert
2026-08-31 12:47     ` Prasanth
2026-08-30 20:23 ` [PATCH v4 0/2] " Andrew Lunn
2026-08-31  2:43   ` Prasanth
     [not found]   ` <CAMFFDGgTnNouukst3V1rEg0NCNMW-BZ6tM6+fbQc0zeXaOb72w@mail.gmail.com>
2026-08-31 12:12     ` Andrew Lunn
2026-08-31 12:50       ` Prasanth
2026-09-15  1:31 ` [PATCH v5 " Prasanth Kumar Padarthi
2026-09-15  1:31   ` [PATCH v5 1/2] dt-bindings: arm: aspeed: Add ASRock Rack B650D4U Prasanth Kumar Padarthi
2026-09-15  1:31   ` Prasanth Kumar Padarthi [this message]
2026-09-15 15:58     ` [PATCH v5 2/2] ARM: dts: aspeed: Add ASRock Rack B650D4U BMC Andrew Lunn
2026-09-16  9:13     ` Tan Siewert
2026-09-17  1:45       ` Prasanth
2026-09-16  9:13   ` [PATCH v5 0/2] " Tan Siewert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260915013110.4780-3-prasanth.padarthi10@gmail.com \
    --to=prasanth.padarthi10@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@codeconstruct.com.au \
    --cc=billy_tsai@aspeedtech.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=ryan_chen@aspeedtech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®