From: "Nerijus Bendžiūnas" <nerijus.bendziunas@gmail.com>
To: "Toke Høiland-Jørgensen" <toke@toke.dk>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
"John W . Linville" <linville@tuxdriver.com>,
Simon Wunderlich <sw@simonwunderlich.de>,
Oleksij Rempel <linux@rempel-privat.de>,
Kalle Valo <kvalo@kernel.org>,
Jeff Johnson <jeff.johnson@oss.qualcomm.com>,
stable@vger.kernel.org
Subject: [PATCH ath-next v4 4/8] wifi: ath9k: stop a failed register read from opening the RX filter
Date: Wed, 16 Sep 2026 20:34:25 +0300 [thread overview]
Message-ID: <20260916173429.403889-5-nerijus.bendziunas@gmail.com> (raw)
In-Reply-To: <20260916173429.403889-1-nerijus.bendziunas@gmail.com>
On USB a register read is a WMI round trip and a timeout returns -1.
The spectral trigger reads AR_RX_FILTER back, ORs in the PHY error
bits and writes it, so a timed-out read stores 0xffffffff and the
device forwards every frame and PHY error to the host.
Add ath9k_hw_enable_rxfilter(), which sets the requested bits with
REG_SET_BIT() instead of reading the register from the driver, and
use it in the trigger. With firmware 1.4 and later the
read-modify-write is done by the firmware; older firmware still reads
from the host.
Fixes: e93d083f42a1 ("ath9k: add spectral scan feature")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@gmail.com>
---
.../net/wireless/ath/ath9k/common-spectral.c | 7 ++----
drivers/net/wireless/ath/ath9k/hw.c | 23 +++++++++++++++++++
drivers/net/wireless/ath/ath9k/hw.h | 1 +
3 files changed, 26 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.c b/drivers/net/wireless/ath/ath9k/common-spectral.c
index ca01a07f6630..73c1eb4ebe0e 100644
--- a/drivers/net/wireless/ath/ath9k/common-spectral.c
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.c
@@ -716,7 +716,6 @@ void ath9k_cmn_spectral_scan_trigger(struct ath_common *common,
struct ath_spec_scan_priv *spec_priv)
{
struct ath_hw *ah = spec_priv->ah;
- u32 rxfilter;
if (IS_ENABLED(CONFIG_ATH9K_TX99))
return;
@@ -730,10 +729,8 @@ void ath9k_cmn_spectral_scan_trigger(struct ath_common *common,
return;
ath_ps_ops(common)->wakeup(common);
- rxfilter = ath9k_hw_getrxfilter(ah);
- ath9k_hw_setrxfilter(ah, rxfilter |
- ATH9K_RX_FILTER_PHYRADAR |
- ATH9K_RX_FILTER_PHYERR);
+ ath9k_hw_enable_rxfilter(ah, ATH9K_RX_FILTER_PHYRADAR |
+ ATH9K_RX_FILTER_PHYERR);
/* TODO: usually this should not be necessary, but for some reason
* (or in some mode?) the trigger must be called after the
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index e08ab73fcacb..7cafd6c5870f 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2905,6 +2905,29 @@ void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits)
}
EXPORT_SYMBOL(ath9k_hw_setrxfilter);
+/**
+ * ath9k_hw_enable_rxfilter() - set RX filter bits without a driver-side read
+ * @ah: the atheros hardware data structure
+ * @bits: ATH9K_RX_FILTER_* bits to set
+ */
+void ath9k_hw_enable_rxfilter(struct ath_hw *ah, u32 bits)
+{
+ u32 phybits = 0;
+
+ if (bits & ATH9K_RX_FILTER_PHYRADAR)
+ phybits |= AR_PHY_ERR_RADAR;
+ if (bits & ATH9K_RX_FILTER_PHYERR)
+ phybits |= AR_PHY_ERR_OFDM_TIMING | AR_PHY_ERR_CCK_TIMING;
+
+ REG_SET_BIT(ah, AR_RX_FILTER, bits);
+
+ if (phybits) {
+ REG_SET_BIT(ah, AR_PHY_ERR, phybits);
+ REG_SET_BIT(ah, AR_RXCFG, AR_RXCFG_ZLFDMA);
+ }
+}
+EXPORT_SYMBOL(ath9k_hw_enable_rxfilter);
+
bool ath9k_hw_phy_disable(struct ath_hw *ah)
{
if (ath9k_hw_mci_is_enabled(ah))
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index b942b8303d8f..f102f73a0114 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1055,6 +1055,7 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah,
struct chan_centers *centers);
u32 ath9k_hw_getrxfilter(struct ath_hw *ah);
void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits);
+void ath9k_hw_enable_rxfilter(struct ath_hw *ah, u32 bits);
bool ath9k_hw_phy_disable(struct ath_hw *ah);
bool ath9k_hw_disable(struct ath_hw *ah);
void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test);
--
2.55.0
next prev parent reply other threads:[~2026-09-16 17:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-16 17:34 [PATCH ath-next v4 0/8] wifi: ath9k: fix register access and spectral scan filter handling on ath9k_htc Nerijus Bendžiūnas
2026-09-16 17:34 ` [PATCH ath-next v4 1/8] wifi: ath9k: return an error from a failed multi-register read Nerijus Bendžiūnas
2026-09-16 17:34 ` [PATCH ath-next v4 2/8] wifi: ath9k_htc: fix the byte count of a full RMW buffer flush Nerijus Bendžiūnas
2026-09-16 17:34 ` [PATCH ath-next v4 3/8] wifi: ath9k_htc: refuse a command that fills whole USB packets Nerijus Bendžiūnas
2026-09-16 17:34 ` Nerijus Bendžiūnas [this message]
2026-09-16 17:34 ` [PATCH ath-next v4 5/8] wifi: ath9k: clear the PHY error filter when a spectral scan is disabled Nerijus Bendžiūnas
2026-09-16 17:34 ` [PATCH ath-next v4 6/8] wifi: ath9k: count spectral samples in the driver's own RX stats Nerijus Bendžiūnas
2026-09-16 17:34 ` [PATCH ath-next v4 7/8] wifi: ath9k_htc: pass CRC-tagged spectral samples to the FFT parser Nerijus Bendžiūnas
2026-09-16 17:34 ` [PATCH ath-next v4 8/8] wifi: ath9k_htc: derive the PHY error filter bits from software state Nerijus Bendžiūnas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260916173429.403889-5-nerijus.bendziunas@gmail.com \
--to=nerijus.bendziunas@gmail.com \
--cc=jeff.johnson@oss.qualcomm.com \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=linville@tuxdriver.com \
--cc=stable@vger.kernel.org \
--cc=sw@simonwunderlich.de \
--cc=toke@toke.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®