From: Jiayuan Chen <jiayuan.chen@linux.dev>
To: bpf@vger.kernel.org
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>,
Emil Tsalapatis <emil@etsalapatis.com>,
Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Andrii Nakryiko <andrii@kernel.org>,
Eduard Zingerman <eddyz87@gmail.com>,
Kumar Kartikeya Dwivedi <memxor@gmail.com>,
Martin KaFai Lau <martin.lau@linux.dev>,
Song Liu <song@kernel.org>,
Yonghong Song <yonghong.song@linux.dev>,
Jiri Olsa <jolsa@kernel.org>,
Ihor Solodrai <ihor.solodrai@linux.dev>,
John Fastabend <john.fastabend@gmail.com>,
Shuah Khan <shuah@kernel.org>,
linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org
Subject: [PATCH bpf-next v7 2/4] bpf: arena: allocate the fault-in page outside the lock
Date: Thu, 17 Sep 2026 09:55:07 +0800 [thread overview]
Message-ID: <20260917015618.7488-3-jiayuan.chen@linux.dev> (raw)
In-Reply-To: <20260917015618.7488-1-jiayuan.chen@linux.dev>
arena_vm_fault() allocated the page while holding arena->spinlock, so it
could only use the non-blocking allocator, which never reclaims. Once the
memcg is at memory.max that allocation just fails, the fault turns into
VM_FAULT_SIGSEGV, and the process gets a SIGSEGV on a perfectly valid
arena address. Hitting memory.max is routine (e.g. page cache from
reading a big file), so this kills innocent processes over memory that
reclaim could have freed.
Rework the fault handler:
- Preallocate the page before taking the lock, like do_anonymous_page()
does, so it can sleep and reclaim, instead of turning a routine
memory.max into a fake segfault. The allocation never invokes the OOM
killer, see bpf_map_alloc_page_sleepable().
- On allocation failure fall through to the locked recheck rather than
failing right away: a page a concurrent allocator installed meanwhile
is used, otherwise the non-blocking fallback fails and we return
VM_FAULT_SIGBUS. Not VM_FAULT_OOM: nothing ran the OOM killer, and the
fault path would just retry it forever.
- A lockless probe skips that preallocation when a page is already mapped
(e.g. allocated by the bpf program), so the common case wastes no
allocation. The rare race where such a page is freed before we take the
lock falls back to the non-blocking allocator under the lock.
- Return VM_FAULT_SIGBUS for the other non-recoverable errors (lock
failure, range-tree and page-table failures) instead of
VM_FAULT_SIGSEGV; only BPF_F_SEGV_ON_FAULT, and a scratch-page hole
under that flag, is a real user addressing error and keeps
VM_FAULT_SIGSEGV.
- Tidy up the error labels.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
---
kernel/bpf/arena.c | 86 +++++++++++++++++++++++++++++++++++-----------
1 file changed, 66 insertions(+), 20 deletions(-)
diff --git a/kernel/bpf/arena.c b/kernel/bpf/arena.c
index 7b6847200b431..e3c8b6086bbee 100644
--- a/kernel/bpf/arena.c
+++ b/kernel/bpf/arena.c
@@ -481,7 +481,8 @@ static vm_fault_t arena_vm_fault(struct vm_fault *vmf)
struct bpf_map *map = vmf->vma->vm_file->private_data;
struct bpf_arena *arena = container_of(map, struct bpf_arena, map);
struct mem_cgroup *new_memcg, *old_memcg;
- struct page *page;
+ struct page *page, *new_page = NULL;
+ vm_fault_t fault_ret;
long kbase, kaddr;
unsigned long flags;
int ret;
@@ -489,59 +490,104 @@ static vm_fault_t arena_vm_fault(struct vm_fault *vmf)
kbase = bpf_arena_get_kern_vm_start(arena);
kaddr = kbase + (u32)(vmf->address);
- if (raw_res_spin_lock_irqsave(&arena->spinlock, flags))
+ page = vmalloc_to_page((void *)kaddr);
+ if (!page && !(arena->map.map_flags & BPF_F_SEGV_ON_FAULT)) {
+ /*
+ * Preallocate outside the lock with a sleepable allocator so it
+ * can reclaim, which the non-blocking allocator under
+ * arena->spinlock cannot; it never invokes the OOM killer, see
+ * bpf_map_alloc_page_sleepable(). On failure fall through
+ * anyway: the locked recheck below picks up a page a concurrent
+ * allocator may have installed meanwhile, and otherwise the
+ * non-blocking fallback fails and we return VM_FAULT_SIGBUS.
+ * Not VM_FAULT_OOM: nothing ran the OOM killer, and the fault
+ * path would just retry it forever.
+ */
+ bpf_map_memcg_enter(&arena->map, &old_memcg, &new_memcg);
+ new_page = bpf_map_alloc_page_sleepable(map);
+ bpf_map_memcg_exit(old_memcg, new_memcg);
+ }
+
+ if (raw_res_spin_lock_irqsave(&arena->spinlock, flags)) {
/*
* A failed lock means a possible deadlock was detected. Don't
* return VM_FAULT_RETRY: this handler never took mmap_lock, but
* the fault path would re-take it on retry and deadlock. Fail.
