[PATCH v5 08/10] media: platform: broadcom: Move unicam driver to subdir

[Jai Luthra <jai.luthra@ideasonboard.com>]

The BCM283x/BCM2711x SoCs capture camera frames using CSI-2, and
optionally process the raw frames using a VC4 firmware-based ISP block.

As the ISP driver will be added subsequently, move the files related to
the unicam driver to a separate subdirectory to ease distinction between
the two drivers' files.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
---
Changes in v4:
- Drop old paragraph in Kconfig that got copied from previous revision
---
 MAINTAINERS                                            |  2 +-
 drivers/media/platform/broadcom/Kconfig                | 17 ++---------------
 drivers/media/platform/broadcom/Makefile               |  2 +-
 drivers/media/platform/broadcom/bcm2835-unicam/Kconfig | 18 ++++++++++++++++++
 .../media/platform/broadcom/bcm2835-unicam/Makefile    |  3 +++
 .../{ => bcm2835-unicam}/bcm2835-unicam-regs.h         |  0
 .../broadcom/{ => bcm2835-unicam}/bcm2835-unicam.c     |  0
 7 files changed, 25 insertions(+), 17 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0ac9a9d7b215..68ef4b2f9db6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5185,7 +5185,7 @@ M:	Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
-F:	drivers/media/platform/broadcom/bcm2835-unicam*
+F:	drivers/media/platform/broadcom/bcm2835-unicam/*
 
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
diff --git a/drivers/media/platform/broadcom/Kconfig b/drivers/media/platform/broadcom/Kconfig
index 93ba565d9a02..cab44885182c 100644
--- a/drivers/media/platform/broadcom/Kconfig
+++ b/drivers/media/platform/broadcom/Kconfig
@@ -1,18 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
-config VIDEO_BCM2835_UNICAM
-	tristate "Broadcom BCM283x/BCM271x Unicam video capture driver"
-	depends on ARCH_BCM2835 || COMPILE_TEST
-	depends on COMMON_CLK && PM
-	depends on VIDEO_DEV
-	select MEDIA_CONTROLLER
-	select V4L2_FWNODE
-	select VIDEO_V4L2_SUBDEV_API
-	select VIDEOBUF2_DMA_CONTIG
-	help
-	  Say Y here to enable support for the BCM283x/BCM271x CSI-2 receiver.
-	  This is a V4L2 driver that controls the CSI-2 receiver directly,
-	  independently from the VC4 firmware.
+comment "Broadcom BCM283x/BCM271x media platform drivers"
 
-	  To compile this driver as a module, choose M here. The module will be
-	  called bcm2835-unicam.
+source "drivers/media/platform/broadcom/bcm2835-unicam/Kconfig"
diff --git a/drivers/media/platform/broadcom/Makefile b/drivers/media/platform/broadcom/Makefile
index 03d2045aba2e..33a89bdb0029 100644
--- a/drivers/media/platform/broadcom/Makefile
+++ b/drivers/media/platform/broadcom/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 
-obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o
+obj-y += bcm2835-unicam/
diff --git a/drivers/media/platform/broadcom/bcm2835-unicam/Kconfig b/drivers/media/platform/broadcom/bcm2835-unicam/Kconfig
new file mode 100644
index 000000000000..93ba565d9a02
--- /dev/null
+++ b/drivers/media/platform/broadcom/bcm2835-unicam/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config VIDEO_BCM2835_UNICAM
+	tristate "Broadcom BCM283x/BCM271x Unicam video capture driver"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on COMMON_CLK && PM
+	depends on VIDEO_DEV
+	select MEDIA_CONTROLLER
+	select V4L2_FWNODE
+	select VIDEO_V4L2_SUBDEV_API
+	select VIDEOBUF2_DMA_CONTIG
+	help
+	  Say Y here to enable support for the BCM283x/BCM271x CSI-2 receiver.
+	  This is a V4L2 driver that controls the CSI-2 receiver directly,
+	  independently from the VC4 firmware.
+
+	  To compile this driver as a module, choose M here. The module will be
+	  called bcm2835-unicam.
diff --git a/drivers/media/platform/broadcom/bcm2835-unicam/Makefile b/drivers/media/platform/broadcom/bcm2835-unicam/Makefile
new file mode 100644
index 000000000000..03d2045aba2e
--- /dev/null
+++ b/drivers/media/platform/broadcom/bcm2835-unicam/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o
diff --git a/drivers/media/platform/broadcom/bcm2835-unicam-regs.h b/drivers/media/platform/broadcom/bcm2835-unicam/bcm2835-unicam-regs.h
similarity index 100%
rename from drivers/media/platform/broadcom/bcm2835-unicam-regs.h
rename to drivers/media/platform/broadcom/bcm2835-unicam/bcm2835-unicam-regs.h
diff --git a/drivers/media/platform/broadcom/bcm2835-unicam.c b/drivers/media/platform/broadcom/bcm2835-unicam/bcm2835-unicam.c
similarity index 100%
rename from drivers/media/platform/broadcom/bcm2835-unicam.c
rename to drivers/media/platform/broadcom/bcm2835-unicam/bcm2835-unicam.c

-- 
2.55.0