From: Larisa Grigore <larisa.grigore@oss.nxp.com>
To: "Larisa Grigore" <larisa.grigore@oss.nxp.com>,
"NXP S32 Linux Team" <s32@nxp.com>,
"Alim Akhtar" <alim.akhtar@samsung.com>,
"Avri Altman" <avri.altman@sandisk.com>,
"Bart Van Assche" <bvanassche@acm.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Frank Li" <Frank.Li@nxp.com>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
"Martin K. Petersen" <mkp@kernel.org>,
"Sai Krishna Potthuri" <sai.krishna.potthuri@amd.com>,
"Ajay Neeli" <ajay.neeli@amd.com>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Pedro Sousa " <pedrom.sousa@synopsys.com>
Cc: linux-scsi@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, clizzi@redhat.com,
aruizrui@redhat.com, eballetb@redhat.com, echanude@redhat.com
Subject: [PATCH v3 05/10] scsi: ufs: dwc: Export common clock divider and link status helpers
Date: Wed, 16 Sep 2026 10:44:06 +0200 [thread overview]
Message-ID: <20260916084411.941297-6-larisa.grigore@oss.nxp.com> (raw)
In-Reply-To: <20260916084411.941297-1-larisa.grigore@oss.nxp.com>
Make ufshcd_dwc_program_clk_div() and ufshcd_dwc_link_is_up() available to
DWC-based platform glue drivers. These helpers are needed by platform
drivers that must program the controller HCLK divider and verify link state
during their vendor-specific initialization flows.
Signed-off-by: Larisa Grigore <larisa.grigore@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
drivers/ufs/host/ufshcd-dwc.c | 6 ++++--
drivers/ufs/host/ufshcd-dwc.h | 2 ++
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/ufs/host/ufshcd-dwc.c b/drivers/ufs/host/ufshcd-dwc.c
index 0eceec543d14..7fe54923c6c6 100644
--- a/drivers/ufs/host/ufshcd-dwc.c
+++ b/drivers/ufs/host/ufshcd-dwc.c
@@ -39,10 +39,11 @@ EXPORT_SYMBOL(ufshcd_dwc_dme_set_attrs);
* @divider_val: clock divider value to be programmed
*
*/
-static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
+void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
{
ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
}
+EXPORT_SYMBOL(ufshcd_dwc_program_clk_div);
/**
* ufshcd_dwc_link_is_up() - check if link is up.
@@ -50,7 +51,7 @@ static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
*
* Return: 0 on success, non-zero value on failure.
*/
-static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
+int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
{
int dme_result = 0;
@@ -63,6 +64,7 @@ static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
return 1;
}
+EXPORT_SYMBOL(ufshcd_dwc_link_is_up);
/**
* ufshcd_dwc_connection_setup() - configure unipro attributes.
diff --git a/drivers/ufs/host/ufshcd-dwc.h b/drivers/ufs/host/ufshcd-dwc.h
index d8673cd54d4c..53b523ef59df 100644
--- a/drivers/ufs/host/ufshcd-dwc.h
+++ b/drivers/ufs/host/ufshcd-dwc.h
@@ -47,4 +47,6 @@ int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
const struct ufshcd_dme_attr_val *v, int n);
int ufshcd_dwc_phy_reg_write(struct ufs_hba *hba, u32 addr, u32 val);
int ufshcd_dwc_phy_reg_read(struct ufs_hba *hba, u32 addr, u32 *val);
+int ufshcd_dwc_link_is_up(struct ufs_hba *hba);
+void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val);
#endif /* End of Header */
--
2.43.0
next prev parent reply other threads:[~2026-09-16 8:44 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-16 8:44 [PATCH v3 00/10] Add S32N79RDB UFS support Larisa Grigore
2026-09-16 8:44 ` [PATCH v3 01/10] ufs: unipro: Move Tx/Rx FSM state definitions to unipro.h Larisa Grigore
2026-09-16 16:14 ` Frank Li
2026-09-17 9:00 ` Larisa Ileana Grigore
2026-09-16 8:44 ` [PATCH v3 02/10] ufs: unipro: Add TX/RX FSM state attributes Larisa Grigore
2026-09-16 8:44 ` [PATCH v3 03/10] ufs: host: Add common Hibern8 TX FSM polling helper Larisa Grigore
2026-09-16 16:22 ` Frank Li
2026-09-17 9:00 ` Larisa Ileana Grigore
2026-09-16 8:44 ` [PATCH v3 04/10] scsi: ufs: Move Versal2 M-PHY CREG access helpers into ufshcd-dwc Larisa Grigore
2026-09-16 16:29 ` Frank Li
2026-09-16 8:44 ` Larisa Grigore [this message]
2026-09-16 8:44 ` [PATCH v3 06/10] dt-bindings: ufs: Add NXP S32N79 UFS host controller Larisa Grigore
2026-09-16 16:34 ` Frank Li
2026-09-16 8:44 ` [PATCH v3 07/10] scsi: ufs: Add NXP S32N79 UFS host controller driver Larisa Grigore
2026-09-16 8:44 ` [PATCH v3 08/10] arm64: dts: freescale: s32n79: Add UFS host controller Larisa Grigore
2026-09-16 8:44 ` [PATCH v3 09/10] arm64: dts: freescale: s32n79-rdb: Enable UFS Larisa Grigore
2026-09-16 8:44 ` [PATCH v3 10/10] MAINTAINERS: Add NXP S32N7 UFS host controller entry Larisa Grigore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260916084411.941297-6-larisa.grigore@oss.nxp.com \
--to=larisa.grigore@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=ajay.neeli@amd.com \
--cc=alim.akhtar@samsung.com \
--cc=aruizrui@redhat.com \
--cc=avri.altman@sandisk.com \
--cc=bvanassche@acm.org \
--cc=clizzi@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eballetb@redhat.com \
--cc=echanude@redhat.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mani@kernel.org \
--cc=mkp@kernel.org \
--cc=pedrom.sousa@synopsys.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=s32@nxp.com \
--cc=sai.krishna.potthuri@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®