mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ardb+git@google.com>
To: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Ard Biesheuvel <ardb@kernel.org>,
	 Vincent Mailhol <mailhol@kernel.org>
Subject: [PATCH v3 4/9] efi/libstub: Use ucs2_string library for UTF-16 to UTF-8 conversion
Date: Wed, 16 Sep 2026 16:46:52 +0200	[thread overview]
Message-ID: <20260916144647.2651379-15-ardb+git@google.com> (raw)
In-Reply-To: <20260916144647.2651379-11-ardb+git@google.com>

From: Ard Biesheuvel <ardb@kernel.org>

Don't rely on sprintf() with a wide string conversion modifier to
convert the command line from UTF-16 to UTF-8. Instead, use the
existing ucs2 string library routine that does the same. Note that while
UEFI claims support for UTF-16, in practice it ignores surrogate pairs
entirely, and so the simplified UCS-2 character set (where each
character takes up exactly 2 bytes) is sufficient here.

This removes the only user of sprintf() in the EFI stub, so drop that
function as well.

Since boot memory is plentiful on UEFI systems, just establish a worst
case upper bound for the size of the buffer (which can never exceed
COMMAND_LINE_SIZE), and allocate that first. Then, perform the
conversion, and only fall back to processing the command line character
by character if that resulted in truncation. This makes the common
execution path much simpler.

Note that this no longer truncates the command line at the first
newline, but there is no evidence that this has ever been needed.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 drivers/firmware/efi/libstub/Makefile          |  3 +-
 drivers/firmware/efi/libstub/efi-stub-helper.c | 98 ++++++++------------
 drivers/firmware/efi/libstub/vsprintf.c        | 11 ---
 3 files changed, 39 insertions(+), 73 deletions(-)

diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index 77a2b2d74f3f..12c0c7deb5cb 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -66,7 +66,8 @@ KBUILD_AFLAGS			:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
 lib-y				:= efi-stub-helper.o gop.o secureboot.o tpm.o \
 				   file.o mem.o random.o randomalloc.o pci.o \
 				   skip_spaces.o lib-cmdline.o lib-ctype.o \
-				   alignedmem.o printk.o vsprintf.o
+				   alignedmem.o printk.o vsprintf.o \
+				   lib-ucs2_string.o
 
 # include the stub's libfdt dependencies from lib/ when needed
 libfdt-deps			:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c \
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index f27f2e1f0019..3dc365492301 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -12,6 +12,7 @@
 #include <linux/efi.h>
 #include <linux/kernel.h>
 #include <linux/overflow.h>
+#include <linux/ucs2_string.h>
 #include <asm/efi.h>
 #include <asm/setup.h>
 
@@ -334,81 +335,56 @@ char *efi_convert_cmdline(efi_loaded_image_t *image)
 {
 	const efi_char16_t *options = efi_table_attr(image, load_options);
 	u32 options_size = efi_table_attr(image, load_options_size);
-	int options_bytes = 0, safe_options_bytes = 0;  /* UTF-8 bytes */
-	unsigned long cmdline_addr = 0;
-	const efi_char16_t *s2;
-	bool in_quote = false;
+	unsigned long options_chars = 0;
+	unsigned long cmdline_bytes;
 	efi_status_t status;
-	u32 options_chars;
+	char *cmdline_addr;
 
 	if (options_size > 0)
 		efi_measure_tagged_event((unsigned long)options, options_size,
 					 EFISTUB_EVT_LOAD_OPTIONS);
 
 	efi_apply_loadoptions_quirk((const void **)&options, &options_size);
-	options_chars = options_size / sizeof(efi_char16_t);
-
-	if (options) {
-		s2 = options;
-		while (options_bytes < COMMAND_LINE_SIZE && options_chars--) {
-			efi_char16_t c = *s2++;
-
-			if (c < 0x80) {
-				if (c == L'\0' || c == L'\n')
-					break;
-				if (c == L'"')
-					in_quote = !in_quote;
-				else if (!in_quote && isspace((char)c))
-					safe_options_bytes = options_bytes;
-
-				options_bytes++;
-				continue;
-			}
-
-			/*
-			 * Get the number of UTF-8 bytes corresponding to a
-			 * UTF-16 character.
-			 * The first part handles everything in the BMP.
-			 */
-			options_bytes += 2 + (c >= 0x800);
-			/*
-			 * Add one more byte for valid surrogate pairs. Invalid
-			 * surrogates will be replaced with 0xfffd and take up
-			 * only 3 bytes.
-			 */
-			if ((c & 0xfc00) == 0xd800) {
-				/*
-				 * If the very last word is a high surrogate,
-				 * we must ignore it since we can't access the
-				 * low surrogate.
-				 */
-				if (!options_chars) {
-					options_bytes -= 3;
-				} else if ((*s2 & 0xfc00) == 0xdc00) {
-					options_bytes++;
-					options_chars--;
-					s2++;
-				}
-			}
-		}
-		if (options_bytes >= COMMAND_LINE_SIZE) {
-			options_bytes = safe_options_bytes;
-			efi_err("Command line is too long: truncated to %d bytes\n",
-				options_bytes);
-		}
-	}
+	if (options)
+		options_chars = ucs2_strnlen(options,
+					     options_size / sizeof(efi_char16_t));
 