*/
+ if (new_page)
+ free_pages_nolock(new_page, 0);
return VM_FAULT_SIGBUS;
+ }
page = vmalloc_to_page((void *)kaddr);
if (page) {
- if (page == arena->scratch_page)
+ if (page == arena->scratch_page) {
/* BPF triggered scratch here; don't lazy-alloc over it */
- goto out_sigsegv;
+ fault_ret = (arena->map.map_flags & BPF_F_SEGV_ON_FAULT) ?
+ VM_FAULT_SIGSEGV : VM_FAULT_SIGBUS;
+ goto out_err_locked;
+ }
/* already have a page vmap-ed */
goto out;
}
+ if (arena->map.map_flags & BPF_F_SEGV_ON_FAULT) {
+ /* User space requested to segfault when page is not allocated by bpf prog */
+ fault_ret = VM_FAULT_SIGSEGV;
+ goto out_err_locked;
+ }
+
bpf_map_memcg_enter(&arena->map, &old_memcg, &new_memcg);
- if (arena->map.map_flags & BPF_F_SEGV_ON_FAULT)
- /* User space requested to segfault when page is not allocated by bpf prog */
- goto out_sigsegv_memcg;
+ if (!new_page) {
+ /*
+ * No page in hand: either the lockless probe saw a page (a bpf
+ * program page or the scratch page) so we skipped preallocation
+ * but a concurrent bpf_arena_free_pages() cleared it before we
+ * took the lock, or the sleepable preallocation failed. We need
+ * one now and cannot sleep here, so try the non-blocking
+ * allocator and give up if it fails.
+ */
+ ret = bpf_map_alloc_pages(map, map->numa_node, 1, &new_page);
+ if (ret) {
+ fault_ret = VM_FAULT_SIGBUS;
+ goto out_err_locked_memcg;
+ }
+ }
ret = range_tree_clear(&arena->rt, vmf->pgoff, 1);
- if (ret)
- goto out_sigsegv_memcg;
-
- struct apply_range_data data = { .arena = arena, .pages = &page, .i = 0 };
- /* Account into memcg of the process that created bpf_arena */
- ret = bpf_map_alloc_pages(map, NUMA_NO_NODE, 1, &page);
if (ret) {
- range_tree_set(&arena->rt, vmf->pgoff, 1);
- goto out_sigsegv_memcg;
+ fault_ret = VM_FAULT_SIGBUS;
+ goto out_err_locked_memcg;
}
+ struct apply_range_data data = { .arena = arena, .pages = &new_page, .i = 0 };
ret = apply_to_page_range(&init_mm, kaddr, PAGE_SIZE, apply_range_set_cb, &data);
if (ret) {
range_tree_set(&arena->rt, vmf->pgoff, 1);
- free_pages_nolock(page, 0);
- goto out_sigsegv_memcg;
+ fault_ret = VM_FAULT_SIGBUS;
+ goto out_err_locked_memcg;
}
flush_vmap_cache(kaddr, PAGE_SIZE);
bpf_map_memcg_exit(old_memcg, new_memcg);
+ /* new_page was consumed */
+ page = new_page;
+ new_page = NULL;
out:
page_ref_add(page, 1);
raw_res_spin_unlock_irqrestore(&arena->spinlock, flags);
+ if (new_page)
+ free_pages_nolock(new_page, 0);
vmf->page = page;
return 0;
-out_sigsegv_memcg:
+
+out_err_locked_memcg:
bpf_map_memcg_exit(old_memcg, new_memcg);
-out_sigsegv:
+out_err_locked:
raw_res_spin_unlock_irqrestore(&arena->spinlock, flags);
- return VM_FAULT_SIGSEGV;
+ if (new_page)
+ free_pages_nolock(new_page, 0);
+ return fault_ret;
}
static const struct vm_operations_struct arena_vm_ops = {
--
2.43.0
next prev parent reply other threads:[~2026-09-17 1:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-17 1:55 [PATCH bpf-next v7 0/4] bpf: arena: handle memory.max on fault-in with reclaim/OOM Jiayuan Chen
2026-09-17 1:55 ` [PATCH bpf-next v7 1/4] bpf: Add a sleepable page allocator for map memory Jiayuan Chen
2026-09-17 2:17 ` Alexei Starovoitov
2026-09-17 1:55 ` Jiayuan Chen [this message]
2026-09-17 1:55 ` [PATCH bpf-next v7 3/4] selftests/bpf: Add read_cgroup_file() to cgroup_helpers Jiayuan Chen
2026-09-17 1:55 ` [PATCH bpf-next v7 4/4] selftests/bpf: Add a test for arena fault-in under memory.max Jiayuan Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260917015618.7488-3-jiayuan.chen@linux.dev \
--to=jiayuan.chen@linux.dev \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=eddyz87@gmail.com \
--cc=emil@etsalapatis.com \
--cc=ihor.solodrai@linux.dev \
--cc=john.fastabend@gmail.com \
--cc=jolsa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=martin.lau@linux.dev \
--cc=memxor@gmail.com \
--cc=shuah@kernel.org \
--cc=song@kernel.org \
--cc=yonghong.song@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®