-	options_bytes++;	/* NUL termination */
+	/* Each UCS-2 char takes up at most 3 UTF-8 bytes */
+	cmdline_bytes = min(3 * options_chars, COMMAND_LINE_SIZE - 1) + 3;
 
-	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, options_bytes,
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, cmdline_bytes,
 			     (void **)&cmdline_addr);
 	if (status != EFI_SUCCESS)
 		return NULL;
 
-	snprintf((char *)cmdline_addr, options_bytes, "%.*ls",
-		 options_bytes - 1, options);
+	if (ucs2_as_utf8_l(cmdline_addr, options, options_chars,
+			   cmdline_bytes) >= COMMAND_LINE_SIZE) {
+		/*
+		 * The output fills up the entire buffer, and may have been
+		 * truncated. Work backwards through the buffer to find a safe
+		 * truncation point (i.e., a blank character not inside a
+		 * quoted string).
+		 */
+		int safe_pos[2] = {};
+		int in_quote = 0;
+
+		for (int i = COMMAND_LINE_SIZE - 1; i >= 0; i--) {
+			char c = cmdline_addr[i];
+
+			if (!c)
+				return cmdline_addr;
+			else if (c == '"')
+				in_quote ^= 1;
+			else if (!safe_pos[in_quote] && isspace(c))
+				safe_pos[in_quote] = i;
+		}
+
+		efi_err("Command line is too long: truncated to %d bytes\n",
+			safe_pos[in_quote]);
+		cmdline_addr[safe_pos[in_quote]] = '\0';
+	}
 
-	return (char *)cmdline_addr;
+	return cmdline_addr;
 }
 
 /**
diff --git a/drivers/firmware/efi/libstub/vsprintf.c b/drivers/firmware/efi/libstub/vsprintf.c
index 71c71c222346..dba136679172 100644
--- a/drivers/firmware/efi/libstub/vsprintf.c
+++ b/drivers/firmware/efi/libstub/vsprintf.c
@@ -551,14 +551,3 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list ap)
 
 	return pos;
 }
-
-int snprintf(char *buf, size_t size, const char *fmt, ...)
-{
-	va_list args;
-	int i;
-
-	va_start(args, fmt);
-	i = vsnprintf(buf, size, fmt, args);
-	va_end(args);
-	return i;
-}
-- 
2.55.0.1032.g73a4cd73de-goog


  parent reply	other threads:[~2026-09-16 14:47 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-16 14:46 [PATCH v3 0/9] efi/libstub: Avoid UTF-16 conversion busywork Ard Biesheuvel
2026-09-16 14:46 ` [PATCH v3 1/9] lib/ucs2_string: Drop arbitrary input size limit and associated WARN() Ard Biesheuvel
2026-09-16 14:46 ` [PATCH v3 2/9] lib/ucs2_string: Suppress modinfo when __DISABLE_EXPORTS is set Ard Biesheuvel
2026-09-16 14:46 ` [PATCH v3 3/9] lib/ucs2_string: Split out ucs2_as_utf8_l() taking a separate limit Ard Biesheuvel
2026-09-16 14:46 ` Ard Biesheuvel [this message]
2026-09-16 14:46 ` [PATCH v3 5/9] efi/libstub: Avoid efi_puts() for compile time constant strings Ard Biesheuvel
2026-09-16 14:46 ` [PATCH v3 6/9] efi/libstub: Output UTF-16 directly from vsnprintf() Ard Biesheuvel
2026-09-16 14:46 ` [PATCH v3 7/9] efi/libstub: Add support for printing human readable GUIDs Ard Biesheuvel
2026-09-16 14:46 ` [PATCH v3 8/9] efi/libstub: Add efi_snprintf() to construct wide strings Ard Biesheuvel
2026-09-16 14:46 ` [PATCH v3 9/9] efi/libstub: add initial Boot Loader Interface support Ard Biesheuvel
2026-09-17  6:21 ` [PATCH v3 0/9] efi/libstub: Avoid UTF-16 conversion busywork Vincent Mailhol
2026-09-17  9:37   ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260916144647.2651379-15-ardb+git@google.com \
    --to=ardb+git@google.com \
    --cc=ardb@kernel.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mailhol@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®